Canon printer PIXMA SELPHY DS810 User Manual

							Printing from the Memory Card
39
3Select a photo to print.
(1) Use the WX buttons to display the photo you want to print.
(2) Press the OK button.
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
4Print a sample.
If you have already printed a sample or you want to omit this procedure, select 
No to skip to the step 5.
(1) Use the ST buttons to select Ye s, then press the OK button.
(2) Confirm your print settings.
Press the Settings button to change print settings if necessary.
(3) Press the Print button.
A sample is printed.
5Select a hue.
After printing a sample, the hue selection screen is displayed on the LCD.
Refer to the sample photo, and select the number of the hue you like. 
						

							Printing from the Memory Card
40
Note
Depending on the paper you use, you may need to wait for a few minutes to let the 
colors settle. Wait until the colors of the sample photo settle, then select the number of 
the hue that you like.
6Start printing.
(1) Confirm your print settings.
Press the Settings button to change print settings if necessary. See “To Change 
Print Setting” on page 24.
(2) Use the ST buttons to set the number of copies you want to print.
(3) Press the Print button.
The photo will be printed in your favorite color tone.
(1) Use the STW X buttons to select the number of 
the hue that you like.
(2) Press the OK button.
The print confirmation screen is displayed.
Sample photo
Bright/Soft
Brightness/Contrast
Dark/Sharp
Ye l l o wColor toneRed 
						

							Printing from the Memory Card
41
„Other Print Functions
Print studio also contains the following print menus.
• Print all photos
You can print all photos saved on a memory card.
• Photo Index print
You can print a list of all photos saved in the memory card.
•DPOF print
If DPOF (Digital Print Order Format) settings are made on the camera, 
photos are printed automatically according to those settings.
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select a print menu.
(1) Press the Menu button.
(2) Use the WX buttons to select Print studio and then press the OK button.
(3) Use the WX buttons to select a print menu, and press the OK button.
Note
When using index printing, the number of images printed on a single sheet of 
paper depends on the page size, as follows:
– 4"×6"/101.6×152.4 mm: 24 images
– Credit card: 6 images
Notes
• This printer allows you to make the following DPOF settings:
–Image format: CIFF, Exif (Tiff), and JFIF
–Print type - Standard: The Photos for which you specified Standard using the 
DPOF function are printed.
–Print type - Index: The photos for which you specified Index using the DPOF 
function are printed according to the index print layout.
–Photos to Print: Only the photos specified using the DPOF function is printed 
(photos cannot be specified from the operation panel).
–Copies: photos are printed according to the numbers of copies specified 
using the DPOF function (numbers of copies cannot be specified from the 
operation panel).
– Other functions (addition of comments, trimming/rotation, etc.) are not 
supported.
• Photos are automatically scaled according to the page size. The upper, lower, 
left, and/or right portion(s) of the photo may be missing depending on the size 
of the paper you use.
• The shooting date format is as specified in the DPOF setting from DPOF print. 
						

							Printing from the Memory Card
42
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
3Start printing.
(1) Confirm your settings.
To change any of the settings, press the Settings button.
See “To Change Print Setting” on page 24.
(2) Use the ST buttons to set the number of copies you want to print.
You cannot select print quantities for DPOF print.
(3) Press the Print button.
Print all photos: All photos saved on the memory card are printed.
Photo Index print: A list of all photos saved on the memory card is printed.
DPOF print: The photos are printed according to the DPOF information on the 
memory card. 
						

							Printing from the Memory Card
43
Changing the Other Settings
This section explains the setting menu in the Device settings.
1Turn on the printer.
2Press the Menu button.
3Use the WX buttons to select Tool box and then press the OK button.
4Use the WX buttons to select Device settings and then press the OK
button.
For the rest of the procedures, see each setting menu.
Date display
You can change the format for printing the date.
(1) Use the ST buttons to select Other settings and then press the OK button.
(2) Use the ST buttons to select Date display and then press the OK button.
(3) Use the ST buttons to select the date display format and then press the OK
button.
Note
The shooting date format is as specified in the DPOF setting from DPOF print.
Adjust contrast
You can adjust contrast of the LCD, if it is too high or too low. This adjustment 
does not operate on printings.
(1) Use the ST buttons to select Other settings and then press the OK button.
(2) Use the ST buttons to select Adjust contrast and then press the OK button.
(3) Use the WX buttons to increase or decrease contrast and then press the OK
button.
Slide show setting
You can select whether to display photos quickly or in fine detail during the 
slide show.
(1) Use the ST buttons to select Other settings and then press the OK button.
(2) Use the ST buttons to select Slide show setting and then press the OK button.
(3) Use the ST buttons to select Image quality: Std or Image quality: High and then 
press the OK button. 
						

							Printing from the Memory Card
44
Language selection
You can change the language displayed on the LCD.
(1) Use the ST buttons to select Language selection and then press the OK button.
(2) Use the ST buttons to select a language and then press the OK button.
Reset setting
You can reset all settings, other than the display language and the Print Head 
position, to the initial state.
(1) Use the ST buttons to select Reset setting and then press the OK button.
(2) Use the ST buttons to select Ye s and then press the OK button. 
						

							Printing Photographs Directly from a Digital Camera
45
Printing Photographs Directly from a 
Digital Camera
Printing Photographs Directly from a PictBridge 
Compliant Device
Connecting a PictBridge compliant device such as digital camera, camcorder or 
mobile phone to the printer allows you to print recorded images directly without 
using a computer.
Notes
• PictBridge is an Industry standard enabling a range of digital photo solutions, 
including the direct printing of photos from a digital still camera, camcorder or 
mobile phone* without the need to use a computer.
• Canon Bubble Jet Direct allows you to print photos from a Canon Bubble Jet Direct 
compatible (PictBridge incompatible) digital camera or digital video camcorder 
without a computer by simply connecting the digital camera or digital video 
camcorder to this printer.
* Hereafter, the PictBridge compliant digital still camera, digital camcorder camera 
equipped mobile phone are collectively called a PictBridge compliant device.
„Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this printer, use the USB cable 
supplied with the device.
Do not connect any equipment other than PictBridge compliant devices, Canon Bubble 
Jet compatible camera, or the Bluetooth unit (option) to the Direct Print Port of the 
printer. If you do so, electric shock, fire, or damage to the device could result.
Note
When producing photos with the digital device connected to the printer, it is advisable 
to use the AC adapter supplied with the device. If you use the device battery, be sure to 
charge it fully.
1Set up the printer for printing.
See “Easy Setup Instructions” on page 3.
2Turn on the printer.
See “Turning On the Printer” on page 16. 
						

							Printing Photographs Directly from a Digital Camera
46
3Load the 101.6×152.4mm/4"×6" paper into the Paper Support in the 
portrait position (feed from the short side) with the print side facing up.
4Connect the PictBridge compliant device to the printer.
Note
Depending on the model or brand of your device, you may have to select a mode of 
printing photos compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting 
the device to the printer.
Perform necessary operations according to the instruction manual supplied with your 
device.
(1) Ensure that the device is turned off.
(2)
Connect the camera to the printer using the USB cable (for connection to a computer) 
supplied with the device
.
Note
Some types of the PictBridge compliant devices turn on automatically when connected 
to the printer. If the device not turns on automatically, turn it on manually.
(3) Turn on and set up the device for direct printing.
When the connection between the device and printer has been established, the 
POWER lamp on the printer flashes twice.
* The power-on sequence may differ depending on the model or brand of the 
device.
Either of the following icons will display on the LCD display of the device when 
the printer is correctly connected.
A PictBridge compliant device.
* This mark indicates that the product is PictBridge-compatible.
A Canon Bubble Jet Direct compatible digital camera.
If the icon does not appear, see “Cannot Print Properly from the Digital 
Camera” on page 81. 
						

							Printing Photographs Directly from a Digital Camera
47
„Confirming or Changing the Device Settings
To change the paper size or paper type, operate the device to select the 
PictBridge print setup mode and confirm or change the settings.
The settings below can be changed by pressing the S
Settings button when the 
device is connected. However, changes can be made on the Settings screen 
only when the corresponding items below are in D
Default (selections based on 
the printer setting) using the controls of the device.
About the Settings Explained Below
The settings explained on the following pages cannot be made on some 
devices. If any setting cannot be made, the default setting explained above is 
used.
Names of settings that are displayed on Canon PictBridge compliant devices 
are used in the description given below.
Different names may be displayed on your device depending on the brand or 
model.
For details, refer to your device’s instruction manual.
„About Image Data Format for Printing
This printer accepts images* taken with a camera compatible with the Design 
rule for Camera FIle system and PNG files. 
*Exif 2.21 compliant
„About “Paper size” and “Paper type” 
When you have selected DDefault (selections based on the printer setting), the 
printer operates based on the Settings screen. To print on Photo Paper Pro, 
select F
Fast Photo from PPaper type on the display of the device. Select PPhoto for 
PictBridge compliant device 
setting itemsPrinter setting on the Settings screen
Paper size: Default  You can change the printer settings on tab1.
See “Print Setting Items” on page 25. Paper type: Default 
Layout: Default 
Image Optimize: Default You can change the printer settings on tab2.
See “Print Setting Items” on page 25. 
						

							Printing Photographs Directly from a Digital Camera
48
Photo Paper Plus Glossy. The following sizes and types of paper can be loaded 
in the printer by selecting options from P
Paper size and PPaper type.
* Sticker media manufactured by Canon. Set Paper size to 10
×15cm/4"×6"
when printing stickers.
„About “Layout” and “Trimming”
For LLayout, when you have selected DDefault (selections based on the printer 
setting), the printer operates based on the Settings screen.
Note
When printing onto Photo Stickers (PS-101) (16-up), use the following settings.
1 Load the paper.
2 Select 1
10× 15 cm/4" × 6" for the PPaper size, and PPhoto for the PPaper type.
3 Select N-up for Layout, then select 16.
Some PictBridge compliant devices display the Layout option; 2
2-up,44-up,99-up, and 
16-up. In this case always select 16-up. If there are no options on the PictBridge 
compliant device that correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is 
not possible.
By default, OOff (NNo trimming) is selected for TTrimming.
„About “Image optimize”
When you have selected DDefault (selections based on the printer setting), the 
printer operates based on the Settings screen. 
If you use a Canon PictBridge-compliant device, you can select V
VIVID,NNR,
VIVID+NR, or F
Face. (Note that these options cannot be selected for some 
models.)
Notes
•When VVIVID is selected, green and blue portions of photos are printed vividly.
•When N
NR (Noise Reduction) is selected, noise in blue portions, such as the sky, and 
dark portions is removed.
•When V
VIVID+NR is selected, functions of both VVIVID and NNR are performed.
•When 
 Face is selected, backlit images are corrected when printed.
“Paper size” setting“Paper type” settingPaper loaded in printer
10×15 cm / 4"×6" Photo Photo Paper Plus Glossy
Photo Paper Plus 
Semi-gloss
Glossy Photo Paper
Photo Stickers*
Fast Photo Photo Paper Pro
5.4×8.6 cm / Credit Card Photo Glossy Photo Paper Credit 
Card