Brother MFC 9010CN User Manual

Safety and legal39
A
CAUTION 
After you have just used the machine, some internal parts of the machine will be extremely hot. 
To prevent injury, when you open the top or back cover (back output tray) of the machine, DO 
NOT touch the shaded parts shown in the illustration.
 
 
 
To prevent injuries, be careful not to put your hands on the edge of the machine under the 
document cover, the scanner, or the top cover as shown in the illustrations.
  
To prevent injuries, be careful not to put your fingers...

40
IMPORTANT
The fuser unit is marked with a Caution label. Please DO NOT remove or damage the label.
 
 
Important safety instructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall outlet before cleaning inside of the machine. DO NOT use liquid or aerosol cleaners. Use a dry, lint-free cloth for cleaning.
5 DO NOT place this product on an unstable cart, stand, or table. The product...

Safety and legal41
A
12 Use the product in a well-ventilated area.
13 The power cord, including extensions, should be no longer than 16.5 feet (5 meters).DO NOT share the same power circuit with other high powered appliances, such as an air 
conditioner, copier, shredder, and so on. If you cannot avoid using the machine with these 
appliances, we recommend that you use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
14 DO NOT place...

42
Federal Communications Commission (FCC) Declaration of 
Conformity (USA only)A
declares, that the products
Product Name: MFC-9010CN
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to...

Safety and legal43
A
Disconnect deviceA
This product must be installed near an AC power outlet that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the AC power outlet to shut off power 
completely.
LAN connectionA
CAUTION 
DO NOT connect this product to a LAN connection that is subject to over-voltages.
 
International ENERGY STAR® Qualification StatementA
The purpose of the International ENERGY STAR® Program is to promote the development and 
popularization of...

44
Libtiff Copyright and LicenseA
Use and Copyright
Copyright© 1988-1997 Sam Leffler
Copyright© 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any 
purpose is hereby granted without fee, provided that (i) the above copyright notices and this 
permission notice appear in all copies of the software and related documentation, and (ii) the 
names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity...

Safety and legal45
A
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Adobe, Flash, Illustrator, PageMaker, Photoshop, PostScript and PostScript 3 are either 
registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or 
other countries.
Microsoft, Windows, Windows Server and Internet Explorer...

46
B
OptionsB
This machine has the following optional accessory. You can increase the capabilities of the 
machine with this item.
OptionsB
SO-DIMM memory
 
 

Options47
B
Memory boardB
MFC-9010CN has 64 MB of standard 
memory and one slot for optional memory 
expansion. You can expand the memory up 
to 576 MB by installing dual in-line memory 
modules (SO-DIMMs). When you add the 
optional memory, it increases the 
performance for both copier and printer 
operations.
In general, the machine uses 
industry-standard SO-DIMM with the 
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256...

48
eHold the SO-DIMM by the edges and 
align the notches in the SO-DIMM with 
the protrusions in the slot. Insert the 
SO-DIMM diagonally (1), then tilt it 
toward the interface board until it clicks 
into place (2).
 
fPut the metal (2) and then the plastic (1)   
SO-DIMM covers back on.
 
gPlug the machine’s power cord back into 
the AC power outlet first, and then 
connect the interface cable. 
hTurn on the machine’s power switch.
Note
To make sure that you have installed the 
SO-DIMM properly, you...