Canon Pixma Mx492 User Guide

Selecting a Response to Commands from the Operation Panel
Using IJ Scan Utility
IJ Scan Utility allows you to specify how to respond when scanning from the operation panel.
Note
•
The screens for scanning with Auto Scan from the operation panel are used as examples in thefollowing descriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box appears.
3.
Select a scan mode on the  (Scanning from the Operation Panel) tab.
671
 

Note•
Refer to the following for details.
Settings (Save to PC (Auto)) Dialog Box
Settings (Save to PC (Photo)) Dialog Box
Settings (Save to PC (Document)) Dialog Box
4.
Set Scan Options .
5.
Specify the file name and other settings in  Save Settings.
672
 

6.
Select the application you want to start after scanning in Application Settings.
673
 

7.Click OK.
The responses will be executed according to the specified settings when you start scanning from the operation panel.
674
 

Faxing
Preparing for Faxing
 
Sending Faxes Using the Operation Panel ofthe MachineRegistering Recipients
 
Receiving FaxesOther Useful Fax Functions
 
Sending Faxes from a Computer
675
 

Preparing for FaxingConnect the machine to the telephone line and set up the machine before using the faxing functions. Thenspecify the basic setting such as sender information, date/time, and daylight saving time.
Important
•
If the Power Disconnects Unexpectedly:
If there is a power failure or if you accidentally unplug the power cord, the date/time settings will be
reset.
•
The settings for user information and directory will be retained.
•
All faxes stored in the machine's memory, such as unsent...

Connecting the Telephone LineThe connection method differs depending on your telephone line.•
If you connect the machine to wall telephone line directly/If you connect the machine with the xDSLsplitter:
Basic Connection
•
If you connect the machine to another line such as an xDSL:
Connecting Various Lines
If the connection is incorrect, the machine cannot send/receive faxes. Connect the machine correctly.
Important
•
Do not connect fax machines and/or telephones in parallel (US and Canada only). If two...

Important•
Be sure to connect the telephone line before the machine is turned on.
If you connect the telephone line when the machine is turned on, turn the machine off and unplug the power cord. Wait for 1 minute then connect the telephone line and power plug.
Note
•
Refer to Rear View  for the position of the telephone line jack and the external device jack.
•
Before connecting a telephone or answering machine, remove the Telephone connector cap.
•
For users in the UK:
If the connector of the external...

Note•
When connecting to the xDSL line, select the same line type as you are subscribing to in
Telephone line type .
Setting the Telephone Line Type
•
Connecting to an xDSL
A.
Analog Subscriber Line
B.
xDSL modem (splitter may not be built-in to the modem)
C.
Computer
D.
Telephone or answering machine
Important
•
When the splitter is not built-in to the modem, do not branch the telephone line before the splitter
(wall side). And also, do not connect splitters in parallel. The machine may not be able to...

Setting the Telephone Line TypeBefore using your machine, make sure you set the correct telephone line type for your telephone line. If you
are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,
contact the telephone company or service provider to confirm your line type.
Important
•
For users in China
After plugging the power cord and turning on the machine, the telephone line type is selected automatically. However, if the machine is connected to the...