Canon printer imageCLASS MF4570dn User Manual

xv
 C. Power Requirements  The machine should be connected to a standard 120 volt 
AC, three-wire grounded outlet only. 
 Do not connect this machine to an outlet or power line 
shared with other appliances that cause “electrical noise.” Air 
conditioners, electric typewriters, copiers, and machines of 
this sort generate electrical noise that often interferes with 
communications equipment and the sending and receiving 
of documents. 
  
 Connection of the Equipment 
 This equipment complies with Part...

xvi
 Notice •   This product meets the applicable Industry Canada  technical specifications. 
•   The Ringer Equivalence Number is an indication of the  maximum number of devices allowed to be connected to 
a telephone interface. The termination of an interface may 
consist of any combination of devices subject only to the 
requirement that the sum of the RENs of all the devices 
does not exceed five. 
•   The REN of this product is 1.0. 
•   Before installing this equipment, users should ensure that  it...

xvii
 This machine complies with 21 CFR Chapter 1 Subchapter J as 
a Class 1 laser product under the U.S. Department of Health 
and Human Services (DHHS) Radiation Performance Standard 
according to the Radiation Control for Health and Safety 
Act of 1968. This means that the machine does not produce 
hazardous radiation. 
 Since radiation emitted inside the machine is completely 
confined within protective housings and external covers, the 
laser beam cannot escape from the machine during any phase 
of...

xviii 

1-1
Chapter
1
  Before Using the Machine  
 This category describes the features of the machine and its useful functions. 
Names and Functions on Each Part of the 
Machine 1-2
Front Side 1-2
Back Side  1-3
Interior 1-3
Multi-purpose Tray  1-4
Paper Cassette  1-4
Operation Panel  1-5
LCD (Standby Mode)  1-6
Copy Mode  1-6
Fax Mode  1-6
Scan Mode  1-6
Navigating the Menu 1-7
Entering the Menu Screen  1-7
Scrolling Through Menu Items  1-7
Selecting a Menu Item  1-7
Specifying values using the navigation...

1-2
Before Using the Machine
 This section describes the parts and functions of the machine. 
 Front  Side 
 (15)
(1)(2)
(3) (4)
(10)
(11)
(13) (14)
(5)
(6)
(7)
(8)
(9)
(12)  
 Names and Functions on Each Part of the Machine 
 (1)  Document  guides  
 Adjust to the width of the document. 
 (2)  Feeder  cover  
 Open this cover to clear paper jams. 
 (3)  Lift  handles 
 Hold this handle to lift or transport the machine. 
 (4)  Tray  extension  
 Pull out the tray extension when the paper is hanging out...

1-3
Before Using the Machine
 Back  Side 
 
Ô MF4570dn   ÔMF4450
(2)
(1)
HAND
SET 
EXT.
LINE
HAND
SET  EXT.
LINE
(3)
(4)
(5)
(6)
(7)
(8)
HAND
SET  EXT.
LINE
HAND
SET  EXT.
LINE
(3)
(5)
(6)
(7)
(8)
(1)
 (1)  Rating  label 
 The average values of the required voltage and current are 
specified. 
 (2)  Rear cover (MF4570dn only)  
 Open this cover to clear paper jams. 
 (3)  USB  port  
 Connect to a computer via a USB cable. 
 (4)  LAN port (MF4570dn only)  
 Connect to a network via a LAN cable. 
 (5)...

1-4
Before Using the Machine
   Multi-purpose  Tray 
 
(1) 
  
 (1)  Paper  guides  
 Adjust to the width of the paper. 
   Paper  Cassette  
 
(1)
(2)  
 (1)  Dust  cover 
 Protects paper in the paper cassette from dirt and dust. 
 (2)  Paper  guides 
 Adjust the paper guides to the paper.  

1-5
Before Using the Machine
   Operation  Panel  
 (3)(5)
(2)(6)
(4)(1)  
(1)Mode switching keys
Press to switch the mode to copy, fax, or scan.
(2)
[One-touch Speed Dial] keys 
([01]/[02]/[03]/[04] keys)Press to specify recipients registered under one-touch keys.
[Address Book] key Press to search recipients registered under one-touch keys or coded dial codes.
[Redial] key When faxing, press to redial the last number.
[Pause] key When entering a fax number, press to insert a pause.
[Hook] key Press to...

1-6
Before Using the Machine
 LCD  (Standby  Mode)   
 This section describes the following screens. •  Copy Mode 
•  Fax Mode 
•  Scan Mode 
  NOTE 
 Display of the standby mode 
•   You can change the standby display which appears when the  power switch is turned ON. 
 
 e-Manual  à Basic Operation à Customizing Display 
Settings à Setting the Default Screen 
•   When the machine is idle for 2 minutes, the display returns to  standby mode. 
 
 e-Manual  à Basic Operation à Customizing Timer...