Canon network camera VBR13 User Manual

Appendix
6
241
A041 Number of uploads (FTP) [info]
A042 Number of uploads (HTTP) [info]
Memory card notification
M001 Starting and stopping of memory card 
control module [info]
M002 Valid management information 
inserted [info]
M003 Started/finished recreation of 
management information [info]
ONVIF notification (RTP)
R001 Startup of RTP distribution module 
[info]
R002 Stopping of RTP distribution module 
[info]
R003 RTSP PLAY request received [info]
R004 RTSP TEARDOWN request received 
[info]...

242
R005 Starting multicast [info]
R006 Stopping multicast [info]
Description start multicast:  profile=%1, num_of_sessions=%2(V=%3, A=%4, 
M=%5,BC=%6) (R005)
%1 Client IP address
%2 Profile name of requested  MulticastStreaming START
%3 Total distribution count of Video stream
%4 Total distribution count of Audio stream
%5 Total distribution count of Metadata  stream
%6 Total distribution count of  AudioBackChannel
Meaning Multicast was started.
Description stop multicast:  profile=%1,...

Appendix
6
243
Messages Displayed in the Information Display
Messages displayed in the information display of the Camera Viewer are classified into the following three types.
Warning Message
List of Viewer Messages
IconCategoryExplanation
Information Message Displays help messages related to vari ous buttons, pull-down lists, etc., as well as frame 
rate and other information.
Warning Message Displays a message urging caution to  the user when camera control privileges cannot be 
obtained, the audio...

244
Currently in the process of starting or ending 
audio transmission and receiving.Attempted to start or stop audio 
transmission while already processing 
starting or stopping of audio transmission and reception.
Cannot be controlled, because it is set to fixed at 
infinity mode. You tried to operate the focus when [Focus] was set to [Fixed at infinity].
Cannot be controlled, because it is set to manual 
mode. You tried to operate the Back Ligh
t Compensation button or exposure 
compensation when...

Appendix
6
245
If you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first.
It is recommended that you use [Setting  Page] > [Maintenance] > [Backup / Restor e] to create a backup file before 
restoring the factory default settings (P. 220).
Note
 Settings can also be backed up using the Camera Management Tool . For details on using the Camera Management Tool, please refer to 
“Camera Management Tool User Manual”.
 For factory default...

246
VB-R13The camera does not have a power swit ch. To turn the camera on or off, connect or disconnect the power cable.
The LED will flash.
When the LED stops flas hing, the reset procedure is complete.
Reset Switch LED
Reboot Switch
VB-H651V
1Turn the camera off.
2Hold down the reset switch and connect the power cable. Continue to hold the reset switch for five seconds or 
longer.
3Release the reset switch.
Reset Switch LED 

Appendix
6
247
VB-H652LVEWhen the LED stops flas hing, the reset procedure is complete.
1Incline the installation adjustment switch to the RESET  position while pressing the reboot switch with a pointed 
object.
2Release the reboot switch after at least three seconds wh ile still inclining the installation adjustment switch.
3Release the installation adjustment switch when the LED starts flashing.
Installation Adjustment Switch
Reboot Switch LED 

248
List of Factory Default Settings
ItemSetting
LAN Interface Auto
Maximum Packet Size 1500

IPv4 Address Setting Method Auto (DHCP)
IPv4 Address 192.168.100.1
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
AutoIP Enable
IPv4 Address (AutoIP)
 IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual)
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto)
 DNS
Name Server Address 1
Name Server Address 2
Auto-Setting of Name Server 
Address Disable
Host Name
Host Name...

Appendix
6
249
Video  Size  Set1280 x 720 / 640 x 360 / 
320 x 180
 Video Quality: 320x180 6
Video Quality: 640x360 6
Video Quality: 1280x720 6
Video Quality: Digital PTZ 6
Video Size: video Transmission 1280 x 720
Maximum Frame Rate: Video 
Transmission 15.0
Video Size: Upload / 
Memory card 320 x 180
 H.264(1) Video Size 1280 x 720
Bit Rate Control Use bit rate control
Target Bit Rate (kbps) 3072
Video Quality 6
Frame Rate (fps) 15
I Frame Interval (sec) 1
 H.264(2) H.264(2) Disable
Video Size 320 x...

250
Gain9
Exposure Compensation 0
Metering Mode Center-Weighted
Smart Shade Control Disable
Smart Shade Control Level 1 (Mild)
White Balance Auto
R Gain 255
B Gain 255
Noise Reduction Standard
Sharpness 3
Color Saturation 4
Haze Compensation Disable
Haze Compensation Level 4
Clear IR Mode  Disable
Day/Night Day Mode
Use Infrared  Day/Night Operation
Infrared Light Level  1 (Mild)
 Day/Night Mode Focus Day/Night Mode Focus Control Use One-shot AF
Light Source  Fluorescent
 Camera Control Day/Night Day...