Canon network camera VBR13 User Manual

Setting Page
5
121
[Light Source]
If you selected [Compensate for light source], select the light source.
[Fluorescent]
Select this option to capture video under  fluorescent, LED, sodium or mercury lighting.
[Halogen Lamp]
Select this option to capture video  under halogen or incandescent lighting.
[Infrared Light (740nm)]
Select this option to capture video under  infrared (740 nm wavelength) illumination.
[Infrared Light (850nm)]
Select this option to capture video under  infrared (850 nm wavelength)...

122
[Day Mode]
Captures normal color video.
[Night Mode]
Removes the infrared filter to increase sensitivity. Video turns to monochrome. 

Setting Page
5
123
You can create a panorama image that captures the entire area that can be captured by the camera.
Created panorama images are displayed in t he Viewer and part of the Setting Page.
Creating a Panorama Image
A panorama image can be used in the Viewer and for a privac y mask by clicking [Apply] to save it to the camera after 
capturing.
Note
 While a panorama image is being captured, the Image Stabilizer is  temporarily disabled.
 The following users will be disconnect ed while creating...

124
Operate the camera angle to get the positioning value in the video display area, and specify the panorama 
creation range.
[Upper Limit]/[Lower Limit ]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left  limit, and right limit to set in the video display area.
Click [Get value] in each position to reflect the values to the panorama creation range frame.
Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limi t]/[Right Limit] to move the preview frame to the...

Setting Page
5
125
Capturing starts, and the panorama image is created.
Click [Cancel] to cancel capturing.
To recapture part of the image:
A lattice frame is displayed on  the created panorama image.
Right-click with the mouse pointer over the area to recapt ure and select [Recapture] to recapture that area only.
To capture the entir e panorama image again:
Click [Exec] of [Start] again.
The created image is not yet saved in the camera.
The panorama image is saved in the came ra and reflected in the...

126
The image file is saved in the specified location.
Opening the Image File
The panorama image is displayed.
Capture Settings
These settings will be applied at the panorama image capture start time and will revert back to their previous settings once 
capture is completed.
[Exposure Lock]
The exposure for the selected position will be au tomatically adjusted and locked during capture.
[White Balance Lock]
The white balance for the selected position will be  automatically adjusted and locked during...

Setting Page
5
127
Set the range that the camera can capture.
You can use this, for example, to limit zoom or the field of view to a certain range when publishing live video.
Scope of View Restriction Settings
Restrictions set by the view restriction function are applied in the following cases.
 When the Camera Viewer is accessed with au thorized user or guest user privileges.
 When accessed via RM-Lite.
 For presets or functions that move to preset positions.
Note
Even when view restrictions are set, an...

128
Configuring View Restrictions
Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer.
Note
To delete view restriction settings, select [Disable], and click [Apply].
Operate the camera angle in the video display area to ge t the positioning value, and specify the restrict view 
area.
[Upper Limit]/[Lower Limit ]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left  limit, and right limit to set in the video display area.
Click...

Setting Page
5
129
frame/telephoto preview frame and displays it in the video display area.
If you dragged the telephoto knob to th e upper limit and the wide-angle knob to the lower limit, the view restriction 
is disabled for each edge (t here is no restriction).
Four types of frames are displayed for panorama images.
Drag these frames on the panorama  screen to set the restrict view area.
(1) Pan/Tilt Preview Frame (Red Frame) Displays the vertical and horizontal range the camera can move. You can...

130
Note
 The panorama screen may be slightly different from the actual image. After you have configured view restrictions, be sure to use 
the Camera Viewer to confirm they have been reflected correctly.  View restrictions are not applied to the video display area of the 
restrict view setting.
 The controllable range and range that can be captured are as follows.
 The pan and tilt ranges vary depending on the zoom ratio (view angle).
 If the view restriction will be exceeded as a result of zooming...