Brother MFC 440CN User Manual

PhotoCapture Center®
105
14
PhotoCapture Center® print settings14
You can change the print settings temporarily for the next printing. 
These settings are temporary, and the machine returns to its default settings 180 seconds after 
printing, unless you have set the Mode Timer to 2 minutes or less. (See Mode Timeron page 26.)
Note
You can save the print settings you use most often by setting them as default. (See  Setting 
your changes as new default on page 108.)
 
 
1 No of prints
(For View Photo(s))...

Chapter 14
106
Print Quality14
aPress  a or  b to choose 
Print Quality .
Press  OK.
bPress  a or  b to choose  Normal or 
Photo .
Press  OK.
cIf you do not want to change additional 
settings, press  Color Start to print. 
Paper options14
Paper Type14
aPress a or  b to choose  Paper Type .
Press  OK.
bPress  a or  b to choose the type of 
paper you are using,  Plain Paper, 
Inkjet Paper , Brother Photo  or 
Other Photo . 
Press  OK.
cIf you do not want to change additional 
settings, press  Color Start...

PhotoCapture Center®
107
14
cIf you do not want to change additional 
settings, press Color Start to print.
Color Enhancement (True2Life®)14
The color enhancement (True2Life®) feature 
will produce more vivid images. Your 
photographs will take slightly longer to print.
aPress  a or  b to choose  True2Life .
Press  OK.
bDo one of the following:
„ If you want to customize the White 
Balance, Sharpness or Color 
Density, press  d or  c to choose  On 
and then go to step c.
„ If you do not want to...

Chapter 14
108
Cropping14
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is  On. If you want to print 
the whole image, turn this setting to  Off.
aPress  a or  b to choose  Cropping.
Press  OK.
bPress  a or  b to choose  Off (or On).
Press  OK.
cIf you do not want to change additional 
settings, press  Color Start to print. 
Cropping : On
  14
Cropping: Off  14
Borderless printing14
This feature...

PhotoCapture Center®
109
14
Scan to Card 14
Entering Scan mode14
When you want to scan to card, press (Scan ) to illuminate it in green.
 
The LCD shows:
 
Press  a or  b to choose  Scan to Card .
Press  OK.
If you are not connected to your computer 
only the Scan to Card  selection will appear  on 
the LCD.
(See  Scanning  for Windows
® or Macintosh® 
in the Software User’s Guide on the CD-ROM 
for details about the other menu options.)
How to scan to card14
You can scan black & white and color...

Chapter 14
110
eDo one of the following. „ To change the quality, go to step  f.
„ Press  Black Start  or Color Start  to 
start scanning without changing 
additional settings.
fPress  a or  b to choose 
150 dpi Color , 300 dpi Color , 
600 dpi Color , 200x100 dpi B/W  
or  200 dpi B/W .
Press  OK.
gDo one of the following.
„ To change the file type, go to step  h.
„ Press  Black Start  or Color Start  to 
start scanning without changing 
additional settings.
hPress  a or  b to choose  JPEG, PDF  or...

111
15
15
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
Before Using 
PictBridge
15
PictBridge requirements15
To avoid errors, remember the following 
points:„ The machine and the digital camera must 
be connected using a suitable USB cable.
„ The image file extension must be .JPG 
(Other image file extensions like .JPEG, 
.TIF, .GIF and so on will not be 
recognized).
„ PhotoCapture Center...

Chapter 15
112
Printing Images15
aMake sure that your camera is turned 
off. Connect your camera to the 
PictBridge port on the machine using 
the USB cable.
 
1 PictBridge port
Note
Remove any media cards from the 
machine before connecting the digital 
camera.
 
bTurn on the camera.
When the machine has recognized the 
camera, the LCD shows 
Camera Connected .
When the machine starts printing a 
photo, the LCD will show  Printing.
WARNING 
To prevent damage to your machine, do not 
connect any device...

PictBridge113
15
Understanding the 
Error Messages
15
Once you are familiar with the types of errors 
that can occur while you are using the 
PictBridge, you can easily identify and 
troubleshoot any problems.„ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Wrong USB device
This message will appear if you connect a 
non-PictBridge compatible or broken 
device to the PictBridge port. To clear the 
error, unplug the device from the...

Chapter 15
114