Canon printer imageCLASS MF4370dn User Manual

Settings from a PC (MF4380dn/MF4370dn Only)
9-4
  Starting the Remote UI    
Sta rtin g t h e R em ote  U IStarting the Remote UI
To start the Remote UI, follow the procedure described below.
Before you start the Remote UI, perform the following:
Select  in  located in the , and verify the IP address of the 
machine. If you do not know the IP address, consult with your network administrator. (See “Confirming IPv4 Address 
Settings and Checking IPv4 Connection,” or “Confirming IPv6 Address Settings,” in...

Settings from a PC (MF4380dn/MF4370dn Only)
9-5
Starting the Remote UI
 4 
Enter the required data. 
 The required data differ depending on the 
authentication mode you are using. 



Settings from a PC (MF4380dn/MF4370dn Only)
9-6
Starting the Remote UI
 6 
Operate the Machine. 
 Now you can manage the machine on the web 
browser. 
 For details, see “Settings from a PC,” in the e-
Manual. 
   

Maintenance 
10
  
   Maintenance   
  
 This chapter describes how to perform routine cleaning operations, and replace toner cartridge. 
Cleaning the Machine ...............................................10-2
Exterior ..................................................................\
............... 10-2
Interior ..................................................................\
................ 10-2
Fuser Roller.............................................................\
............. 10-5...

10-2
Maintenance 
  Cleaning  the  Machine    
    Cle an in g t h e M ach in eCleaning the Machine
Note the following before cleaning your machine:
Make sure no documents are stored in memory, then turn OFF the main power switch and 
disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to 
the components or generate static charges.
Never use volatile liquids such as thinners, benzene,...

10-3
Maintenance 
Cleaning the Machine
 3 
Lift the scanning platform (A) until it is 
locked. (You will hear an audible “click.”) 
  
 4 
Hold the grip (A) on the right front side of 
the toner cover. 
  
 5 
Open the toner cover. 
  
 6 
Remove the toner cartridge. 
  
Do not touch the rollers and parts which have 
labels “CAUTION! Hot surface avoid contact” on. 
They become very hot during use.
To avoid exposing the toner cartridge to light, 
place it in its protective bag or wrap it in a thick...

10-4
Maintenance 
Cleaning the Machine
 7 
Use a clean, soft, dry, lint-free cloth to 
remove any toner or paper debris from 
the machine’s interior. 
Do not touch the fixing assembly (A) as it 
becomes very hot during use.
Do not touch the transfer roller (B) as this can 
damage the machine.
If your hands or clothes get dirty from touching 
the toner, wash them immediately in cold 
water. Do not use hot water. If you do, the toner 
may be set permanently.
–
–
–
 8 
Hold the toner cartridge by its...

10-5
Maintenance 
Cleaning the Machine
  1212
  Close the toner cover. 
  
  1313
  Lower the scanning platform. 
  
Be careful not to get your fingers caught.
If you cannot close the toner cover, do not force 
it to close. Open the cover and make sure the 
toner cartridge is properly set in the machine.
–
–
  1
414
  Reconnect the power cord and turn ON 
the main power switch. 
        Fu se r R olle r Fuser Roller 
 If black streaks appear with printing, the fuser roller 
in the main unit may be...

10-6
Maintenance 
Cleaning the Machine




10-7
Maintenance 
Cleaning the Machine
 4 
Close the ADF. 
  
Be careful not to get your fingers caught.
       ADF  (For  MF4380dn) 
 If your documents have black streaks or appear 
dirty after copying them using the ADF, this may be 
caused by pencil lead rubbing off the documents 
and onto the roller. Clean the ADF scanning area 
and roller. 
 1 
Turn OFF the main power switch and 
disconnect the power cord. 
 2 
Open the ADF cover. 
  
Ô
 3 
Clean the rollers (A) inside the ADF with a 
cloth...