Canon printer imageCLASS MF4570dn User Manual

2-5
Document and Paper Handling
 4  Fan the document stack and align the edges of the pages. 
     
Thoroughly fan in
small batches Align the edges on a 
flat surface a few times
 
 5  Neatly place the documents face up. 
•   Load the document under the load limit guides (A). 
•   Ensure that the paper stack does not exceed the load limit marks 
(B). 
     
(A)
(B)  
 6  Align the document guides to fit the width of the 
document. 
 The machine is ready to scan the document. 
       
  
  IMPORTANT 
 Up...

2-6
Document and Paper Handling
 Paper  Size 
 The available paper sizes are as follows.    
  



2-7
Document and Paper Handling
 Paper  Type 
 The available paper types are as follows. 
Paper TypePrinter Driver Setting Paper Source
Paper Capacity 
(Paper Cassette) Paper Capacity
(Multi-purpose Tray)
Plain paper *116 to 21 lb Bond (60 to 80 g/m²) [Plain Paper]
[Plain Paper L]*2250 sheets
1 sheet
21 to 24 lb Bond (80 to 90 g/m²) 170 sheets
Heavy paper 24 to 28 lb Bond (90 to 105 g/m²)
[Heavy Paper 1]170 sheets 1 sheet
28 to 32 lb Bond (105 to 120 g/m²) 100 sheets 1 sheet
45 to 60 lb Cover (120 to 163...

2-8
Document and Paper Handling
 The shaded area indicates the approximate printable area of A4 paper. Note that the margin widths listed below are rough 
standards and there may be slight variations in actual use.    
 
1/4 in.
(5 mm) 1/4 in.
(5 mm) 1/4 in.
(5 mm)
1/4 in.
(5 mm)  
   Printable  Range  

2-9
Document and Paper Handling
 This section describes how to load paper in the paper cassette 
and the multi-purpose tray. 
  NOTE 
   If you use paper of a different size or type 
   The default paper size/type is set to  and  in the setting menu. If you use a different paper 
size or paper type, you need to change the paper settings. 
 
 “Setting a Paper Size and Type” (àP.2-14) 
  
  
   In  the  Paper  Cassette 
   
 Before loading paper in the paper cassette, see  “Precautions 
when Loading...

2-10
Document and Paper Handling
 (3)  Loosen any stiff corners of the envelopes and flatten curls as shown in the figure. 
             
 (4)  Align the edges of the envelopes on a flat surface. 
    
        
 (5)  Gently load the envelopes into the paper cassette with the print 
side face up, until the edge of the envelope stack meets the 
back of the paper cassette. 
  
 4  Adjust the paper guides to the width of the paper. 
         
   5  Adjust the paper guide to the length of the paper....

2-11
Document and Paper Handling
 In the Multi-Purpose Tray  
 
Before loading paper in the multi-purpose tray, see 
“Precautions when Loading Paper” (àP.2-12).
 
 Use the multi-purpose tray when you want to copy or print on 
a paper that is different from what is in the paper cassette. 
 You can load a single sheet of paper in the multi-purpose tray. 
  
 1  Spread the paper guides a little wider than the  paper. 
         
 2  Gently insert the paper into the multi-purpose 
tray with the print side...

2-12
Document and Paper Handling
  CAUTION 
 Be careful when handling paper 
 Handle paper carefully not to cut your hands with the edges 
of the paper. 
 Precautions when inserting the paper cassette 
 Be careful not to catch your fingers. 
   Precautions  when  Loading  Paper 
  IMPORTANT 
 Be sure to align the paper guides with the width of the 
paper. 
•   If the paper guides are too loose or too tight, this may result in misfeeds or paper jams.  
•   Printouts may be askew depending on the printing...

2-13
Document and Paper Handling
   Paper  Loading  Orientation 
  NOTE 
 Paper loading orientation when loading in the multi-
purpose tray 
 Paper loading orientation for the multi-purpose tray is same as 
which for the paper cassette. 
  
  
       When  printing  paper  with  a  letterhead  or  logo 
(previously printed paper) 
 Load the paper as shown below. 
 (: Feeding direction) 
  
Portrait layout Landscape layout 
1-sided 
printing *1
(with the printed side 
face up)(with the printed side 
face...

2-14
Document and Paper Handling
 Whenever you change the paper size and type loaded in the 
cassette or tray, follow the procedure in this section to adjust 
the paper size and type settings. 
  IMPORTANT 
 If the setting is different from the size of the loaded 
paper 
 An error message appears, or printing is not performed correctly. 
  
 
Keys to be used for this operation
Paper Settings
OK 
 1 Press [] (Paper Settings). 
 2 Press [] or [] to select  or 
, and then press [OK]. 
     
Paper Settings...