Canon network camera VBR13 User Manual

Setting Page
5
181
[Clear Area]
The detection area configured with [Polygonal] is deleted.
(3) [Display Color] Select the color for detection areas and detection lines.
How to Configure Moving Object Detection
Set the area you want to detect a mo ving object in as a detection area.
This determines how large the moving ob ject must be in relation to the detection area you set in step 2 for motion 
detection to be triggered.
When the setting values or slider is changed, an indicato r representing the...

182
Note
If an object is placed in or removed from the moving object detection area, “detected”  status will be triggered for Moving Object 
Detection.
 How to Configure Abandoned Object Detection
Set the area you want to detect an aband oned object in as a detection area.
This determines how large the abandoned  object must be in the detection area you set in step 2 to detect as an 
abandoned object.
When the setting values or slider is changed, an indicato r representing the object size is displayed...

Setting Page
5
183
How to Configure Remo ved Object Detection
Set an area around the target objects, for Removed Obje ct Detection. The following methods are available for 
configuring removed object detection.
– Setting a broad area for det ecting the removal of objects
– Specifying the profile lines of objects for removal detection
If you cannot detect the intended objects usin g one of these methods, use the other method.
Setting a Broad Area for Detecting Removed Objects
Configure the following...

184
Specifying the Profile Lines of Objects for Removal Detection
Temporarily remove the target object for removed object detection from the video display area.
▼
Click [Restart intelligent function] (P. 198).
The background image is generated ▼
Return the target object to its original position.
▼
Click [Automatic Profile Settings].
A profile line of the object is drawn using a polygon with up to 32 vertices.
If there are multiple objects detected,  the profile lines are drawn around the object occupying...

Setting Page
5
185
Click [Restart intelligent function] again.
Detection Status for Removed Object Detection
All moving objects detected are shown with profile lines.
If you set [Object Size (%)] and [Duration (Sec)], the following occurs.– If [Object Size (%)] and [Duration  (Sec)] are not met, the profile line is displayed with a white line.
– If both [Object Size (%)] and [Duratio n (Sec)] are exceeded, the profile line is displayed in the same color as
the detection area to indicate that  something...

186
Detection Status for Camera Tampering Detection
Moving objects detected are shown with profile lines.
If an object is smaller than [Change Ratio (%)], its profile lines are white.
If the obscured area in the video exceeds [Change Ratio (%)], profile lines take on the same color as the detection 
area, indicating that the came ra has “detected” tampering.
Note
Detection will not be possible for three seconds after the change ratio for camera tampering detection is changed, or when 
switching to camera...

Setting Page
5
187
▼
To configure a polygonal detection line,  click the vertices of the line in order.
You can configure a polygo nal detection line with a maximum of 32 vertices.
▼
Click any of the set vertices.
The detection line is determined.
Note
 Even after configuring a detection line, you can drag each vertex  to change the shape of the detection line and the lines between 
vertices to move the entire detection line.
 Click [Clear Line] to delete a detection line.
If a moving object crosses the...

188
Note
A ratio of up to 30% can be set in [Object Size (%)] for passing detection.
Detection Status for Passing Detection
All moving objects detected are shown with white profile lines.
When the [Decision Point] of a moving object that meets th e [Object Size (%)] setting crosses a detection line in the 
direction specified in [Passing Direction], the profile lin e changes to the same color as the detection line, and the 
status becomes “detected”.
Notification of a passing detection event occurs only...

Setting Page
5
189
Set the size ratio of moving objects for the entire screen.
When the setting values or slider is changed, an indicator representing the object size is displayed for one 
second in the center of the video display area allowing you to check the size ratio while specifying the setting.
Detection Status for Intrusion Detection
All moving objects detected are shown with profile lines.
When [Decision Point] of a moving object larger than [O bject Size (%)] enters a detection area and exceeds...

190
No.1: Video Detection Status is ON
No.2 and 3: Video Detection Status is OFF
Displaying Settings for Detection Areas/Detection Lines, Non-Detection 
Area and Detection Results (Display Options)
Configure the detection area/line, non-detection area, and detection results displayed in the video display area.
You can select the following for either [Detection Area/Line] or [Detection Results].
[Selected Detection Settings Only]
Show the detection areas/lines or detection results only fo r those...