Canon printer PIXMA SELPHY DS810 User Manual

							Printing from the Memory Card
29
2Select Photo gallery.
3Select the photo to print.
Notes
Displaying Photos Automatically on the LCD
You can automatically display photos stored in a memory card on the LCD. 
•Press the OK button when viewing photos in the Photo gallery to start the 
slideshow.
•Press the Stop/Reset button when viewing a slideshow to stop the slideshow. 
You can set the picture quality of the slideshow. See “Changing the Other Settings” 
on page 43.
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
(1) Press the Menu button.
(3) Press the OKbutton.
The stored photo is displayed 
on the LCD.
Note
The watch icon may appear when 
importing photos from a memory 
card.
(2) Use the WX buttons to select 
Photo gallery.
(1) Using the WX buttons, select the image to print.
(2) Press the Print button.
The print confirmation screen is displayed. 
						

							Printing from the Memory Card
30
4Confirm the settings.
(2) Confirm the Page size,Media type and Print quality.
To change any of the settings, press the Settings button on the operation panel.
See “To Change Print Setting” on page 24.
5Start printing.
(1) Ensure that the paper is loaded in the print confirmation screen.
„Specifying How Many Copies to Print for Each Photograph—
Photo Print
You can specify the number of copies to print for each photo.
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select Photo print.
(1) Press the Menu button.
(2) Use the WX buttons to select Photo print and press the OK button.
Photos stored in the memory card are displayed.
(1) Press the ST buttons to 
specify the number of copies 
to print.
The number of copies
(2) Press the Print button. 
						

							Printing from the Memory Card
31
3Specify the number of copies to print.
(1) Use the WX buttons, select the photo you want to print.
(3) Repeat steps (1) and (2) and specify the number of copies for each photo you want 
to print.
(4) Press the OK button.
The print confirmation screen is displayed.
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
4Start printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the Settings button.
See “To Change Print Setting” on page 24.
(2) Press the Print button.
The specified number of copies for each image will be printed.
(2) Use the ST buttons to specify the number of 
copies to print. 
						

							Printing from the Memory Card
32
Other Useful Functions
You can print your favorite photo as a postcard or sticker using the following 
features.
• “Searching for Photos with the Shooting Date— Search” on page 32
• “Printing a Specified Area—Trimming” on page 34
• “Printing Multiple Photos on One Sheet of Media—Layout Print” on page 35
• “Printing Stickers from a Photo—Sticker Print” on page 37
• “Printing with Adjusted Color Balance—Color Balance” on page 38
• “Other Print Functions” on page 41
„Searching for Photos with the Shooting Date— Search
When there are many photos stored on the memory card, you can select photos to 
display or print by specifying the shooting date with the search function.
Notes
• You can use the search function to specify a date or date range from the Photo 
gallery,Photo print,Layout print,Sticker print or Color balance menus to display or 
print only photos that match the dates you set.
• If you have specified the number of copies to print for photos or pasted photos to 
specify the layout before using the search function, the photos will be printed even 
if they are excluded by the search.
• You can use the Print all photos and Photo Index print menus to print photos from 
the date or date range you set.
1Set the search method.
(1) Press the Search button on the operation 
panel.
TheSearch screen is displayed.
(2) Use the ST buttons to select a search 
method, then press the OK button.
One date only
Sets the search date to one specific day.
Select date range
Specifies a range of dates to search.
Note
There may be a delay before the Search screen is 
displayed, depending on the number of photos 
stored in the memory card. 
						

							Printing from the Memory Card
33
2Specify a date range.
•If you select One date only
•If you select Select date range
Notes
• The date that you specified is displayed in the format that you set at the Date 
display setting. See “Date display” on page 43.
• To cancel the search mode, follow the procedure below.
1Press the Search button.
TheSearch screen is displayed.
2 Select Cancel search, and press the OK button.
The search mode is canceled and all the photos in the memory card can be 
displayed and printed.
Removing the memory card also cancel the search mode.
(1) Use the WX buttons to select the shooting 
date to search and then press the OK button.
You can display the photos that are shot within 
the specified date.
(1) Use the WX buttons to select the earliest 
shooting date to search and then press the OK
button.
(2) Use the WX buttons to select the latest 
shooting date to search and then press the OK
button.
You can display the photos that are shot within 
the specified range of date. 
						

							Printing from the Memory Card
34
„Printing a Specified Area—Trimming
You can print a specified area of the photo displayed on the LCD.
Note
Please trim the photo after specifying Page size,Media type, and Borderless/Bordered
on each settings screen. If you change the settings after trimming the photo, the 
trimmed selection will be lost.
1Select the photo to trim.
Use the WX buttons to select the photo.
2Set the Trimming Mode.
3Trim the sections you want to print.
•Trimming button: you can rotate the trimming area.
•
STW X buttons: you can move the trimming area.
•  buttons: you can enlarge or reduce the trimming area.
4Finalize the trimmed area.
(1) Press the OK button.
The trimming area is fixed and the original photo is displayed.
Notes
• Trimming limits are displayed on photographs that have been trimmed.
• Once the trimmed area is finalized, if you press the Trimming button again, you can 
modify the trimmed area.
• If you want to cancel the trimming mode, press the Trimming button and then press 
the Stop/Reset button in the Trimming screen. Removing the memory card also 
cancels the trimming mode.
• You cannot save the trimmed image to a memory card.
Press the Trimming button on the operation 
panel.
The printer is now in Trimming Mode. 
						

							Printing from the Memory Card
35
„Printing Multiple Photos on One Sheet of Media—Layout Print
You can print the specified photo in the specified layout (Borderless or 
Bordered ×2/×4/×8/Half, borderless/Half, bordered/Half, borderless (w/
lines)/Half, bordered (w/lines)/Album (4/right)/Album (4/left)).
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select Layout print.
(1) Press the Menu button.
(2) Use the WX buttons to select Print studio and then press the OK button.
The Print studio menu is displayed.
(3) Use the WX buttons to select Layout print and then press the OK button.
The screen for specifying the layout is displayed.
3Specify the layout.
Borderless
Bordered
×2 ×4 Half×8
Half
(w/lines)
(1) Use the WX buttons to select the layout.
(2) Press the OK button.
The screen for specifying the paste method is 
displayed. 
						

							Printing from the Memory Card
36
4Select the paste method.
(1) Use the ST buttons to select the paste method and then press the OK button.
Paste all
All the photos in the memory card are pasted automatically in the selected layout.
Print confirmation screen is displayed. Proceed to step 6.
Paste one by one
Paste photos one by one on the specified layout. Proceed to step 5.
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
5Paste photos one by one.
(2) Press the OK button.
The photo is pasted on the layout.
(3) Repeat steps (1) and (2) for each photo you want to print.
Press the Back button to cancel pasting the specified photo.
Press the Stop/Reset button to clear all photos pasted in the selected layout.
(4) Press the Print button.
The print confirmation screen is displayed.
Note
You cannot paste photos on more than one page. Start printing once you have pasted 
photos on one page.
6Start printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the Settings button.
See “To Change Print Setting” on page 24.
(2) Use the ST buttons to specify the number of copies to print.
(3) Press the Print button.
Printing the photos pasted on the specified layout is started.
(1) Use the WX buttons to display the photo you 
want to paste. 
						

							Printing from the Memory Card
37
„Printing Stickers from a Photo—Sticker Print
You can print your favorite photo on the Canon Photo Stickers.
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select Sticker print.
(1) Press the Menu button.
(2) Use the WX buttons to select Print studio from the menu screen and then press 
theOK button.
The Print studio menu is displayed.
(3) Use the WX buttons to select Sticker print and then press the OK button.
The screen for specifying the layout is displayed.
3Specify the layout.
(1) Use the WX buttons to specify the layout.
(2) Press the OK button.
The photo selection screen is displayed.
4Select the photo to print.
(1) Use the WX buttons to select the photo you want to print.
(2) Press the OK button.
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
Stickers ×16 
						

							Printing from the Memory Card
38
5Select a frame.
Notes
• To print without a frame, press the OK button without pressing anything else.
• If the photo is upside-down, you can use the ST buttons to rotate the photo 180 
degrees and adjust the frame up or down for printing.
• If you want to rotate a photo 90 degrees to match a frame, adjust the size of the 
trimming area. See “Printing a Specified Area—Trimming” on page 34.
(2) Press the OK button.
The print confirmation screen is displayed.
6Start printing.
(1) Confirm the Page size.
(2) Use the ST buttons to specify the number of copies to print.
(3) Press the Print button.
Specified photo will be printed on the photo stickers.
When printing stickers, be sure to load the media so that it faces in the correct 
direction. See “Loading the Print Media” on page 21.
„Printing with Adjusted Color Balance—Color Balance
This function allows you to print a sample of a photo in 9 different hues on a 
single sheet of paper. You can then select the hue you like from the sample 
and print a final copy.
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select Color balance.
(1) Press the Menu button.
(2) Use the WX buttons to select Print studio, and press the OK button.
The Print studio menu is displayed.
(3) Use the WX buttons to select Color balance, and press the OK button.
The photo selection screen is displayed.
(1) Use the WX buttons to select a frame.