Canon Projector WUX10 Mark II User Manual

11
Safety Instructions
Safety Instructions
Before operating this projector, read this manual thoroughly in order to operate the 
projector properly.
This projector offers many convenient features and functions. Operating the projector 
properly enables you to manage those features and maintain it in good condition for a 
long period.
Improper operation may result in not only reducing the product-life, but also malfunctions, 
fire hazards, or other accidents.
If your projector is not operating correctly,...

Safety Instructions
12
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
 This projector projects intense light from the projection lens. Do not stare directly into 
the lens if possible, as doing so may result in eye damage. Be especially careful that 
children do not stare directly into the beam.
 Install the projector in an appropriate position.
Installing the projector in an inappropriate position may result in a fire...

13Safety Instructions
Safety Instructions
■READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the 
product.
Read all of the instructions given here and retain them for later use. Unplug this projector 
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the...

Safety Instructions
14
Never push objects of any kind into this projector through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the 
marking label. If you are not sure of the type of power supplied, consult...

15Safety Instructions
Safety Instructions
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the 
country you purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND 
EASILY ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is 
listed by the Underwriters Laboratories (UL) and certified by the 
Canadian Standard Association (CSA).
The AC Power Cord has a...

Safety Instructions
16
Federal Communication Commission Notice
Multimedia Projector, Model: WUX10 MarkII
This device complies with Part 15 of the FCC Rules.  Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15...

17Safety Instructions
Safety Instructions
Precautions on Handling the Batteries in the Remote Controller
Lamp Handling Precautions
This projector uses a high-pressure mercury lamp which must be handled carefully and 
correctly as mentioned below.
The mercury lamp has the following characteristics.
 A lamp may explode with a loud sound or burn out due to a shock, scratch, or use 
beyond its expiry date.
 The lamp life may differ from lamp to lamp and according to the usage environment. 
There is no...

Safety Instructions
18
Carrying/Transporting the Projector
Installation Precautions
Disposal of Waste Lamp
 Dispose of the projectors mercury lamp according to local regulations just 
like the fluorescent lamps.
 This projector is a precision machine. Do not subject the projector to strong 
shocks or vibrations or turn it down.
 Install the lens cap to protect the lens and put the projector in the carrying 
bag to protect it from dust and scratches on the surface of it when you carry 
the projector....

19Safety Instructions
Safety Instructions
When placing the projector on a castered stand or table, be sure to lock the 
casters.
 Failure to do so may cause the projector to move or topple, resulting in an 
injury.
Position the projector in a horizontal position.
 Install the projector correctly. Incorrect 
installation may cause troubles and acci-
dents.
 Do not tilt the projector more than 20 
degrees above and below the horizontal.
 When you want to use your projector point-
ing up or down, make...

20