Canon Maxify Ib4020 User Guide

Other Problems with Network
Forgot an Access Point Name, SSID, or a Network Key
The Message Is Displayed on the Computer Screen During Setup
The Administrator Password Set to the Printer Was Forgotten
Checking Information about the Network
How to Restore the Printer's Network Settings to Factory Default
471
 

Forgot an Access Point Name, SSID, or a Network Key
Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or
WPA/WPA2 Key)
How to Set an Encryption Key
Cannot Connect with an Access Point to Which a WEP or WPA/WPA2
Key Is Set (You Forgot the WEP or WPA/WPA2 Key)
For information on how to set up the access point, refer to the instruction manual provided with the access
point or contact its manufacturer. Make sure that the computer and the access point can...

Either TKIP (basic encryption) or AES (secure encryption) is selected automatically for the dynamic
encryption method.
For details, see 
Changing the WPA/WPA2 Detailed Settings .
Note
•
This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2-
Personal).
473
 

The Message Is Displayed on the Computer Screen During Setup
The Enter Password Screen Is Displayed During Setup
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Search Screen
"You are connecting the printer to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the printer which has already been
set up to use via a network.
Enter the...

Security is not configured on the access point. The printer can still be used, so continue the setupprocedure to complete it.
Important
•
If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
475
 

The Administrator Password Set to the Printer Was Forgotten
Initialize the printer settings.
Select  All data , then the administrator password reverts to the default.
Reset setting
After initializing the printer settings, perform setup with the Setup CD-ROM or perform it according to the instructions on our website.
476
 

Checking Information about the Network
Checking the IP Address or the MAC Address of the Printer
Checking the IP Address or the MAC Address of the Computer
Checking If the Computer and the Printer, or Computer and the Access Point Can Communicate
Checking the Network Setting Information
Checking the IP Address or the MAC Address of the Printer
To check the IP address or the MAC address of the printer, print out the network setting information using
the operation panel of the printer.
Printing Out Network...

1.Select Command Prompt  as shown below.•
In Windows 8.1 or Windows 8, select  Command Prompt from the Start screen. If  Command
Prompt  is not displayed on the  Start screen, select the  Search charm, then search for
" Command Prompt ".
•
In Windows 7, Windows Vista, or Windows XP, click  Start > All Programs  > Accessories  >
Command Prompt .
2.
Type the ping command and the IP address of the target printer or the target access
point, and then press the  Enter key.
ping XXX.XXX.XXX.XXX...

How to Restore the Printer's Network Settings to Factory Default
Important
•
Note that initialization erases all network settings on the printer, and printing operation from a computer
over network may become impossible. To use the printer over network, perform setup with the Setup CD-ROM or perform it according to the instructions on our website.
Select  Reset LAN settings  on the operation panel of the printer to initialize the network setting.
Reset setting
479
 

Problems with Printing
Printing Does Not Start
Paper Jams
Paper Does Not Feed Properly/"No Paper" Error Occurs
Cannot Print Properly with Automatic Duplex Printing
Printing Stops Before It Is Completed
480