Canon printer PIXMA SELPHY DS810 User Manual

							Appendix
89
Additional System Requirements for On-screen Manual
Browser: Windows HTML Help Viewer
Note: Microsoft
® Internet Explorer 5.0 or later must 
be installed.
The On-screen Manual may not be displayed 
properly depending on your operating system or 
Internet Explorer version. We recommend that you 
keep your system up to date with Windows Update.Browser: Help Viewer
Note: The On-screen Manual may not be displayed 
properly depending on your operating system. We 
recommend that you keep your system up to date. 
						

							Appendix
90
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that 
you use your printer safely. Do not attempt to use printer in any way not described 
in this manual.
You may cause an electric shock/fire or damage the printer if you ignore any of these safety 
precautions.
Choosing a LocationDo not place the printer close to flammable solvents such as alcohol or thinners.
Power supplyNever attempt to plug in or unplug the printer from the power supply when your hands are 
wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist the power 
cord. Do not place heavy objects on the power cord.
Never plug the printer into a power socket that is shared with other 
equipment (extension lead/cord, 2- or 3-way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the printer, immediately unplug 
the printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off any 
dust or dirt collected on the plug and the power outlet.
If the printer is placed at a location exposed to a lot of dust, smoke, or 
high humidity, the dust collected on the plug absorbs moisture and 
may cause insulation failure and fire.
Cleaning the printerUse a damp cloth to clean the printer. Never use flammable solvents 
such as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical components 
inside the printer, it could cause a fire or electric shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage 
the printer.
Maintaining the 
printerDo not attempt to disassemble or modify the printer. There are no user serviceable parts 
inside the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not 
described in this guide.
Working around the 
printerDo not use flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical 
components inside the printer. 
						

							Appendix
91
You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a locationDo not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, 
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation 
free).
Do not place the printer on a thick rug or carpet.
Power supplyEnsure that the area around the power outlet is kept clear at all times 
so you can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Never use a power supply source other than the one rated for the printer in the country where 
you purchased the printer.
AC 100-240 V, 50/60 Hz
Working around the 
printerNever put your hands or fingers in the printer while it is printing.
Do not place any metal objects (paper clips, staples, etc.) or containers of flammable solvents 
(alcohol, thinners, etc.) on top of the printer.
Should any foreign object (metal or liquid) fall into the printer, unplug the power cord and call 
for service.
When installing or transporting this printer, do not incline it, lay it down on its side, or turn it 
upside down. Ink can leak.
Print Head and Ink 
Tan kFor safety reasons, store Print Head and Ink Tank out of the reach of small children.
If a child should ingest any ink, consult a doctor immediately.
Do not shake Print Head and Ink Tank.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after printing.
The metal parts may be very hot and could cause burns.
During printingDo not touch the part around the ejecting paper during printing.
This could cause the printer to malfunction. 
						

							Appendix
92
Regulatory Information
„Color Printer Model: K10260 (DS810)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in 
a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If 
such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
„Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus 
as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the 
Industry Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils 
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, 
NMB-003 édictée par l’Industrie Canada. 
						

							Exif Print
This printer supports Exif Print.
Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting 
to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and 
optimized, yielding extremely high quality prints.
International ENERGY STAR
® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY STAR 
guidelines for efficiency.
The International ENERGY STAR
® Office Equipment Program is a global program that promotes 
energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions that effectively reduce 
energy consumption. It is an open system in which business can participate voluntarily. The targeted products 
are office equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect 
voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are as follows:
AC 100-240 V, 50/60 Hz
Trademark Notices
• “Microsoft” and “Windows” are trademarks of Microsoft Corporation, registered in the United States and 
other countries. 
• “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. 
• “Microdrive” is a trademark of International Business Machines Corporation. 
• “SmartMedia” is a trademark of Toshiba Corporation. 
• “MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory Stick Pro Duo” are trademarks 
of Sony Corporation. 
• “xD-Picture Card” is a trademark of Fuji Photo Film CO., Ltd. 
• “MultiMediaCard” is a trademark of Infineon Technologies AG. 
• “SD card” and “miniSD Card” are trademarks of SD Association. 
• “IrDA Feature Trademark” is owned by the Infrared Data Association and used under license therefrom. 
• “Bluetooth” is a trademark of Bluetooth SIG, Inc., U.S.A and are licensed to Canon Inc. 
Copyright
© 2005 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever without the 
express written permission.
Bluetooth ID: B02165 
						

							Photo Printing Guide
QA7-3584-V02 XXXXXX ©CANON INC.2005 PRINTED IN THAILAND The following ink tank is compatible with this printer.
For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide.
QA7-3584-V02
ENG