Canon LBP 2900 2900i User's Guide

							Installing the CAPT Software3-26
Setting Up the Printing Environment
3
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover.
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer. 
						

							Installing the CAPT Software3-27
Setting Up the Printing Environment
3
5Press the   side of the power switch to turn the printer on.
6Turn the computer on and start up Windows 2000.
7Log on as a user who is a member of the Administrators 
group.
The [Found New Hardware Wizard] dialog box appears.
NOTE
Full Control Permissions are required for the installation of the printer driver.
8Click [Next]. 
						

							Installing the CAPT Software3-28
Setting Up the Printing Environment
3
9Select [Search for a suitable driver for my device 
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.
10Remove the checkmarks from [Floppy disk drives] and 
[CD-ROM drives], place a checkmark next to [Specify a 
location], and then click [Next]. 
						

							Installing the CAPT Software3-29
Setting Up the Printing Environment
3
11Insert the supplied LBP2900/2900i User Software CD-ROM 
into the CD-ROM drive, then click [Browse].
If CD-ROM Setup appears, click [Exit].
12Select [D:\English\Win2K_XP]. Select [CNAB4STK.INF] and 
click [Open].
In this case the CD-ROM drive is assumed to be assigned to D:. The actual 
CD-ROM drive letter may be different depending on the computer you are using.
13Make sure that the correct path is displayed in the [Copy 
manufacturers files from] field, then click [OK].
A dialog box is displayed when the computer finishes searching for the driver files. 
						

							Installing the CAPT Software3-30
Setting Up the Printing Environment
3
14Click [Next].
Windows will begin copying files.
When it has finished, the [Completing the Found New Hardware Wizard] dialog is 
displayed.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
15Click [Finish].
Installation of the USB class driver (supplied with OS) and the printer driver starts 
automatically. 
						

							Installing the CAPT Software3-31
Setting Up the Printing Environment
3
For Windows XP/Server 2003
The screen shots used in this section are from Windows XP.
Installing from CD-ROM Setup
1Make sure that the computer and printer are turned off at the 
power.
2Open the USB cover. 
						

							Installing the CAPT Software3-32
Setting Up the Printing Environment
3
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover.
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer. 
						

							Installing the CAPT Software3-33
Setting Up the Printing Environment
3
5Turn the computer on and start up Windows XP/Server 2003.
IMPORTANT
If the Plug and Play automatic setup wizard appears, click [Cancel] and install the 
CAPT software using the following procedure.
6Log on as a user who is a member of the Administrators 
group.
NOTE
Full Control Permissions are required for the installation of the printer driver.
7Insert the supplied LBP2900/2900i User Software CD-ROM 
into the CD-ROM drive.
If the CD-ROM is already in the drive, eject the CD-ROM and reinsert it into the 
drive again.
The CD-ROM Setup appears automatically.
IMPORTANT
If the CD-ROM Setup does not start automatically, select [Run] from the [Start] 
menu, enter D:\English\CNAB4MNU.exe, and click the [OK] button. (In this case 
the CD-ROM drive is assumed to be assigned to D:. The actual CD-ROM drive 
letter may be different depending on the computer you are using.)
8Click [Install].
A dialog box is displayed to confirm the language. 
						

							Installing the CAPT Software3-34
Setting Up the Printing Environment
3
9Confirm the language and click [Yes].
After the preparation for installation is completed, the CAPT (Canon Advanced 
Printing Technology) software installer starts up, and the [Setup Wizard] dialog 
box appears.
10Click [Next].
The [License Agreement] dialog box is displayed.
11Confirm the contents of the agreement and select [I accept 
the terms in the license agreement], and then click [Next]. 
						

							Installing the CAPT Software3-35
Setting Up the Printing Environment
3
12Place a checkmark next to [Install Printer Driver through a 
USB Connection], then click [Next].
If you are using an operating system equipped with Windows Firewall, such as 
Windows XP Service Pack 2, the following window is displayed. Click [Yes] or 
[No].
Click [Yes] to configure Windows Firewall to unblock communication with client 
computers. Select this option if the computer you are currently installing is a print 
server.
Click [No] to configure Windows Firewall to block communications with client 
computers.
13The message [Installation cannot be stopped once it starts. 
Do you want to continue?] is displayed. Click [Yes].
NOTE
If the [Software Installation] dialog box appears, click [Continue Anyway].