Canon Lbp 3200 User Guide

Printing on Plain Paper / Heavy Paper / Label / Transparency2-14
Loading and Delivering Paper
2
Printing on Plain Paper / Heavy Paper / Label / 
Transparency
This section describes the procedure for printing on plain paper, heavy paper, 
labels, and transparencies.
For instructions on printing on custom paper, see Printing on Custom Paper, on p. 
2-40.
Loading Paper
The paper sources in which you can load paper are the cassette and the manual 
feed slot. For continuous print, load paper in the cassette....

Printing on Plain Paper / Heavy Paper / Label / Transparency2-15
Loading and Delivering Paper
2
Loading Paper in the Cassette
Follow the procedure below to load paper in the cassette.
Load the paper lengthways in the cassette.
IMPORTANT
•Do not take the cassette out of the printer while printing. It may result in paper jams or 
printer malfunction.
•If you refill the cassette when a few sheets of paper still remain, take out the loaded 
paper once, then align the paper to be refilled and taken out paper...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-16
Loading and Delivering Paper
2
1Pull out the cassette.
2While holding the lock release lever on the paper guide at the 
rear of the cassette, slide the paper guide to the mark 
indicating the desired paper size.
IMPORTANT
If LGL is indicated in the cassette, you can load the legal-size paper in the 
cassette. Whether LGL is indicated in the cassette or not depends on the area 
where you purchased this printer.
ENV. ISO-
C5
ENV. DLLT RA4
B5...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-17
Loading and Delivering Paper
2
NOTE
LGL indicated in the cassette shows legal size, LTR shows letter size, and 
EXEC shows executive size.
3While holding the lock release lever on the paper guide on 
either side of the cassette, slide the paper guide to the mark 
indicating the desired paper size.
The paper guides on the sides of the cassette move together.
When you load the legal-size paper in the cassette on which LGL is indicated, 
slide...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-18
Loading and Delivering Paper
2
CAUTION
Be careful not to cut your hands with the edges of the transparencies or 
labels.
IMPORTANT
•Be sure to fan the transparencies or labels thoroughly before loading them. If they 
are not fanned enough, this may result in double-feeds or paper jams.
•When fanning or aligning the transparencies, try to hold the edges to avoid 
touching the printing surface.
•Take care not to mark or stain the printing...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-19
Loading and Delivering Paper
2
•Double-feeding may occur frequently if the cutting edges of the paper stack are not 
smooth. In this case, thoroughly fan the paper stack, and then align the edges of 
the paper stack on a flat surface.
NOTE
To print on letterhead paper or paper printed with a logo, load the paper so that the 
printing surface faces down and the top edge comes toward the front of the 
cassette.
:Feeding direction
 

Printing on Plain Paper / Heavy Paper / Label / Transparency2-20
Loading and Delivering Paper
2
6Press down the paper stack as shown in the figure, then make 
sure that it does not exceed the load limit mark and that it is 
loaded under the hooks on the paper guides.
Make sure that there is sufficient space between the hooks and paper stack. 
Take out some paper when there is no space.
IMPORTANT
The following shows the cassette capacity. Be sure that the paper stack does not 
exceed the load limit mark of...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-21
Loading and Delivering Paper
2
7Set the cassette in the printer.
Push the cassette into the printer firmly until the front surface of the cassette is 
flush with that of the printer.
Setting Paper in the Manual Feed Slot
Follow the procedure below to set paper in the manual feed slot.
When loading paper in the manual feed slot, be sure to load it in portrait orientation.
IMPORTANT
•In the manual feed slot, you can set only one sheet of paper...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-22
Loading and Delivering Paper
2
NOTE
LGL indicated in the manual feed slot shows legal size, LTR shows letter size, 
and EXEC shows executive size.
2While holding paper with your hands as shown in the figure, 
slowly insert paper with the printing surface face up until it 
hits on the back.
After paper is set, it is fed slightly.
CAUTION
When setting paper, be careful not to cut your hands with the edges of the 
paper.
IMPORTANT
•Set the...

Printing on Plain Paper / Heavy Paper / Label / Transparency2-23
Loading and Delivering Paper
2
NOTE
To print on letterhead paper or paper printed with a logo, set the paper so that the 
printing surface faces up and the top edge comes toward the back of the manual 
feed slot.
Setting Printer Driver and Printing
Follow the procedure below to set the printer driver.
1Select [Print] in the application. Select this printer for [Name] 
and click [Properties].
:Feeding direction