Canon Lbp 3200 User Guide

After Completing Installation (Canon LBP3200 Group)3-28
Setting Up the Printing Environment
3
After Completing Installation (Canon LBP3200 Group)
When the installation of the CAPT software is completed, the icon and folder for 
[Canon LBP3200] group will be created.
■For Windows  98/Me/2000
•The [Canon LBP3200] printer icon will be displayed in the [Printers] folder.
•The shortcut of the [Canon LBP3200] folder will be displayed on the desktop.
•The [Canon LBP3200] group will be added into [Programs]...

After Completing Installation (Canon LBP3200 Group)3-29
Setting Up the Printing Environment
3
If you double-click the [Canon LBP3200] folder on the desktop, the icon for each of 
[Canon LBP3200] group will be displayed.
•Canon LBP3200 Uninstallation
Used if you want to uninstall the CAPT software from your computer.
To start up, double-click the icon. (See p. 3-49.)
•Canon LBP3200 Status Window
Shows the printer or printing status with an animation or sound.
You can pause or cancel the print job from...

After Completing Installation (Canon LBP3200 Group)3-30
Setting Up the Printing Environment
3
■For Windows  XP
•The [Canon LBP3200] printer icon will be displayed in the [Printers and Faxes] folder.
•The shortcut of the [Canon LBP3200] folder will be displayed on the desktop.
•The [Canon LBP3200] group will be added into [All Programs] under the [Start] menu.
 

After Completing Installation (Canon LBP3200 Group)3-31
Setting Up the Printing Environment
3
If you double-click the [Canon LBP3200] folder on the desktop, the icon for each of 
[Canon LBP3200] group will be displayed.
•Canon LBP3200 Uninstallation
Used if you want to uninstall the CAPT software from your computer.
To start up, double-click the icon. (See p. 3-49.)
•Canon LBP3200 Status Window
Shows the printer or printing status with an animation or sound.
You can pause or cancel the print job from...

Printing a Test Page3-32
Setting Up the Printing Environment
3
Printing a Test Page
Before using the printer for the first time, be sure to print a test page using the 
following procedure.
NOTE
The screen shots used in this section are from Windows 2000.
1Display the [Printers] or [Printers and Faxes] folder.
For Windows 98/Me/2000: Click the [Start] menu ➞ [Settings] ➞ [Printers].
For Windows XP Professional: Click the [Start] menu ➞ [Printers and Faxes].
For Windows XP Home Edition: Click the [Start]...

Printing a Test Page3-33
Setting Up the Printing Environment
3
2Select the [Canon LBP3200] icon, then select [Properties] 
from the [File] menu.
The [Properties] dialog box for this printer will appear.
3Click [Print Test Page] from the [General] sheet.
Printing a test page will be started.
 

Printing a Test Page3-34
Setting Up the Printing Environment
3
4If the test page is printed properly, click [OK].
If you are using Windows 98/Me, click [Yes].
NOTE
If the test page is not printed properly, uninstall the CAPT software (see  
Installation Problems, on p. 6-22), restart the computer, then start the installation 
procedure again.
 

Using the Printer on a Network3-35
Setting Up the Printing Environment
3
Using the Printer on a Network
If you set this printer as a shared printer, you can use it from other computers to 
which the printer is not connected directly.
If you share this printer in a network, make the settings below. In this manual, the 
computer that is directly connected to this printer is called the print server, and the 
computers that can use this printer over the network are called clients.
When using the print...

Using the Printer on a Network3-36
Setting Up the Printing Environment
3
aa a aLocal install into the print server (Windows 98/Me ➞ p. 3-4, Windows 2000 ➞ p. 
3-16, Windows XP ➞ p. 3-22)
bb b bPrint server settings (Network) (Windows 98/Me ➞ p. 3-36, Windows 2000/XP  
➞ p. 3-40)
cc c cPrint server settings (Printer sharing) (Windows 98/Me ➞ p. 3-39, Windows 
2000/XP ➞ p. 3-42)
dd d dInstall into clients (See p. 3-45.)
IMPORTANT
Windows XP Service Pack 2 and other operating systems have the feature that...

Using the Printer on a Network3-37
Setting Up the Printing Environment
3
2Display the [Configuration] sheet, then click [Add].
The [Select Network Component Type] dialog box will appear.
3Click the [Service] icon, and then click [Add].
4Select [File and printer sharing for Microsoft Networks], then 
click [OK].
The [Select Network Component Type] dialog box will appear first, then the 
display will return to the [Network] dialog box.