Canon Projector WUX10 Mark II User Manual
Here you can view all the pages of manual Canon Projector WUX10 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
101Setting Various Function
Setting Up Functions from Menus
Resetting the Lamp Counter
[Other settings] - [Lamp counter]
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played.
Select the [Reset] and press the OK but-
ton.Select [OK] on the screen for confirmation,
press the OK button, and the lamp counter
is reset.
Press the MENU button.
■About the Display of the...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-100.png "Page 101
101Setting Various Function
Setting Up Functions from Menus
Resetting the Lamp Counter
[Other settings] - [Lamp counter]
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played.
Select the [Reset] and press the OK but-
ton.Select [OK] on the screen for confirmation,
press the OK button, and the lamp counter
is reset.
Press the MENU button.
■About the Display of the...")
101Setting Various Function Setting Up Functions from Menus Resetting the Lamp Counter [Other settings] - [Lamp counter] You can reset the lamp counter that indi- cates the timing to replace the projector when you replace it. Press the OK button after selecting [Lamp counter], and the lamp counter is dis- played. Select the [Reset] and press the OK but- ton.Select [OK] on the screen for confirmation, press the OK button, and the lamp counter is reset. Press the MENU button. ■About the Display of the...
Page 102
![Page 102
Setting Various Function
102
Over 2,000 hours
Displayed in green, yellow and red bar.
A message “Replace with the new lamp.”
appears when power is turned on.
Turning On/Off the Network Function
[Other settings] -[Network function]
You can save power if you turn off the net-
work function when you don’t use the net-
work function.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
OffYou can save energy by...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-101.png "Page 102
Setting Various Function
102
Over 2,000 hours
Displayed in green, yellow and red bar.
A message “Replace with the new lamp.”
appears when power is turned on.
Turning On/Off the Network Function
[Other settings] -[Network function]
You can save power if you turn off the net-
work function when you don’t use the net-
work function.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
OffYou can save energy by...")
Setting Various Function 102 Over 2,000 hours Displayed in green, yellow and red bar. A message “Replace with the new lamp.” appears when power is turned on. Turning On/Off the Network Function [Other settings] -[Network function] You can save power if you turn off the net- work function when you don’t use the net- work function. Press the OK button to accept your setting and then press the MENU button. [Off] is the factory default. HDMICOMPONENT DIGITAL PCVIDEO ANALOG PC OffYou can save energy by...
Page 103
![Page 103
103Setting Various Function
Setting Up Functions from Menus
Initializing network settings
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
Initialized are “IP address” and other
items set in Connecting the Projector to
Network (P105).
You can do this...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-102.png "Page 103
103Setting Various Function
Setting Up Functions from Menus
Initializing network settings
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
Initialized are “IP address” and other
items set in Connecting the Projector to
Network (P105).
You can do this...")
103Setting Various Function Setting Up Functions from Menus Initializing network settings [Other settings] -[Network setting initialization] You can Initialize the network settings. Press the OK button after selecting [Net- work setting initialization], and the follow- ing screen for confirmation appears: Press the OK button to accept your setting and then press the MENU button. Initialized are “IP address” and other items set in Connecting the Projector to Network (P105). You can do this...
Page 104
![Page 104
104
Checking the Information of the Projector
[Information]
You can confirm the information about the
signal types of the images projected and
other projector-specific information.
Information shown
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
ItemMeaning
Model nameModel name of this projector
Input signalDetails of the input signal currently selected
“Type of signal”, “resolution of signal”, “frequency” and
other information is shown.
FirmwareCurrent firmware version
Serial no.Serial number unique to this...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-103.png "Page 104
104
Checking the Information of the Projector
[Information]
You can confirm the information about the
signal types of the images projected and
other projector-specific information.
Information shown
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
ItemMeaning
Model nameModel name of this projector
Input signalDetails of the input signal currently selected
“Type of signal”, “resolution of signal”, “frequency” and
other information is shown.
FirmwareCurrent firmware version
Serial no.Serial number unique to this...")
104 Checking the Information of the Projector [Information] You can confirm the information about the signal types of the images projected and other projector-specific information. Information shown HDMICOMPONENT DIGITAL PCVIDEO ANALOG PC ItemMeaning Model nameModel name of this projector Input signalDetails of the input signal currently selected “Type of signal”, “resolution of signal”, “frequency” and other information is shown. FirmwareCurrent firmware version Serial no.Serial number unique to this...
Page 105
105 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index Connecting the Projector to Network
Page 106
106 Setting an IP Address It is possible to send an error notification e-mail (P115) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps below. (The examples shown are Windows XP screenshot images.) ■Setting IP Address of the Computer 1Connect the projector and a computer directly via a cross or straight type LAN cable. 2Turn on the power of the projector...
Page 107
![Page 107
107Setting an IP Address
Connecting the Projector to Network
8When you have specified the settings, click the [OK] button and then click the [OK] but-
ton on the [Local Area Connection Properties] window to close it.
■Resetting the IP Address Setting of the Computer
1Turn off the projector and remove the LAN cable.
2Follow the step 3 to 6 to restore the network setting to the original setting.](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-106.png "Page 107
107Setting an IP Address
Connecting the Projector to Network
8When you have specified the settings, click the [OK] button and then click the [OK] but-
ton on the [Local Area Connection Properties] window to close it.
■Resetting the IP Address Setting of the Computer
1Turn off the projector and remove the LAN cable.
2Follow the step 3 to 6 to restore the network setting to the original setting.")
107Setting an IP Address Connecting the Projector to Network 8When you have specified the settings, click the [OK] button and then click the [OK] but- ton on the [Local Area Connection Properties] window to close it. ■Resetting the IP Address Setting of the Computer 1Turn off the projector and remove the LAN cable. 2Follow the step 3 to 6 to restore the network setting to the original setting.
Page 108
![Page 108
108
Setting Network
■Displaying the Network Configuration Screen
1Turn on the computer and projector.
2Launch a web browser, enter http://192.168.254.254 in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3In the password input screen, enter root for [User name] and system for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The following...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-107.png "Page 108
108
Setting Network
■Displaying the Network Configuration Screen
1Turn on the computer and projector.
2Launch a web browser, enter http://192.168.254.254 in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3In the password input screen, enter root for [User name] and system for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The following...")
108 Setting Network ■Displaying the Network Configuration Screen 1Turn on the computer and projector. 2Launch a web browser, enter http://192.168.254.254 in the address bar, and press the Enter key. The password input screen appears. The supported web browsers is Microsoft Internet Explorer 6 or later. 3In the password input screen, enter root for [User name] and system for [Password] and click the [OK] button. The projector network configuration screen appears on the web browser. The following...
Page 109
![Page 109
109Setting Network
Connecting the Projector to Network
■Setting the Network
1In the menu screen, click [Password], input the new user name and password, and
click the [OK] button.
Setting items:
[User name]: The user name for logging in the network
[New password]: The new password
[Confirm new password]: The password for confirmation
2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
Setting items:
[IP address]: The IP address of the projector
[Subnet mask]:...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-108.png "Page 109
109Setting Network
Connecting the Projector to Network
■Setting the Network
1In the menu screen, click [Password], input the new user name and password, and
click the [OK] button.
Setting items:
[User name]: The user name for logging in the network
[New password]: The new password
[Confirm new password]: The password for confirmation
2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
Setting items:
[IP address]: The IP address of the projector
[Subnet mask]:...")
109Setting Network Connecting the Projector to Network ■Setting the Network 1In the menu screen, click [Password], input the new user name and password, and click the [OK] button. Setting items: [User name]: The user name for logging in the network [New password]: The new password [Confirm new password]: The password for confirmation 2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button. Setting items: [IP address]: The IP address of the projector [Subnet mask]:...
Page 110
![Page 110
Setting Network
110
3Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail server
[SMTP...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-109.png "Page 110
Setting Network
110
3Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail server
[SMTP...")
Setting Network 110 3Click [Mail], enter appropriate values in the following field for the error report, and click the [OK] button. Setting items: [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted) [From:]: The sender of the E-mail (the projector) [SMTP server IP address]: The IP address of the available SMTP mail server [SMTP...