Canon network camera VBR13 User Manual

Setting Page
5
171
Camera Tampering Detection
Detect when capture is being disrupted. This can be used to detect when the camera orientation is changed or the 
video display is obscured with spray, etc. Camera  tampering detection is triggered when an area exceeding a 
specified ratio of change is continuously altered.
Passing Detection
Detect when a person or moving  object crosses a specified line.
This determines that an object is passing when the decisi on point of the object detection frame crosses...

172
Intrusion Detection
Detect when a person or moving object crosses a specified area. This can be used to detect actions such as when 
someone climbs over a barrier and enters a restricted area in  a museum, etc. This determines that an object is entering 
when the decision point of the object detection frame enters the detection area and the specified duration has elapsed.
 Auto Tracking
The camera automatically tracks an object when it is detect ed moving in a detection area. This allows monitoring...

Setting Page
5
173
 If [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page are changed, be sure to change the 
preset position settings ( ) and Intelligent Funct ion settings, and check operations. The Intelligent 
Function may not operate, depending on the settings.
 Please set the Intelligent Function again if  the angle of view has changed through camera operation, or the preset/home 
position has changed.
 If [Status] in [Detection Setting List ] has [Enabled] when the...

174
For [Video Detection], please refer to “[Event] > [Intelligent Function]  - Video Detection -” (P. 175) to configure 
video detection settings.
For [Auto Tracking], please refer to “[Event] > [Intelligent Function] - Auto  Tracking -” (P. 192) to configure Auto 
Tracking settings.
3Set the Selected Operation Mode 

Setting Page
5
175
In video detection, select the type to detect, and set the tracking area for video changes while checking images on the 
camera. You should also set which operati ons (e-mail notification, record video, playing audio from the speaker connected 
to the camera) should be carried  out when changes are detected.
Steps for Configuring Video Detection
Set an area where changes in video are detected and an ar ea where changes in video are not detected (non-detection 
area) as necessary.
...

176
Note
You can register up to 15 detection settings.
The detection settings added to [Detection Settings] are displayed and [Enable these detection settings] is 
selected.
Note
 To disable the detection settings, clear t he [Enable these detection settings] checkbox.
 Enter the [Detection Settings Name (within 64 half-w idth alphanumeric characters)] if necessary (P. 180).
 To delete detection area settings, select the detection area setti ngs to delete and click [Delete] in Detection Settings (List)....

Setting Page
5
177
the detection type.
Set which operations to carry out for video detection in the [Event] tab (P. 197).
The settings are saved to the camera.
Note
To restore settings, click [Clear] before  applying. This discards the settings you have  specified and restores the settings saved in 
the camera. However, note that detection settings only added to  the detection setting area by clicking [Add] are all discarded.
You can check the detection stat us of the specified detection settings in...

178
The non-detection area settings added in [Non-detection Area Settings] are displayed and [Enable non-detection 
area] is selected.
Note
 Up to five non-detection area settings can be registered.
 To disable non-detection area settings, cl ear the [Enable non-detection area] checkbox.
 To delete non-detection area settings, select the non-detection  area settings to delete and click [Delete] in Non-detection Area 
Settings (List).
Click the mouse to create a polygon. For information on th e creation...

Setting Page
5
179
Note
 You can create a polygonal area with a maximum of 32 vertices. You cannot set a non-detection area with only a straight line.
 Click [Clear Area] to set the non-detection area again.
 Enter [Non-detection Area Name (within 64 hal f-width alphanumeric characters)] as necessary.
 The non-detection area is displayed in the video display  area in black. The display color cannot be selected.
The settings are saved in the camera.
Note
Click [Clear] to discard the settings and restore...

180
Settings Common to Each Detection Type
(1) [Detection Settings Name (within 64 half-width alphanumeric characters)]
Enter a detection name. Be sure to enter a name in [Detection Settings Name].
(2) [Area Shape] Configure whether the detection area is  a rectangle or a free-shape polygon.
Note
You cannot select [Area Shape] for camera tampering detection.
Using [Rectangular]
Configure the detection area by moving, resizing or changing  the shape of the rectangle that is displayed in the 
video...