Canon printer PIXMA SELPHY DS810 User Manual

Printing from the Memory Card
39
3Select a photo to print.
(1) Use the WX buttons to display the photo you want to print.
(2) Press the OK button.
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
4Print a sample.
If you have already printed a sample or you want to omit this procedure, select 
No to skip to the step 5.
(1) Use the ST buttons to...

Printing from the Memory Card
40
Note
Depending on the paper you use, you may need to wait for a few minutes to let the 
colors settle. Wait until the colors of the sample photo settle, then select the number of 
the hue that you like.
6Start printing.
(1) Confirm your print settings.
Press the Settings button to change print settings if necessary. See “To Change 
Print Setting” on page 24.
(2) Use the ST buttons to set the number of copies you want to print.
(3) Press the Print button.
The photo will be...

Printing from the Memory Card
41
„Other Print Functions
Print studio also contains the following print menus.
• Print all photos
You can print all photos saved on a memory card.
• Photo Index print
You can print a list of all photos saved in the memory card.
•DPOF print
If DPOF (Digital Print Order Format) settings are made on the camera, 
photos are printed automatically according to those settings.
1Prepare to print.
See “Preparation When Using the Printer” on page 16.
2Select a print menu.
(1) Press...

Printing from the Memory Card
42
Note
You can do...
• You can zoom in/out on the photo on the LCD using the   buttons.
• See “Searching for Photos with the Shooting Date— Search” on page 32.
• See “Printing a Specified Area—Trimming” on page 34.
3Start printing.
(1) Confirm your settings.
To change any of the settings, press the Settings button.
See “To Change Print Setting” on page 24.
(2) Use the ST buttons to set the number of copies you want to print.
You cannot select print quantities for DPOF...

Printing from the Memory Card
43
Changing the Other Settings
This section explains the setting menu in the Device settings.
1Turn on the printer.
2Press the Menu button.
3Use the WX buttons to select Tool box and then press the OK button.
4Use the WX buttons to select Device settings and then press the OK
button.
For the rest of the procedures, see each setting menu.
Date display
You can change the format for printing the date.
(1) Use the ST buttons to select Other settings and then press the OK...

Printing from the Memory Card
44
Language selection
You can change the language displayed on the LCD.
(1) Use the ST buttons to select Language selection and then press the OK button.
(2) Use the ST buttons to select a language and then press the OK button.
Reset setting
You can reset all settings, other than the display language and the Print Head 
position, to the initial state.
(1) Use the ST buttons to select Reset setting and then press the OK button.
(2) Use the ST buttons to select Ye s and then...

Printing Photographs Directly from a Digital Camera
45
Printing Photographs Directly from a 
Digital Camera
Printing Photographs Directly from a PictBridge 
Compliant Device
Connecting a PictBridge compliant device such as digital camera, camcorder or 
mobile phone to the printer allows you to print recorded images directly without 
using a computer.
Notes
• PictBridge is an Industry standard enabling a range of digital photo solutions, 
including the direct printing of photos from a digital still...

Printing Photographs Directly from a Digital Camera
46
3Load the 101.6×152.4mm/4"×6" paper into the Paper Support in the 
portrait position (feed from the short side) with the print side facing up.
4Connect the PictBridge compliant device to the printer.
Note
Depending on the model or brand of your device, you may have to select a mode of 
printing photos compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting...

Printing Photographs Directly from a Digital Camera
47
„Confirming or Changing the Device Settings
To change the paper size or paper type, operate the device to select the 
PictBridge print setup mode and confirm or change the settings.
The settings below can be changed by pressing the S
Settings button when the 
device is connected. However, changes can be made on the Settings screen 
only when the corresponding items below are in D
Default (selections based on 
the printer setting) using the controls...

Printing Photographs Directly from a Digital Camera
48
Photo Paper Plus Glossy. The following sizes and types of paper can be loaded 
in the printer by selecting options from P
Paper size and PPaper type.
* Sticker media manufactured by Canon. Set Paper size to 10
×15cm/4"×6"
when printing stickers.
„About “Layout” and “Trimming”
For LLayout, when you have selected DDefault (selections based on the printer 
setting), the printer operates based on the Settings screen.
Note
When printing onto Photo...