Canon printer PIXMA SELPHY DS810 User Manual

Photo Printing Guide
QA7-3584-V02 XXXXXX ©CANON INC.2005 PRINTED IN THAILAND The following ink tank is compatible with this printer.
For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide.
QA7-3584-V02
ENG 

Exif Print
This printer supports Exif Print.
Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting 
to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and 
optimized, yielding extremely high quality prints.
International ENERGY STAR
® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY STAR 
guidelines for efficiency.
The International ENERGY STAR
® Office...

1
Contents
Easy Setup Instructions .................................................................................. 3
Unpack the Printer ........................................................................................................ 3
Preparing the Printer..................................................................................................... 4
Installing the Print Head................................................................................................ 5
Installing an...

2
Introduction
This Photo Printing Guide uses the following symbols to indicate important information. Always 
observe the instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury 
caused by incorrect operation of the equipment. These must be observed for 
safe operation.
Instructions that, if ignored, could result in personal injury or material damage 
caused by incorrect operation of the equipment. These must be observed for 
safe...

Easy Setup Instructions
3
Easy Setup Instructions
Unpack the Printer
Check that all the following items are in the box. If anything is missing or is 
damaged, contact a Canon service representative.
Documentation and Setup Software & 
User’s Guide CD-ROM
Print HeadPower Cord
Ink Tank 
BCI-16 Color
Printer 

Easy Setup Instructions
4
Preparing the Printer
1Place the printer on a flat surface.
2Plug the power cord into the back of the printer and connect the other 
end to a power outlet.
• Never attempt to plug the Power Cord into the power outlet or unplug the Power 
Cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not 
place heavy objects on the power cord.
• Never use any power supply other than the standard power supply available in the...

Easy Setup Instructions
5
4Select the display language.
(1) Press the ST buttons to select the language you want to display on the LCD.
(2) Press the OK button.
Note
If you accidentally changed the languages, see “Language selection” on page 44 to 
select your language.
Installing the Print Head
1Slide the Cover Open Switch 
toward the right to open the Cover.
The Print Head Holder moves to the 
center.
2Press the Lock button, then raise 
the Lock Lever.
Do not touch internal parts other than 
the Lock...

Easy Setup Instructions
6
3Take the Print Head from its 
package and remove the protective 
cap.
Dispose of the protective cap.
There might be some transparent or light 
blue ink on the inside of the bag the Print 
Head comes in, or the inside of the 
protective cap this has no effect on print 
quality. Be careful not to get ink on yourself 
when handling these items. 
Notes
• Do not touch the Print Head Nozzles.
• Do not attempt to reattach the 
protective cap once it has been  Print Head Nozzles...

Easy Setup Instructions
7
Installing an Ink Tank
• For safety reasons, store an Ink Tank out of the reach of small children.
• Do not drop or shake an Ink Tank as this may cause the ink to leak out and stain your 
clothes and hands.
1Unpack a new Ink Tank and remove 
the orange protective cap.
Dispose of the protective cap.
Notes
• Do not touch the ink port.
• Do not attempt to reattach the protective 
cap once it has been removed.
Ink ports
2Insert the Ink Tank slant into the 
slot aligning the 
X mark...

Printer Parts and Their Functions
8
Printer Parts and Their Functions
This section describes the components of the printer.
Printer
Cover
Open to replace the Ink Tank 
or remove jammed paper.
„Front View
Paper Support
Open and pull out 
before printing to 
support paper. Paper Guide
When loading 
paper, ensure 
that the left edge 
just touches this 
guide.
Paper Output Tray
The printed paper 
will be ejected.Card Slot
Set the memory 
card from a 
digital camera 
here. For 
instructions, 
see “Using a...