Canon printer PIXMA MG7520 User Manual
Have a look at the manual Canon printer PIXMA MG7520 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Be Sure to Set Cassette Paper Information after Loading PaperWhen you insert a cassette into the machine after loading paper, the screen for setting the type and size of paper is displayed. Set the cassette paper information according to the type and size of loaded paper. To prevent incorrect printing, this machine has a function that detects whether the information set for the paper loaded in the cassette matches the paper settings. Before printing, make paper settings in accordance with the cassette paper information. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing. When this error message is displayed, check and correct the paper settings. To check cassette paper information, display the paper information screen on the operation panel.371
Canceling a Print JobNever touch the ON button! If you touch the ON button while printing is in progress, the print data sent from the computer queues in the machine and you may not be able to continue to print. Touch the Stop button to cancel printing.372
Key to Enjoying Consistent Printing QualityThe key to printing with the optimal printing quality is to prevent the print head from drying or clogging.Always observe the following rules for optimal printing quality. Never unplug the power cord until the power is turned off!If you touch the ON button to turn off the power, the machine caps the print head (nozzles) automatically to prevent from drying. If you unplug the power cord from the wall outlet before the POWER lamp is turned off, the print head will not be capped properly and this will cause drying or clogging. When unplugging the power cord , make sure that the POWER lamp is not lit. Print periodically! Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time, even if it is capped, the print head too, may become dried or clogged if the machine has not been used for a long time. We recommend you to use the machine at least once a month. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint-stick, or bleed if water or sweat comes in contact with the printed area. 373
Precautions for Safe Transport of the MachineWhen relocating the machine, make sure of the following. Important • Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficientprotective material to ensure safe transport. • With the print head and ink tank left installed in the machine, touch the ON button to turn off the power. This allows the machine to automatically cap the print head, thus preventing it from drying. • After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so may cause the ink to leak during transport and cause damage to the machine. • When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE". 1. Turn the machine off. 2. Confirm that the POWER lamp is off and unplug the power cord . Important • Do not unplug the machine while the POWER lamp is lit or flashing, as it may cause malfunction or damage to the machine, making the machine unable to print. 3. Retract the paper output support, then close the paper output tray gently. The output tray extension is retracted automatically when the paper output tray is closed. 4. Unplug the printer cable from the computer and from the machine, then unplug the power cord from the machine. 5. Use adhesive tape to secure all the covers on the machine to keep them from opening during transportation. Then pack the machine in the plastic bag. 6. Attach the protective material to the machine when packing the machine in the box. Important • We recommend to hold and carry out this machine as shown in the figure below. If you hold the cassette, it may fall out of the machine. 374
Legal Limitations on Use of Your Product and Use of ImagesIt may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.• Paper money • Money orders • Certificates of deposit • Postage stamps (canceled or uncanceled) • Identifying badges or insignias • Selective service or draft papers • Checks or drafts issued by governmental agencies • Motor vehicle licenses and certificates of title • Traveler's checks • Food stamps • Passports • Immigration papers • Internal revenue stamps (canceled or uncanceled) • Bonds or other certificates of indebtedness • Stock certificates • Copyrighted works/works of art without permission of copyright owner 376
SpecificationsGeneral SpecificationsPrinting resolution (dpi)9600* (horizontal) x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum.InterfaceUSB Port: Hi-Speed USB *1 LAN Port: Wired LAN: 100BASE-TX / 10BASE-T Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2 *1 A computer that complies with Hi-Speed USB standard is required. Sincethe Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1. *2 Setup possible through Standard setup, WPS (Wi-Fi Protected Setup), WCN (Windows Connect Now) or Cableless setup. USB and LAN can be used at the same time. Wireless LAN and wired LAN cannot be used at the same time.Print width8 inches/203.2 mm (for Borderless Printing: 8.5 inches/216 mm)Operating environmentTemperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions. Recommended conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (no condensation) * For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.Storage environmentTemperature: 32 to 104 °F (0 to 40 °C) Humidity: 5 to 95 % RH (no condensation)Power supplyAC 100-240 V, 50/60 HzPower consumptionPrinting (Copy): Approx. 17 W Standby (minimum): Approx. 1.0 W *1*2 OFF: Approx. 0.2 W *1 *1 USB connection to PC *2 The wait time for standby cannot be changed.External dimensionsApprox. 17.2 (W) x 14.6 (D) x 5.9 (H) inches Approx. 435 (W) x 370 (D) x 148 (H) mm * With the Paper Output Tray retracted.WeightApprox. 17.4 lb (Approx. 7.9 kg) 377
* With the Print Head and ink tanks installed.Print Head/InkTotal 6656 nozzles (PgBK 1024 nozzles, Y/DyeBK each 512 nozzles, C/M/GYeach 1536 nozzles) Copy Specifications Multiple copymax. 99 pagesIntensity adjustment9 positions, Auto intensity (AE copy)Reduction / Enlargement25 % - 400 % (1 % unit) Scan Specifications Scanner driverWindows: TWAIN 1.9 Specification, WIA Mac OS: ICAMaximum scanning sizeA4/Letter, 8.5" x 11.7"/216 x 297 mmScanning resolutionOptical resolution (horizontal x vertical) max: 2400 x 4800 dpi *1 Interpolated resolution max: 19200 x 19200 dpi *2 *1 Optical Resolution represents the maximum sampling rate based on ISO 14473. *2 Increasing the scanning resolution will limit the maximum possible scanning area.Gradation (Input / Output)Gray: 16 bit/8 bit Color: 48 bit/24 bit (RGB each 16 bit/8 bit) Network Specifications Communication protocolTCP/IPWired LANSupported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transfer speed: 10 M/100 Mbps (auto switching)Wireless LANSupported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region. Communication distance: Indoors 164 feet/50 m * Effective range varies depending on the installation environment and location. Security: WEP (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) Setup: 378
Standard setup WPS (Push button configuration/PIN code method) WCN (WCN-NET) Cableless setup Other Features: Administration password Minimum System Requirements Conform to the operating system's requirements when higher than those given here. Windows Operating SystemWindows 8, Windows 8.1 Windows 7, Windows 7 SP1 Windows Vista SP1, Windows Vista SP2 Windows XP SP3 32-bit onlyBrowserInternet Explorer 8 or laterHard Disk Space3 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice.DisplayXGA 1024 x 768 Mac OS Operating SystemMac OS X v10.6.8 or laterBrowserSafari 5 or laterHard Disk Space1.5 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice.DisplayXGA 1024 x 768 Other Supported OS Some functions may not be available with each OS. Refer to the manual or the Canon web site for details on operation with iOS, Android, and Windows RT. Mobile Printing Capability Apple AirPrintGoogle Cloud PrintPrint from E-mailPIXMA Cloud Link• An internet connection is required to view the Online Manual. 379
•Windows: Operation can only be guaranteed on a computer with Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP pre-installed.• Windows: A CD-ROM Drive or internet connection is required during software installation. • Windows: Internet Explorer 8, 9, 10 or 11 is required to install Easy-WebPrint EX. • Windows: Some functions may not be available with Windows Media Center. • Windows: .NET Framework 4 or 4.5 must be installed to use the Windows software. • Windows: XPS Essentials Pack is required to print on Windows XP. • Windows: The TWAIN driver (ScanGear) is based on the TWAIN 1.9 Specification and requires the Data Source Manager bundled with the operating system. • Mac OS: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended. • Mac OS: For Mac OS, an internet connection is required during software installation. • In an in-house network environment, the 5222 port must be open. Contact the networkadministrator for details. Information in this guide is subject to change without notice. 380