Canon printer PIXMA MG7520 User Manual
Have a look at the manual Canon printer PIXMA MG7520 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Printing from a Digital Camera Printing Photographs Directly from a PictBridge (Wireless LAN) Compliant Device About PictBridge (Wireless LAN) Print Settings 561
Printing Photographs Directly from a PictBridge (Wireless LAN) Compliant Device You can connect a PictBridge (Wireless LAN) compliant device such as a digital camera, camcorder, or mobile phone to the machine through LAN, and print recorded images directly without using a computer. Connectable devices: PictBridge (Wireless LAN) compliant device Printable image data format: The machine accepts images* taken with a camera compliant with the Design rule for Camera File system and PNG files. * Exif 2.2/2.21/2.3 compliant Important • LAN connection with the machine is required to use this function. Note • PictBridge is the Standard to print your photos directly without using a computer, connecting a device such as a digital still camera, digital camcorder, or camera-equipped mobile phone. In this manual, PictBridge printing with the wireless LAN connection is referred to as "PictBridge (Wireless LAN)." • When printing photos with the PictBridge (Wireless LAN) compliant device connected to the machine, we recommend the use of the AC adapter supplied with the device. If you are using the device battery, be sure to charge it fully. • Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge (Wireless LAN) before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the machine. Perform necessary operations on the PictBridge (Wireless LAN) compliant device before connecting it to this machine according to instructions given in the device's instruction manual. • Depending on your PictBridge (Wireless LAN) compliant device, you can print on the label side of discs. However, you cannot print on 3.15 inches / 8 cm printable discs. 1. Make sure that the machine is turned on. 2. Load paper. 3. Connect the PictBridge (Wireless LAN) compliant device to the machine. Detect the machine with the PictBridge (Wireless LAN) compliant device and connect the PictBridge (Wireless LAN) compliant device to the machine with LAN. Note • For details on how to detect the machine, refer to your PictBridge (Wireless LAN) compliant device's instruction manual. 562
4.Specify the print settings such as the paper type and layout. You can perform settings using the menu on the LCD of your PictBridge (Wireless LAN) compliant device. Select the size and type of paper that you loaded in the machine. Settings on a PictBridge (Wireless LAN) Compliant Device If your PictBridge (Wireless LAN) compliant device does not have a setting menu, change the setting from the machine. Settings on the Machine Note • When printing from the PictBridge (Wireless LAN) compliant device, set the print quality with theoperation panel on the machine. You cannot set the print quality on the PictBridge (Wireless LAN) compliant device. • When printing onto printable disc, attach the disc tray following the on-screen instructions of PictBridge (Wireless LAN) compliant device. For details on how to place the printable disc on the disc tray: Placing a Printable Disc 5. Start printing from your PictBridge (Wireless LAN) compliant device. 563
About PictBridge (Wireless LAN) Print Settings Settings on a PictBridge (Wireless LAN) Compliant Device Settings on the MachineSettings on a PictBridge (Wireless LAN) Compliant DeviceThis section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction manual. Note • In the following description, names of setting items are given according to those used in Canon-brand PictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on the brand or model of your device. • Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge (Wireless LAN) compliant device, the machine settings for these items are applied. PictBridge print settings • Depending on the PictBridge (Wireless LAN) compliant device, you can print a photo onto the disc label of the printable disc. The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device. Paper size4" x 6"/ 10 x 15 cm, 5" x 7"*, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter) * Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (Maynot be selected depending on the device.)Paper type•Default (Selections based on the machine setting)• Photo: Photo Paper Plus Glossy II PP-201/Photo Stickers* * When printing on sticker paper, select 4"x6"/10x15cm in Paper size . Do not set Layout to Borderless . • Fast Photo: Photo Paper Pro Platinum PT-101 • Plain: A4/Letter sized plain paper When Paper type is set to Plain, borderless printing will be disabled even when Layout is set to Borderless . LayoutDefault (Selections based on the machine setting), Index, Bordered, Borderless, N-up (2, 4, 9, 16)*1, 20-up*2, 35-up*3 *1 Layout compatible with A4 or Letter-sized paper and Canon-brand sticker above. -A4/Letter: 4-up -Photo Stickers: 2-up, 4-up, 9-up, 16-up. *2 With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specified 564
data (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.) *3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand PictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brandPictBridge (Wireless LAN) compliant devices.)Print date & file no.Default (Off: No printing), Date, File No., Both, OffImage optimizeDefault (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2 *1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print. *2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (Maynot be selected depending on the device.)TrimmingDefault (Off: No trimming), On (follow the camera's setting), Off Settings on the Machine You can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print according to the settings on the machine. This section describes the procedure to display the PictBridge print settings screen. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap PictBridge print settings . 5. Check the message that is displayed, then tap OK. 6. Tap Photo print setting . The PictBridge print settings screen is displayed. For details on the setting items: PictBridge print settings Note • If you select Disc label print setting , the Set disc print area screen is displayed to change the disc label print setting. 565
Paper setting for PrintingBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.• When you load paper in the cassette: The screen to register the cassette paper information is displayed. Register the paper size and the media type according to the loaded paper. Important • For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen: Setting the Media Type with the Printer Driver and on the Printer Setting the Paper Size with the Printer Driver and on the Printer • For copying, specify the paper settings for copying so that they match the cassette paper information. Note • Depending on the registered cassette paper information, the screen to confirm if you apply theregistered information to the paper settings for copying is displayed. If you tap Yes, the information is applied to the paper settings for copying. • When the paper settings for printing or copying are different from the cassette paper information registered to the machine: Ex: ◦ Paper setting for printing or copying: B5 ◦ Cassette paper information registered to the machine: A4 567
When you start printing or copying, a message is displayed. Confirm the message, then tap OK. When the screen to select the operation is displayed, select one of the operations below. Note • Depending on the setting, the choices below may not be displayed. Print with paper in cass. settings Select if you want to print on the paper loaded in the cassette without changing the paper settings. For example, when the paper setting for printing or copying is B5 and the cassette paper information registered to the machine is A4, the machine starts printing or copying with B5 on the paper loaded in the cassette. Replace the paper and print Select if you want to print after replacing the paper of the cassette. For example, when the paper setting for printing or copying is B5 and the cassette paper information registered to the machine is A4, you load B5 sized paper in the cassette before you start printing or copying. The cassette paper information registration screen is displayed after replacing the paper and inserting the cassette. Register the cassette paper information according to the paper you loaded in the cassette. Note • If you do not know what paper information to register to the machine, touch the Back button when the screen to select the operation is displayed. When the previous screen is displayed, confirm the paper size and the media type, then register them to the machine. • For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen: 568
Setting the Media Type with the Printer Driver and on the Printer Setting the Paper Size with the Printer Driver and on the Printer Cancel Cancels printing. Select when you change the paper settings specified for printing or copying. Change the paper settings, then try printing again. Important • About the default setting for displaying the message which prevents misprinting: The default setting is different between when you print or copy from the operation panel of the machine and when you print using the printer driver. • When you print or copy from the operation panel of the machine, the message which prevents misprinting is enabled by default. To change the setting for printing or copying using the operation panel of the machine: Cassette settings • When you print using the printer driver, the message which prevents misprinting is disabled by default. To change the setting for printing using the printer driver: Changing the Printer Operation Mode • When the message which prevents misprinting is disabled: The machine starts printing or copying even though the paper settings for printing or copying and the cassette paper information registered to the machine are different. 569
Copying Making Copies Basic Reducing or Enlarging a CopyTwo-Sided Copying About Special Copy MenuCopying Two Pages to Fit onto a SinglePage Copying Four Pages to Fit onto a Single Page 570