Canon Lbp 3200 User Guide

 
viii 
Illustrations Used in This Manual 
Illustrations used in this manual are for the 220 V model unless otherwise specified. 
For the 120 V model, a cover is attached to the face-down delivery area. 
Displays Used in This Manual 
Screen shots of the computer operation screen used in this manual are those taken 
when the LASER SHOT LBP3200 has operated for Windows 2000.
The buttons which you should press are marked with a   as shown below.
When multiple buttons can be pressed on the screen shot of...

 
ix 
Abbreviations Used in This Manual 
In this manual, product names and model names are abbreviated as follows:
Microsoft 
® 
 Windows 
® 
 95 operating system: Windows 95
Microsoft 
® 
 Windows 
® 
 98 operating system: Windows 98
Microsoft 
® 
 Windows 
® 
 Millennium Edition operating system: Windows Me
Microsoft 
® 
 Windows 
® 
 2000 operating system: Windows 2000
Microsoft 
® 
 Windows
® XP operating system: Windows XP
Microsoft
® Windows® operating system: Windows
LASER SHOT LBP3200: LBP3200
 

x
Legal Notices
FCC (Federal Communications Commission)
Laser Beam Printer, Model F187900
■120 V  model
This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.
This equipment has been tested and found to comply with the limits for a class B digital 
device, pursuant to Part 15 of the...

xi
■220 - 240 V model
This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and if not installed and used in accordance with the instruction manual, 
may cause harmful interference to radio...

xii
Laser Safety (120 V/220 - 240 V models)
Laser radiation could be hazardous to the human body. For this reason, laser 
radiation emitted inside this printer is hermetically sealed within the protective 
housing and external cover. No radiation can leak from the printer in the normal 
operation of the product by the user.
This printer is classified as a Class 1 laser product under IEC60825-1:1993, 
EN60825-1:1994, and as for the U.S.A., it is classified as Class 1 under the Code of 
Federal Regulations,...

xiii
International Energy Star-Program
Trademarks
Canon, the Canon Logo, LASER SHOT, and LBP are trademarks of Canon Inc.
Adobe
® Acrobat is a trademark of Adobe Systems Incorporated.
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and 
other countries.
Other product and company names herein may be the trademarks of their 
respective owners.
Copyright
Copyright 2003 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by...

xiv
Disclaimers
The information in this manual is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS 
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, 
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON 
INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES...

xv
  Important Safety Instructions
Please read these Important Safety Instructions thoroughly before operating the 
printer.
As these instructions are intended to prevent injury to the user or other persons or 
destruction of property, always pay attention to these instructions. Also, since it may 
result in unexpected accidents or injuries, do not perform any operation unless 
otherwise specified in the manual. Improper operation or use of this machine could 
result in personal injury and/or damage...

xvi
CAUTION
•Do not install the printer in unstable locations, such as unsteady platforms or 
inclined floors, or in locations subject to excessive vibrations, as this may cause the 
printer to fall or tip over, resulting in personal injury.
•Never block the ventilation slots on the printer. The vantilation slots are provided for 
proper ventilation of working parts inside the printer. Blocking the vantilation slots 
can cause the printer to overheat, resulting in a fire. Never place the printer on a soft...

xvii -Do not connect one extension cord to another.
-Make sure that the voltage of the power plug is the one indicated in the rating label 
(attached on the back of the printer) when you use the printer.
-Use an extension cord that allows the current value greater than the necessary one 
indicated in the rating label (attached on the back of the printer).
-When you use an extension cord, untie the cord binding, and insert the power plug 
completely into the extension cord outlet to ensure a firm...