Canon printer PIXMA MG7520 User Manual
Have a look at the manual Canon printer PIXMA MG7520 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Inserting the Memory Card Important • When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is flashing, the machine is accessing the memory card. In this case, do not touch the area around the card slot. Note • When Read/write attribute is set to Writable from USB PC or Writable from LAN PC , you cannot print image data from the memory card using the operation panel of the machine. After using the card slot as the memory card drive of a computer, remove the memory card, select Device user settings in Device settings , then set Read/write attribute to Not writable from PC . Setting Up the Card Slot as the Memory Card Drive of the Computer • When you use a computer to edit or enhance photos saved on a memory card, be sure to print them from the computer. If you use the operation panel, the photos may not be printed properly. 1. Prepare your memory card. Attach a special card adapter if your memory card requires one. Before Inserting the Memory Card 2. Turn on the power, then, holding both sides of the paper output tray, gently open it. 3. Insert only one memory card into the card slot. The location to insert a memory card varies depending on each type of memory card. Insert your memory card straightforward WITH THE LABELED SIDE FACING TO THE LEFT into the card slot, according to the insert location in the figure below. When the memory card is inserted properly, the Access lamp (A) will light up. Be sure to attach the card adapter for memory card with the mark (asterisk), and then insert it into the card slot as shown below. Insert the following types of memory cards into the upper card slot: • Memory Stick Duo, Memory Stick PRO Duo • Memory Stick Micro (with the Duo size adapter) 201
Insert the following types of memory cards into the lower card slot: • SD Secure Digital memory card, SDHC memory card • miniSD Card, miniSDHC Card • microSD Card, microSDHC Card Important • Part of the memory card will protrude from the card slot, but do not force it into the slot any further.This can damage the machine or the memory card. • Make sure that the memory card is correctly oriented before inserting it into the card slot. If you force the memory card into the card slot in the wrong orientation, the memory card or the machine can be damaged. • Do not insert more than one memory card at a time. 4. Close the paper output tray. 202
Removing the Memory Card Important • If you used the card slot as the memory card drive of a computer, you must perform the "safe removal"operation on your computer before physically removing the memory card from the machine. Setting Up the Card Slot as the Memory Card Drive of the Computer 1. Holding both sides of the paper output tray, gently open it. 2. Make sure that the Access lamp is lit, and remove the memory card. Hold the part of the memory card that is protruding and remove it straightforward from the machine. Important • Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes while the machine is reading or writing data from/to the memory card. If you remove the memory card or turn off the power while the Access lamp is flashing, the data saved on the memory card can be damaged. 3. Close the paper output tray. 203
Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status 204
Replacing an Ink TankWhen remaining ink cautions or errors occur, the message will appear on the touch screen to inform you ofthe error. Take appropriate action according to the message. A Message Is Displayed Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure . Replacing Procedure When you need to replace an ink tank, follow the procedure below. Important • If you remove an ink tank, replace it immediately. Do not leave the machine with the ink tank removed. • Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the ink tank properly. • Once an ink tank has been installed, do not remove it from the machine and leave it out in the open. This will cause the ink tank to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use. Note • Color ink may be consumed even when printing a black-and-white document or when black-and- white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine. When an ink tank is out of ink, replace it immediately with a new one. Useful Information about Ink 1. Make sure that the power is turned on, then, holding both sides of the paper output tray, gently open it. 2. Lift the operation panel and open until it stops. The print head holder moves to the replacement position. 205
Caution• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holderuntil it stops completely. Important • When opening or closing the operation panel, do not touch the buttons and touch screen on the operation panel. Doing so may result in an unexpected operation. • Do not touch the metallic parts or other parts inside the machine. • If the operation panel is left open for more than 10 minutes, the print head holder moves to the right. In this case, close and reopen the operation panel. 3. Remove the ink tank with the lamp flashing fast. Push the tab (A) and lift the ink tank to remove. Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables. Note • Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks. • For details on ink lamp flashing speed, see Checking the Ink Status with the Ink Lamps . 4. Prepare a new ink tank. 1. Take a new ink tank out of its package, remove the orange tape () completely, then remove the protective film ( ) completely. 206
Important • Handle an ink tank carefully. Do not drop or apply excessive pressure to it. • If the orange tape remains on the Y-shape air hole (B), ink may splash or the machine may not print properly. 2. Hold the ink tank with the orange protective cap (C) pointing up while being careful not to block the Y-shape air hole (B). 3. Lift up the tab on the orange protective cap (C) to remove it off GENTLY. 207
Important • Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air hole (B) blocked, ink may splash. • Do not touch the inside of the orange protective cap (C) or the open ink port (D). The ink may stain your hands if you touch them. • Do not reattach the protective cap (C) once you have removed it. Discard it according to the local laws and regulations regarding disposal of consumables. 5. Install the new ink tank. 1. Insert the front end of the ink tank into the print head at a slant. Make sure that the position of the ink tank matches the label. 2. Press on the top of the ink tank until the ink tank snaps firmly into place. Make sure that the ink lamp lights up. Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder. • You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 208
6.Close the operation panel gently. Caution • When closing the operation panel, be careful not to get your fingers caught. Important • When opening or closing the operation panel, do not touch the buttons and touch screen on the operation panel. Doing so may result in an unexpected operation. Note • If the error message appears after the operation panel is closed, take appropriate action. A Message Is Displayed • When you start printing after replacing the ink tank, the machine starts cleaning the print head automatically. Do not perform any other operations until the machine completes the cleaning of the print head. • If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, align the print head . • The machine may make noise during operation. 209
Checking the Ink Status Checking the Ink Status with the Touch Screen on the Machine Checking the Ink Status with the Ink Lamps You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 210