Canon Lbp 3200 User Guide

Installing the CAPT Software3-8
Setting Up the Printing Environment
3
Installing with Plug and Play
IMPORTANT
Before installing the CAPT software with Plug and Play, make sure that the printer is 
properly connected to your computer and that the printer is turned ON.
1Turn ON the computer and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box will appear.
●For Windows  Me
If the following dialog box appears, proceed to Step 2.
If the following dialog box appears, proceed to Step 9.
 

Installing the CAPT Software3-9
Setting Up the Printing Environment
3
●For Windows  98
If the following dialog box appears, click [Next], then proceed to Step 2.
If the following dialog box appears, click [Next], then proceed to Step 9.
2Select [Specify the location of the driver (Advanced)], then 
click [Next].
If you are using Windows 98, select [Search for the best driver for your device. 
(Recommended).].
The dialog box for specifying the search location will appear.
 

Installing the CAPT Software3-10
Setting Up the Printing Environment
3
3Put the supplied User Software for LBP3200 CD-ROM into 
the CD-ROM drive.
4Select [Search for the best driver for your device. 
(Recommended).], remove a checkmark from [Removable 
Media (Floppy, CD-ROM…)] and place a checkmark for 
[Specify a location].
If you are using Windows 98, remove a checkmark from [Floppy disk drives] and 
[CD-ROM drive], and place a checkmark for [Specify a location].
5Click [Browse], then select a folder....

Installing the CAPT Software3-11
Setting Up the Printing Environment
3
6Make sure that the correct folder is displayed in [Specify a 
location], and then click [Next].
7Click [Next].
Installation of the USB class driver will start.
8Click [Finish].
 

Installing the CAPT Software3-12
Setting Up the Printing Environment
3
The printer driver will be detected automatically. Please wait until it is completed.
The [Add New Hardware Wizard] dialog box will appear.
If you are using Windows 98, click [Next].
9Select [Specify the location of the driver (Advanced)], then 
click [Next].
If you are using Windows 98, select [Search for the best driver for your device. 
(Recommended).].
The dialog box for specifying the search location will appear.
 

Installing the CAPT Software3-13
Setting Up the Printing Environment
3
10If the supplied User Software for LBP3200 CD-ROM is not in 
the CD-ROM drive, put it into the CD-ROM drive.
11Select [Search for the best driver for your device. 
(Recommended).], remove a checkmark from [Removable 
Media (Floppy, CD-ROM…)] and place a checkmark for 
[Specify a location].
If you are using Windows 98, remove a checkmark from [Floppy disk drives] and 
[CD-ROM drive], and place a checkmark for [Specify a location]....

Installing the CAPT Software3-14
Setting Up the Printing Environment
3
13Make sure that the correct folder is displayed in [Specify a 
location], and then click [Next].
14Click [Next].
15Enter a new name in [Printer name] if you want to change the 
printer name.
If another printer driver has been already installed in the computer, the message 
 will appear. In this case, select [Yes] or [No].
 

Installing the CAPT Software3-15
Setting Up the Printing Environment
3
16Click [Finish].
Copying files will be started.
17When the dialog box for completing installation appears, click 
[OK].
The [Add New Hardware Wizard] dialog box will appear.
18Click [Finish].
The installation of the USB class driver and the printer driver is completed.
 

Installing the CAPT Software3-16
Setting Up the Printing Environment
3
For Windows 2000
Installing from the CD-ROM
1Make sure that the power switch is turned OFF.
IMPORTANT
Do not turn ON the printer until Step 8 during installation procedure.
2Connect the printer to the computer with the USB cable.
3Turn ON the computer and start up Windows 2000.
4Log on by a user who has an administrators permission.
NOTE
Full Control Permission is required for the installation of the printer driver.
5Put the supplied...

Installing the CAPT Software3-17
Setting Up the Printing Environment
3
6Click [Install a Printer Driver].
The dialog box for confirming the language will appear.
7Confirm the language and click [OK].
The preparation for installation will start.
8When the screen shown below appears, turn ON the printer.
In order to turn ON the printer, press   of the power switch.
The installation of the printer driver and the USB class driver will start 
automatically.
ON
OFF