Canon network camera VBR13 User Manual

Setting Page
5
191
The settings are saved and the Intelligent Function restarts.
Context Menu
Right-click on the video display area, Detection Settings (List) and Non-Dete ction Settings (List) to display a menu that 
allows you to use the following functions. Unavailabl e functions will be grayed out when you right-click.
[Copy detection area/line]
Copy the detection area/line of the select ed detection setting to the clipboard.
[Paste detection area/line]
Paste the copied detection area/line from the...

192
For Auto Tracking, set the detection area for moving objects while checking the video on the computer screen. The camera 
is controlled so that the detected moving object appears near the center of the video display area. You can also set which 
operations (such as e-mail notification, recording video, or playing audio from  the speaker connected to the camera) are 
carried out when detection occurs.
Setting Auto Tracking
Use the following steps  to set Auto Tracking.
For details on how to adjust...

Setting Page
5
193
Use a rectangle to specify the detection area (P. 180).
Note
The detection area is set to display within a rectangular area by default. It cannot be set to the edge of the video display area.
Set the size ratio of moving objects for the entire screen.
When the setting values or slider is changed, or the detection area is changed, an indicator representing the 
object size is displayed for one second in the center of the video display area allowing you to check the size ratio 
while...

194
For details on settings, please refer to “Configuring Operations for “Detected” ([Event] Tab)” (P. 197).
The settings are saved to the camera.
If you keep control privileges, the  camera does not automatically track.
For the camera to automatically track moving obj ects, it is necessary to release control privileges.
Detection Status for Auto Tracking
All moving objects detected are shown with contour lines.
If a moving object is smaller than [Object Size (%)], its contour lines are white.
If the...

Setting Page
5
195
Auto tracking prioritizes tracking the first detected moving object. While auto  tracking, other moving objects will not 
be detected even if they sati sfy [Tracking Start Conditions].
Note
The detection status of auto tracking can also be checked in t he [Event and Input/Output] menu of the Camera Viewer (P. 85).
Auto Tracking Termination
Auto tracking will be terminated in the following cases.
 The Camera Viewer, etc. obtained camera control privileges or the video is displayed on...

196
Displaying Settings for Detection Areas and Detection Results 
(Display Options)
Select whether to display the detection area and  detection results in the video display area.
You can select [Display]/[Do not display] for  both [Detection Area] and [Detection Results].
[Detection Area] can only be displayed when you have obtained camera control privileges. 

Setting Page
5
197
This explains functions common to both video detection and auto tracking.
Configuring Operations for “Detected” ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
(1) Specify Operation Timing (Multiple Selections Possible) [ON Event Operation]
When selected, the operations set in (2) are performed when the mode becomes “detected”.
[OFF Event Operation]
When selected, the operations set in (2) are performed when “detected” mode ends.
[Detected mode...

198
[Sound Clip Name]
Select the sound clip to be played back. You must register the sound clip with Sound Clip Upload 1 to 3 in [Video and 
Audio] > [Audio] (P. 148) on the Setting Page in advance.
[Volume]
Set the volume for the sound clip.
(5) External Device Output Operations
[External Device Output for ON Event]
Select this to start or pause output to an external device  when the mode becomes “detected”, and to select the output 
destination (output 1 or 2) and  operation (active or inactive)....

Setting Page
5
199
When events trigger the switching of Day/Night Mode, presets registered in advance can be executed, such as changing 
the camera angle or video quality settings.
Day/Night Mode Switching
[Preset when Switching to Day Mode]
Executes the preset when switched to Day Mode.
[Preset when Switching to Night Mode]
Executes the preset when  switched to Night Mode.
Note
 It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131).
 You can set the timing for event-triggered...

200
By linking two types of events, a single event is triggered. Select AND/OR for the event linking method.
You can set the operations to  perform, such as recording video or sending  e-mail notifications, when a linked event is 
triggered.
Note
You can check the linked event status on the [Event and  Input/Output] menu of the Camera Viewer (P. 85).
Linked Event 1 to 4
You can register up to four linked events.
You can link five types of events: [Volume Detection], [Scream Detection], [External  Device...