Canon network camera VBR13 User Manual

Setting Page
5
131
By registering settings as presets, such as camera angles, camera settings (e.g. exposure) and Day/Night Mode switching, 
the presets can be easily called up  by Viewers to apply the settings.
Using Presets
In addition to immediate execution of registered camera  angles and the camera settings such as exposure when 
operating the viewer, you can use presets as follows.
 Execute the presets duri ng switches between Day Mode and Night Mode (P. 199).
 Automatically cycle through multiple...

132
The camera angle can also be operated from the following screens.
Panorama screen 
Digital PTZ panel 
Set the items to apply in the preset.  For a description of each item, please refer to “Camera Settings” (P. 113).
[Pan/Tilt/Zoom position] /[Digital PTZ Position]
Select [Register] to register the current camera angle as a preset.
Note
If you selected [Home] (home position) in  the preset list, [Pan/Tilt/Zoom position]/[Digital PTZ Position] is always registered.
[Camera Settings]
Select [Register]...

Setting Page
5
133
Enter a preset name. Be sure to enter a preset name in [Preset Name (alphanumeric characters)].
[Show in Viewers]
Select [Enable] to allow the Came ra Viewers to use the preset.
Note
If the preset position is outside the restrict view area,   (a warning icon) is displayed on the left.
The preset is saved in the camera.
Note
Click [Clear] to discard the settings and restore the settings sa ved in the camera. However, note that presets only registered to the 
preset list by clicking [R...

134
You can have the camera automatically tour multiple registered presets to allow monitoring.
Note
 Preset tour is not performed while the camera control privileges are obtained in the Camera Viewer or the video is displayed in the 
Setting Page.
 Preset tour is not performed when contro l privileges are obtained by RM-Lite.
Screen Composition
The screen composition differs according to the camera model,  because the number of tour routes that can be registered, 
number of presets that can be toured...

Setting Page
5
135
(1) [Route List]The list of preset tour routes. Displa ys the tour conditions that are set. Up to five tour routes can be set.
(2) Tour Condition Settings Set the conditions for touring and the tour route name (P. 136).
(3) Preset Tour List Displays a list of the presets to tour. The pr esets are toured from the top of the list.
You can change the order of the pr esets and set the time to stop at the preset positions, etc.
(4) Video Display Area Displays the current camera video.
(5)...

136
(a) Pan/Tilt Preview Frame (Red Frame)Displays the vertical and horizontal  range the camera can move. Displayed when the restricted view is set 
(P. 127).
(b) Preview Frame (Blue Frame) Indicates the current trim posi tion in the video display area.
(c) Preset Preview Frame (White Frame) Indicates the preset/home position  that is currently selected.
(6) Digital PTZ Panel Displays the full video obtained by the  camera when starting [Preset Tour].
(b) Preview Frame (Blue Frame) Indicates the current...

Setting Page
5
137
[Always]
Preset tour is always performed.
Note
When [Not used] is selected, the following preset tour route settings cannot be configured.
[Route Name (alphanumeric characters)]
Enter the tour route name.
[Specify Active Time]
Select [Specified] to configure a preset tour at a predetermined  time, and enter the start time and end time for the 
preset tour.
If [Viewers Connected] is set for [Effecti ve Conditions], the preset tour operates when the Viewer is connected to 
the camera at...

138
Note
If a preset has already been added to [Edit Tour Route] and is selected when another preset is added from the [Select Preset] list, 
the added preset will be displa yed below the selected preset.
Select the preset to configure in [Edi t Tour Route] and set the tour operation.
[Speed (PT)]
Select the camera pan/tilt speed  for moving to the next preset.
[Speed (Z)]
Select the camera zoom speed fo r moving to the next preset.
[Pause (sec)]
Enter the time the camera paus es at the preset position....

Setting Page
5
139
Reduces the size of transmitted H.264 video by reducing the video quality of non-target areas, such as ceilings and the sky.
ADSR is an abbreviation for Area-specific Data Size Reduction.
Note
 The image quality of the specified area depends on the [Bit Rate Control] setting in [Video] > [H.264(1)] or [H.264(2)].– When [Use bit rate control] is set: The image quality is adjust ed according to the situation to match the target bit rate.
– When [Do not use bit rate control] is set: The...

140
If you select [Enable] for the area with the frame color you would like to use for the specified area, the frame will be 
displayed on the Viewer.
Set the specified area as follo ws within the display area.
 Drag out a frame and move it to the area you want to specify.
 Change the size of the frame by dragging any of the eight handles ( ■).
 If you want to change the camera angle, use the pan/tilt/zoom sliders.
Note
If you change the camera angle before operating the area frame,  the area frame may...