Canon Pixma Mx492 User Guide

Setting the Telephone Line Type Manually in China
This section describes the procedure to set the telephone line type manually in China.1.
Make sure that the machine is turned on.
2.
Press the  Setup button.
The  Setup menu  screen is displayed.
3.
Use the  button to select  Fax settings, then press the  OK button.
4.
Use the  button to select  FAX user settings , then press the OK button.
5.
Use the  button to select  TEL line auto select , then press the OK button.
The current telephone line type is...

Setting the Receive ModeSet the receiving operation (receiving mode).
For details on how to set the receive mode:
Setting the Receive Mode
You can select the appropriate mode.
For details on the selectable receive mode:
About the Receive Mode
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
Note
•
The receiving operation procedure varies depending on the selected receive mode. For details on receiving method depending on each receive mode:
Receiving Faxes
•
If...

About the Receive Mode•
DRPD is available only in the US and Canada.
•
Network switch  may not be available depending on the country or region of purchase.
•
Refer to Receiving Faxes  for information on receiving faxes or the procedure for each receive
mode.
About the Receive Mode You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for
fax, etc.
Receive
modeYour fax use conditionReceiving operationTEL priority
modeWhen mainly receiving voice
calls (with...

If you select ON, the machine automatically receives faxes after the external device rang a
specified length of time.
You can specify the length of time until automatic reception is started.◦
User-friendly RX
If you select  ON, the machine automatically switches from telephone calling to fax reception by
detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering
machine answers. When you have an answering machine connected to the machine, select  ON to
switch to fax...

Setting the DRPD Ring Pattern (US and Canada only)
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone
company, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls
using only one telephone line. Your machine will automatically monitor the ring pattern, and will
automatically receive the fax if the ring pattern...

Setting the Sender InformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number.
About the Sender Information
Setting the Date and Time
Setting Daylight Saving Time (Summer Time)
Registering User Information
About the Sender InformationIf the unit name and unit fax/telephone number are registered, they are printed with date and time as
sender information on the recipient's fax.
A.
Date and time of transmission
B.
Unit fax/telephone number
C.
Unit name
D....

1.Make sure that the machine is turned on.2.
Press the Setup button.
The  Setup menu  screen is displayed.
3.
Use the  button to select  Device settings, then press the OK button.
4.
Use the  button to select  Dev. user settings , then press the OK button.
5.
Use the  button to select  Date/time setting , then press the OK button.
6.
Set the date and time.
Use the 
 button to move the cursor under the desired position, then use the Numeric buttons to
enter the date and time.
Enter the date and time in...

4.Use the  button to select Dev. user settings , then press the OK button.5.
Use the  button to select  DST setting, then press the  OK button.
6.
Use the  button to select  ON, then press the  OK button.
To disable summer time, select  OFF.
7.
Set the date and time when summer time starts.
1.
Use the  button to select  Start date/time, then press the  OK button.
2.
Make sure that  Set month is selected, then press the  OK button.
3.
Use the  button to select the month when summer time starts, then press...

Registering User Information
This section describes the procedure to register the user information.
Note
•
Before sending a fax, be sure to enter your name and fax/telephone number in  Unit TEL no. registr.
and  Unit name registr.  on the FAX user settings  screen (for US only).
1.
Make sure that the machine is turned on.
2.
Press the Setup button.
The  Setup menu  screen is displayed.
3.
Use the  button to select  Fax settings, then press the  OK button.
4.
Use the  button to select  FAX user settings ,...

Sending Faxes Using the Operation Panel of the Machine
Sending Faxes by Entering Fax/Telephone Number Basic
Resending Faxes (Redialing a Busy Number)
Setting Items for Sending Faxes
Sending Faxes Using Useful Functions
690