Canon Pixma Ip110 User Guide

1688Cause
Ink has run out. (The lamp on the ink tank flashes.)
Action Replace the ink tank and close the print head cover.
Printing under the current condition may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the printer's  RESUME/CANCEL button for at least 5 seconds, and
then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized....

1689Cause
The remaining ink level cannot be correctly detected.
ActionReplace the ink tank and close the print head cover.
Printing with an ink tank that was once empty may damage the printer.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the printer's  RESUME/CANCEL button for at least 5 seconds, and
then release it.
With this operation, releasing the function for detecting the remaining ink level is...

1700Cause
The ink absorber is almost full.
Action Press the printer's  RESUME/CANCEL  button to continue printing. Contact the service center.503
 

1701Cause
The ink absorber is almost full.
Action Press the printer's  RESUME/CANCEL  button to continue printing. Contact the service center.504
 

1810Cause
Battery has exhausted.
Action If printing is in progress, cancel printing.
Turn off the printer, then either change to a fully charged battery pack or detach the battery attachment and connect the supplied AC adapter to the printer.505
 

2100Cause
The paper size in the print settings and the size of the loaded paper do not match.
Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's
RESUME/CANCEL  button.
If you want to cancel printing, press the printer's  RESUME/CANCEL button again while the  POWER lamp
is flashing.506
 

2101Cause
The paper size in the print settings and the size of the loaded paper do not match.
Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's
RESUME/CANCEL  button.
If you want to cancel printing, press the printer's  RESUME/CANCEL button again while the  POWER lamp
is flashing.507
 

2103Cause
The printer cannot detect the paper size.
Action Press the printer's  RESUME/CANCEL  button to dismiss the error, then try to print again.
If this error still occurs even after printing again, set the printer not to detect the paper width by using the printer driver or Remote UI.
Note
•
Depending on the type of paper, the printer may not detect the paper width.
Additionally, if the print head cover is opened while printing is in progress, the printer may not detect
the paper width.
508
 

2500Cause
The cause of following may have occurred the failure of Automatic Print Head Alignment.•
Print head nozzles are clogged.
•
The paper of size other than A4 or Letter is loaded.
•
The paper output slot is exposed to strong light.
Action
Press the printer's  RESUME/CANCEL  button to dismiss the error, then take the actions described below.
•
Print the nozzle check pattern to check the status of the print head.
•
Load a sheet of A4/Letter-sized Canon Matte Photo Paper MP-101 and perform...

4103Cause
Cannot perform printing with the current print settings.
Action Press the printer's  RESUME/CANCEL  button, to cancel printing.
Then change the print settings and print again.510