Canon network camera VBR13 User Manual

Setting Page
5
151
WS-Security
[Check Time on Authentication]
Select whether to check the time information of data transmitted by the client. 

152
Settings for clients that can connect to a video server.
Video Server
[Maximum Number of Clients]
Enter the maximum number of clients that can be connected to the camera at the same time.
If set to [0], only administ rators will be able to connect.
[Camera Control Queue Length]
Enter the maximum queue length for clients requesting  camera control privileges from the Camera Viewer.
If set to [0], only administra tors can queue for camera control.
[Maximum Connection Time (sec.)]
Enter the maximum time...

Setting Page
5
153
Settings for audio transmission from the camera to the computer, and audio reception from the computer to the camera.
Audio Server
[Audio Transmission from the Camera]
Select to transmit audio from the microph one connected to the camera to the Viewer.
[Voice Activity Detection]
Select whether to detect when there is  no sound coming from the microphone.
When set to [Enable], audio data transmission will pause while th ere is no sound input from the camera. This can reduce the 
load on...

154
Set the video and audio transmission using RTP.
RTP Server
Enable RTP, and set the RTSP authentication method and port number.
[RTP]
Select this to enable or disable RTP.
[RTSP Authentication Method]
Select an authentication method for RTSP. Since the RTSP authentication method is  configured independently of the HTTP 
authentication method, you need to  configure each authentication method.
[RTSP Port]
Enter the RTSP port number.
Normally use [554] (factory default setting).
Audio Multicast
Set...

Setting Page
5
155
RTP Streaming 1 to 5
You can set each stream for RTP stream transmission in an RTP Streaming 1 to RTP Streaming 5 session.
[Video Size]
Select the video format (JPEG or H.264 ) and video size for the RTP stream.
The video sizes for JPEG will vary dependin g on the [Video Size Set] settings (P. 104).
The video sizes for H.264 will be determined according to  the [H.264(1)] and [H.264(2)] settings in [Video] (P. 105).
In addition, [H.264(2)] cannot be set for multiple RTP streams.
[Frame...

156
Settings for uploading video via HTTP or FTP when an event is triggered.
Use [Server] > [Server] (P. 149) to  configure HTTP server and FTP server settings for uploading.
Video Record Setting
When an event is triggered, you can set whether to upload came ra video with HTTP or FTP or to record the video to a 
memory card.
This item can also be set with the [Memory Card] submenu (P. 215) and will be reflected in  [Video Record Setting] here.
[Video Record Action]
Select [Upload] to upload video....

Setting Page
5
157
[Upload]
Select whether to upload with HTTP or FTP.
[Video Format]
Select the video format for upload.
Video size and quality of the uploaded video follow the settings in [Video] (P. 104).
[Frame Rate]
Enter the maximum frame rate of video to be up loaded when [Video Format] is set to [JPEG].
[Pre-event Buffer (number of  frames)] (JPEG)/ [Pre-event Buffer (sec)] (H.264)
Enter the number of frames or seconds of  video to be buffered before the event.
Enter the maximum number of frames...

158
[Proxy Port]
If using a proxy server, enter the port number of the proxy server.
[Proxy User Name], [Proxy Password]
Enter to use a user name and password for the proxy server.
Digest authentication is not supported.
[Parameter (query string)]
Enter the request parameters.
Parameters can be specified using the “%” character (P. 226).
[HTTP Upload Test]
Clicking [Exec] initiates an upload test  based on the settings currently entered.
Only a single JPEG image will be uploaded , but it is not necessary...

Setting Page
5
159
[Subdirectory Name to Create], [File Name to Create]
If file naming is set to [User Setting],  enter the subdirectory name to be created  as well as the name of the created file.
Parameters can be specified in the entry with the “%” character (P. 226).
[FTP Upload Test]
Clicking [Exec] initiates an upload test  based on the settings currently entered.
Only a single JPEG will be uploaded,  but it is not necessary to click [Apply]  at that time. After entering a password,
first click...

160
Settings for sending an e-mail notification to a specified recipient when an event is triggered.
E-mail Notification
Set the mail server to be used for e-mail notifications and the content of the e-mail to be sent.
[Notification]
[Subject] and [Message Body] are text.
If you set [Text with Image], an im age (JPEG format) captured immediately before the event will be attached.
[Copy E-mail Settings]
Copy the e-mail settings used  in [Maintenance] > [Log] > [Log Notifications] (P . 222). However, the...