Brother MFC 9010CN User Manual

Making copies29
4
Improving copy quality4
You can choose from a range of quality 
settings. The default setting is  Auto.
„ Auto
Auto is the recommended mode for 
ordinary printouts. Suitable for documents 
that contain both text and photographs.
„ Photo
Suitable for copying photographs.
„ Text
Suitable for documents containing only 
text.
To  temporarily  change the quality setting, 
follow the steps below:
aLoad your document.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress...

Chapter 4
30
To change the  default setting follow the steps 
below:
aPress  Menu, 2, 3. 
Copy
3.Contrast
bPress  a or  b to increase or decrease the 
contrast.
Press  OK.
cPress  Stop/Exit .
Brightness4
Adjust the copy brightness to make copies 
darker or lighter.
To temporarily  change the copy brightness 
setting, follow the steps below:
aLoad your document.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress  Options .
Press  a or  b to choose  Brightness .
Press  OK.
dPress  a...

Making copies31
4
dPress a or  b to choose  2in1(P) , 
2in1(L) , 4in1(P) , 
4in1(L)  or Off(1 in 1) .
Press  OK.
ePress  Black Start  or Color Start  to 
scan the page.
If you placed the document in the ADF, 
the machine scans the pages and starts 
printing.
If you are using the scanner glass, go 
to step f.
fAfter the machine scans the page, press 
1 to scan the next page.
 
Next Page?
1.Yes 2.No
gPlace the next page on the scanner 
glass.
Press  OK.
Repeat steps f and  g for each page of 
the layout....

Chapter 4
32
Out of memory 
message
4
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If you get an  Out of Memory  message 
while scanning a subsequent page, you will 
have the option to press  Black Start or 
Color Start  to copy the pages scanned so 
far, or to press  Stop/Exit to cancel the 
operation.
To gain extra memory:
„ Add optional memory. (See  Memory 
board  on page 47.)
 

Section III
SoftwareIII
Software and Network features34
 

34
5
The User’s Guide on the CD-ROM includes 
the Software User’s Guide  and Network 
User’s Guide  for features available when 
connected to a computer (for example, 
printing and scanning). These guides have 
easy to use links that, when clicked, will take 
you directly to a particular section.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (Windows
®)
„ ControlCenter2 (Macintosh)
„ Network Printing
„ Network Scanning 
Note
See  Accessing the Software User’s Guide...

Section IV
AppendixesIV
Safety and legal36
Options46
Troubleshooting and routine maintenance49
Menu and features112
Specifications120
Glossary131
 

36
A
Choosing a locationA
Put your machine on a flat, level, stable surface that is free of vibration and shocks, such as a 
desk. Put the machine near a standard grounded AC power outlet. Choose a location where the 
temperature remains between 50°F and 90.5 °F (10 °C and 32.5 °C) and the humidity is between 
20% to 80% (without condensation).
WARNING 
DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive 
gasses, moisture or dust.
  
DO NOT place the machine...

Safety and legal37
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance. If you do not follow these safety instructions, there is a possibility of a fire, electrical 
shock, burn or suffocation.
WARNING 
There are high voltage electrodes inside the machine. Before you clean the inside of the 
machine, make sure you have unplugged the power cord from the AC power outlet. Doing this 
will prevent an electrical shock.
 
 
 
DO NOT...

38
 
DO NOT use flammable substances, any type of spray, or an organic solvent/liquid that contains 
alcohol or ammonia to clean the inside or outside of the machine. See Routine maintenance 
on page 72 for how to clean the machine.
 
 
 
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner 
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the 
toner dust with a dry, lint-free soft cloth and dispose of it according to...