Brother Laserprinter Hl 1650 1670n User Guide
Have a look at the manual Brother Laserprinter Hl 1650 1670n User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 1 ABOUT THIS PRINTER 1-11 E E n n v v i i r r o o n n m m e e n n t t Use the printer only within the following ranges of temperature and humidity. Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F) Ambient humidity: 20% to 80% (without condensation) Do not block the air exit on top of the printer. Do not place objects on top of the printer, especially on the air vent. Ventilate the room in which you use the printer. Do not place the printer where it is exposed to direct sunlight. Use a blind or a heavy curtain to protect the printer from direct sunlight if the printer is unavoidably set up near a window. Do not install the printer near devices that contain magnets or generate magnetic fields. Do not subject the printer to strong physical shocks or vibrations. Do not expose the printer to open flames or salty or corrosive gasses. Place the printer on a flat, horizontal surface. Keep the printer clean. Do not install the printer in a dusty place. Do not install the printer near an air conditioner. Do not place the printer where the air vent of the printer can be obstructed. Keep a gap of approximately 100 mm (4 inches) between the air vent and the wall.
1-12 W W h h a a t t k k i i n n d d o o f f p p a a p p e e r r c c a a n n I I u u s s e e ? ? P P r r i i n n t t m m e e d d i i a a a a n n d d s s i i z z e e The Paper trays and LCD panel descriptions in this manual are named as shown below. Upper paper tray Tray 1 Multi-purpose tray MP tray Optional Lower tray Tray 2 The printer usually loads paper from the installed Multi-purpose tray, Upper paper tray or optional Lower paper tray. Click the check mark in the following table to see the detailed information for each selection. Media typeTray 1 MP tray Tray 2 Duplex printingSelect the Media type from the printer driver Plain paper✔✔✔✔Plain paper Recycled paper✔✔✔ ✔Plain paper Bond paper✔Bond paper Thick paper✔Thick paper or Thicker paper Transparencies✔ up to 10 sheets ✔ Only A4, Letter Transparencies Label✔ Only A4, Letter Plain paper Envelopes✔Envelopes Card stock✔Thick paper or Thicker paper
CHAPTER 1 ABOUT THIS PRINTER 1-13 Upper paper tray (Tray 1) Multi-purpose tray (MP tray) Optional Lower tray unit (Tray 2) Duplex printing Paper size A4, Letter, Legal, 8.5 x 13 in., B5 (JIS), B5 (ISO), Executive, A5, A6, B6 Width: 70 to 216 mm (215 to 8.5 in.) Length: 116 to 356 mm (4.57 to 14.0 in.) A4, Letter, Legal, B5 (JIS), B5 (ISO), Executive, A5 A4, Letter, Legal Capacity 250 sheets (80 g/m2 or 21 lbs.) 100 sheets (80 g/m2 or 21 lbs.) Legal : 30 8.5 x 13 in. : 30 labels : 10 250 sheets (80 g/m2 or 21 lbs.)
1-14 We recommend the following print methods (output tray) for each paper media type: Paper output Notes Media type Face down Face up Plain paper ✔ ✔ 60 g/m2 to 105 g/m2 (16 to 28 lbs.) Thick paper ✔ 105 g/m2 to 161 g/m2 (28 to 43 lbs.) Recycled paper ✔ ✔ Transparencies ✔ OHP films Label ✔ Envelopes ✔ Card stock ✔ You can select the priority of the paper source in the Paper Menu on the Control Panel. For more information about the paper settings, see Chapter 3.
CHAPTER 1 ABOUT THIS PRINTER 1-15 Recommended paper Europe USA Plain paper Xerox Premier 80 g/m2 Xerox Business 80 g/m2 Modo DATACOPY 80 g/m2 IGEPA X-Press 80 g/m2 Xerox 4200DP 20 lb Champion Paper One 20 lb Hammermill Laser Paper 24 lb Recycled paper Steinbis Recycling Copy 80 g/m2 Transparency 3M CG3300 3M CG 3300 Label Avery laser label L7163 Avery laser label #5160 ♦Before you purchase large quantities of paper, please test print a small quantity to ensure that the paper is suitable. ♦Use paper designed for plain paper copying. ♦Use paper that is 75 to 90 g/m2. ♦Use neutral paper; avoid acidic or alkaline paper. ♦Use Long grain paper. ♦Use paper with a moisture content of approximately 5%.
1-16 ™ Printable area The figure below shows the printable area. Por tra it USA/Canada Europe/other countries 1 0.17 inch (4.2 mm) 4.2 mm 2 0.25 inch (6.35 mm) 6.01 mm 3 0.17 inch (4.2 mm) 4.2 mm 4 0.25 inch (6.35 mm) 6.01 mm Fig. 1-4 Landscape USA/Canada Europe/other countries 1 0.17 inch (4.2 mm) 4.2 mm 2 0.2 inch (5.08 mm) 5.0 mm 3 0.17 inch (4.2 mm) 4.2 mm 4 0.2 inch (5.08 mm) 5.0 mm Fig. 1-5 1 34 2 34 1 2
CHAPTER 1 ABOUT THIS PRINTER 1-17 P P r r i i n n t t i i n n g g f f r r o o m m t t h h e e P P a a p p e e r r c c a a s s s s e e t t t t e e ☛ ☛☛ ☛ 1.Pull the paper cassette out of the printer. Fig. 1-6 ☛ ☛☛ ☛ 2.While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that they fit correctly into the slots. Fig. 1-7
1-18 For Legal or 8.5 x 13 in. paper While pressing the Universal guide release lever, extend the rear of the Paper cassette. Fig. 1-8 ☛ ☛☛ ☛ 3.Load paper in the paper cassette. Check that the paper is flat and below the limit mark. Fig. 1-9
CHAPTER 1 ABOUT THIS PRINTER 1-19 ✒ ✒✒ ✒ Note Do not load more than 250 sheets of paper (80 g/m2 or 21 lb.) in the cassette or paper jams may occur. Paper can be loaded up to the lines on the sliding guide. ☛ ☛☛ ☛ 4.Install the paper cassette into the printer. ✒ ✒✒ ✒ Note •Extend the Extension flap to prevent the paper from sliding off the face down output tray. •If you choose not to extend the Extension flap, we recommend that you remove printed pages immediately after they exit the printer. When you print on transparencies, use the Face down output tray. Fig. 1-10
1-20 ☛ ☛☛ ☛ 5.Change the following settings in the printer driver Properties tab. Select the paper size, media type etc. Select the Paper source. Select the Paper size. Select the Paper source etc.