Canon printer PIXMA SELPHY DS810 User Manual

Troubleshooting
79
Note
When the color is different from what is displayed on the LCD or when it is not printed 
with your favorite color
You can adjust the brightness, contrast, and color balance of photos for printing from 
the Settings screen. See “To Change Print Setting” on page 24.
Printed Surface is Scratched or Ink Blots
Possible CauseTr y This
There are ink blots on 
the printed surfaceClean the Paper Feed Roller.
See “Paper Does Not Feed Properly/Paper Jam” on page 77.
There are ink blots on...

Troubleshooting
80
Note
Sets time to dry ink on the printing surface.
In case the ink is still wet and the print surface becomes dirty, set longer time to dry 
ink.
1Press the Menu button.
2 Select To o l  b o x and then press the OK button.
3 Select Device settings and then press the OK button.
4 Select Print settings and then press the OK button.
5 Select Ink drying wait time and then press the OK button.
6 Select Standard, Long or Longer and then press the OK button. Curled paper used If all four...

Troubleshooting
81
Cannot Print Properly from the Digital Camera
The following are the possible errors that may occur when printing directly from a 
digital still camera or digital video camcorder*, and the countermeasures to 
eliminate them.
* Hereafter, the digital still camera and digital video camcorder are collectively 
called a digital camera or camera.
Notes
• PictBridge or Canon Bubble Jet Direct compatible digital cameras can be connected 
to your printer for direct printing.
• This section...

Troubleshooting
82
*1To resume printing, you can press the OK button on the printer instead of selecting 
Continue.
*
2The waste ink absorber absorbs ink used during cleaning, for example. If this message 
appears, you will need to call for servicing to replace the absorber and to check the printer 
for proper operation.
Camera Error MessageTr y This
Printer in use/Printer 
warming up• Images are being printed from the computer.
Wait until printing ends. The printer automatically starts printing 
the...

Troubleshooting
83
Cannot Install the Printer Driver
Possible CauseTr y This
Unable to proceed 
beyond the Printer Port 
ScreenReinstall the printer driver.
1. Click Cancel.
2. Click Start Over on the Installation Failure screen.
3. Click Back on the displayed screen. 
4. Click Exit on the SELPHY DS810 screen, then remove the CD-
ROM.
5. Turn the printer off.
6. Restart the computer.
7. Carefully follow the procedures described and reinstall the driver. See “Installing the Printer Driver” on page 58....

Troubleshooting
84
Cannot Print Properly through Wireless Communication
Note
This printer cannot print data from a PC via Bluetooth communication.
Possible CauseTr y This
The infrared 
communication distance 
or the Infrared Port angle 
is incorrectPlace the printer at a distance of 7.9 inch/20 cm from the mobile 
phone or the PDA.
Ensure that the Infrared Ports are at a proper angle and there are 
no obstacles between them. Retry printing.
The allowable distance and angle for infrared communication...

Appendix
85
Appendix
For the Optional Bluetooth Unit Users
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that 
you use your product safely. Do not attempt to use the product in any way not 
described in this manual.
You may cause an electric shock/fire or damage the printer if you ignore any of these 
safety precautions.
You may cause injury or damage the printer if you ignore any of these safety 
precautions.
This product emits low level magnetic flux....

Appendix
86
Specifications
Communication method Bluetooth standard Ver 1.2
Output Power Class2
Communication distance Line-of-sight distance: approx. 10 meters*
* It may vary depending on factors including the presence of 
obstacles between communication equipment, radio wave 
conditions, the presence of magnetic fields around 
microwave ovens and locations where electrostatic and radio 
interference occur, and receiver sensitivity and antenna 
performance of communication equipment.
Profile OPP (Object...

Appendix
87
Specifications
Printer
Printing resolution (dpi): 4800 (horizontal)*×1200 (vertical)
* Ink droplets can be placed with a horizontal pitch of 1/4800 inch at 
minimum. Supported only when printing with a computer. Resolution 
may vary based on printer driver setting.
Print speed Photo Printing Standard (PictBridge) PP-101 4"×6" borderless Approx. 
63 seconds*
* When printing a 5 megapixel image taken by certain Canon digital 
camera from PictBridge on default settings using Photo Paper...

Appendix
88
Camera Direct Print 
„Canon Bubble Jet Direct
Interface: Direct Print Port
(Connect a DS810-compatible digital camera or digital video camcorder 
using the USB cable supplied with the camera.)
Compatible digital cameras 
and digital video camcorders:DS810-compatible digital cameras and digital video camcorders
Compatible Paper: Card #1 (Photo Paper Pro 4"×6" /101.6×152.4 mm), Card #2 (Photo 
Paper Plus Glossy, Photo Paper Plus Semi-gloss or Glossy Photo Paper 
4"×6"...