Canon printer FAXPHONE L80 User Manual

Chapter 6 Speed Dialing6-1
Speed Dialing
Chapter 6
Speed Dialing
This chapter describes how to register and use speed dialing.
What is Speed Dialing?............................................................................6-2
Speed Dialing Methods ..........................................................................6-2
Registering One-Touch Speed Dialing...................................................6-3
Registering Coded Speed...

6-2Speed Dialing Chapter 6
What is Speed Dialing?
Instead of having to dialing a fax or telephone number using regular dialing (e.g. with
the numeric buttons), you can simplify the dialing procedure by registering the
fax/telephone number for speed dialing. This will reduce the number of buttons you
need to press to dial the fax/telephone number, making it convenient for frequently
dialed numbers.
Speed dialing also allows you to register several fax numbers under one speed dialing
button or code so that...

Chapter 6 Speed Dialing6-3
Speed Dialing
Registering One-Touch Speed Dialing
By registering a fax/telephone number under a one-touch speed dialing button, you can
simplify dialing of that number to the press of a single button.
When you register one-touch speed dialing, you will:
–assign one of the 15 one-touch speed dialing buttons for the fax/telephone number
you want to register.
–register the fax/telephone number under that one-touch speed dialing button.
–register a name for the one-touch speed...

6-4Speed Dialing Chapter 6
7Use the numeric buttons to enter the 
fax/telephone number you want to
register (max. 120 digits, including
spaces and pauses).
•To enter a space, press Functionthen
Space.Spaces are optional and are
ignored during dialing.
•To enter a pause, press 
Pause
(1p.9-2).
•To correct a mistake in the number,
press ¬
to delete the rightmost digit.
Alternatively, press 
Clearto delete the
entire number.
•To cancel one-touch speed dialing for
the button you selected, press 
Clear
then...

Chapter 6 Speed Dialing6-5
Speed Dialing
11This completes the basic one-touch
speed dialing settings.
To continue registering other one- 
touch speed dialing buttons, press 
Set
twice and repeat the procedure from
step 5.
-or-
To end registering one-touch speed 
dialing buttons, press 
Stop/Resetto
return to standby mode.
-or-
To register the transmission type for
the current button you are registering,
continue with the steps below.
12Press Set.
13Use ∂or ¨to select ON.
14Press Settwice.
15Use ∂or ¨to...

6-6Speed Dialing Chapter 6
■If you selected REGULAR TXin step 15:
16Press Set.
17Press Stop/Resetto return to standby 
mode.
■If you selected PSWD/SUBADDRESSin step 15:
The other party’s fax machine may require an ITU-T-standard subaddress and/or
password to receive faxes. The subaddress/password you register here must match
exactly the one(s) registered on the other party’s fax machine. Contact the other party
to check their settings.
When sending with a subaddress/password, the other party’s fax...

Chapter 6 Speed Dialing6-7
Speed Dialing
20Press Set.
21To continue registering other one-
touch speed dialing buttons, repeat
the procedure from step 5.
-or-
Press 
Stop/Resetto return to standby 
mode.
n
•Use the destination labels provided with your machine to label the one-touch speed
dialing buttons. Stick the labels above each corresponding button.
•To check your entries, you can print a list of all the numbers and names registered for
one-touch speed dialing (1
p.6-19).
12/26       FaxTel  
05= 

6-8Speed Dialing Chapter 6
Registering Coded Speed Dialing
By registering a fax/telephone number under a coded speed dialing code, you can
simplify dialing of that number to pressing 
Coded Dialand entering the registered two-
digit code.
When you register coded speed dialing, you will:
–assign one of the 100 codes for the fax/telephone number you want to register.
–register the fax/telephone number under that coded speed dialing code.
–register a name for the coded speed dialing code. This name appears...

Chapter 6 Speed Dialing6-9
Speed Dialing
8Press Settwice.
9Use the numeric buttons to enter the 
fax/telephone number you want to
register (max. 120 digits, including
spaces and pauses).
•To enter a space, press Functionthen
Space.Spaces are optional and are
ignored during dialing.
•To enter a pause, press 
Pause
(1p.9-2).
•To correct a mistake in the number,
press ¬
to delete the rightmost digit.
Alternatively, press 
Clearto delete the
entire number.
•To cancel coded speed dialing for the
code you...

6-10Speed Dialing Chapter 6
13This completes the basic coded speed
dialing settings.
To continue registering other coded 
speed dialing codes, press 
Settwice
and repeat the procedure from step 7.
-or-
To end registering coded speed 
dialing codes, press 
Stop/Resetto
return to standby mode.
-or-
To register the transmission type for
the current code you are registering,
continue with the steps below.
14Press Set.
15Use ∂or ¨to select ON.
16Press Settwice.
17Use ∂or ¨to select the transmission
type...