Brother MFC 9010CN User Manual

Loading paper and documents19
2
• with sealing flaps that have not been folded at purchase
• with sealing flaps as shown in figure  below
 
• with each side folded as shown in figure below
 
If you use any of the types of envelopes 
listed above, they may damage your 
machine. This damage may not be 
covered under any Brother warranty or 
service agreement.
Occasionally you may experience paper 
feed problems caused by the thickness, 
size and flap shape of the envelopes you 
are using.
 
Labels2
The...

Chapter 2
20
Loading documents2
Using the automatic 
document feeder (ADF)2
The ADF can hold up to 35 pages and feeds 
each sheet individually. Use standard 20 lb 
(80 g/m
2) paper and always fan the pages 
before putting them in the ADF.
Recommended environment2
IMPORTANT
• DO NOT leave thick documents on the  scanner glass. If you do this, the ADF may 
jam.
• DO NOT use paper that is curled,  wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or...

Loading paper and documents21
2
Using the scanner glass2
You can use the scanner glass to copy or 
scan pages of a book one page at a time.
Documents can be up to 8.5 in. wide and 
11.7 in. long (215.9 mm wide and 297 mm 
long).
Note
To use the scanner glass, the ADF must 
be empty.
 
aLift the document cover.
bUsing the document guidelines on the 
left and top, place the document face 
down in the upper left corner of the 
scanner glass.
 
 
cClose the document cover.
IMPORTANT
If the document is a...

22
3
Paper settings3
Paper Type3
Set up the machine for the type of paper you 
are using. This will give you the best print 
quality.
aPress Menu, 1, 1, 1 . 
Paper
1.Paper Type
bPress  a or  b to choose  Thin, Plain , 
Thick , Thicker  or 
Recycled Paper .
Press  OK.
cPress  Stop/Exit .
Paper Size3
You can use ten sizes of paper for printing 
copies: A4, Letter, Legal, Executive, A5, 
A5 L, A6, B5, B6 and Folio. 
When you change the size of paper in the 
tray, you will also need to change the setting...

General Setup23
3
Ecology features3
Toner Save3
You can save toner using this feature. When 
you set Toner Save to  On, print appears 
lighter. The default setting is  Off.
a Press  Menu, 1, 3, 1. 
Ecology
1.Toner Save
bPress  a or  b to choose  On or  Off .
Press  OK.
cPress  Stop/Exit .
Note
We do not recommend Toner Save for 
printing Photo or Gray Scale images.
 
Sleep Time3
The Sleep Time setting can reduce power 
consumption by turning off the fuser while the 
machine is idle.
You can choose how...

Chapter 3
24
 

Section II
CopyII
Making copies26
 

26
4
How to copy4
Copy mode4
 
1 Stack/Sort
2 Copy ratio and Copy layout
3 Contrast
4 Quality
5 Number of copies
Making a single copy4
aLoad your document in the ADF or on 
the scanner glass.
bPress  Black Start  or Color Start .
Making multiple copies4
aLoad your document in the ADF.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress Black Start  or Color Start .
Note
• To sort your copies, see  Sorting copies 
using the ADF  on page 29.
• If the LCD shows  Please Wait and the...

Making copies27
4
Copy options 
(temporary settings)
4
When you want to quickly change the copy 
settings temporarily for the next copy, use the 
temporary Copy keys. You can use different 
combinations.
 
The machine returns to its default settings 
one minute after copying.
Enlarging or reducing the 
image copied4
You can choose the following enlargement or 
reduction ratios:
* The factory setting is shown in Bold with an 
asterisk.
Custom(25-400%)  allows you to enter a 
ratio from  25% to 400% . To...

Chapter 4
28
Using the Options key4
Use the  Options  key to quickly set the following copy settings temporarily for the next copy.
Press
 
Menu selections Options Page
Press 
a or b, then press  OK
 
Press a or b, then press OK
 
Stack/Sort
(appears when the document 
is in the ADF) Stack
*
Sort 29
Brightness b - onnnn + a
b  - nonnn + a
b  - nnonn + a *
b  - nnnon + a
b  - nnnno + a 30
Contrast b - onnnn + a
b  - nonnn + a
b  - nnonn + a *
b  - nnnon + a
b  - nnnno + a 29
Page Layout Off(1 in 1)*
2 in...