Brother Laserprinter Hl 1650 1670n User Guide
Have a look at the manual Brother Laserprinter Hl 1650 1670n User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 3 CONTROL PANEL 3-31 ™ INTERFACE Setting Menu Description AUTO IF TIME = 1:5:99 (sec) You must set the timeout period for the auto interface selection. INPUT BUFFER = Level1:5:15 Increase or decrease the input buffer capacity. RESTART PRINTER? When using the parallel interface Sub-setting Menu Description HIGH SPEED =ON/OFF Turns the high speed parallel communications ON/OFF. PARALLEL BI-DIR=ON/OFF =ON/OFF Turns the bi-directional parallel communications ON/OFF.
USER’S GUIDE 3-32 ™ RESET MENU Setting Menu Description RESET PRINTER Resets the printer and restores all printer settings – including command settings – to settings you have previously made with the control panel switches. FACTORY RESET Resets the printer and restores all printer settings – including command settings – to the factory settings. See “List of Factory Settings”.
CHAPTER 3 CONTROL PANEL 3-33 ™ Set IP Address INFORMATION ↓Press the + or – switch to select the “NETWORK” menu. NETWORK ↓Press the Set switch. TCP/IP ↓Press the Set switch. TCP/IP ENABLE ↓Press the + switch. IP ADDRESS= ↓Press the Set switch. 192.0.0.192 ✲ ↓ The last number in the digit which you can change is blinking. Press the + or – switch to increase or decrease the number. Press the Set switch to go to next digit. 123.0.0.192 ↓Repeat this until you have set your IP address. 123.45.67.89 ↓Press the Set switch to complete the IP address. 123.45.67.89 ✲An asterisk appears at the end of the display.
USER’S GUIDE 3-34 ™ About Emulation Modes This printer has the following emulation modes. ♦ HP LaserJet Mode The HP LaserJet mode (or HP mode) is the emulation mode in which this printer emulates the Hewlett-Packard LaserJet laser printer. Many software applications support this type of laser printer. Using this mode will allow your printer to operate at its optimum performance with those applications. ♦ BR-Script 3 Mode BR-Script is an original page description language and a PostScript language emulation interpreter. This printer supports level 3. The BR-Script interpreter of this printer enables full and satisfactory control of text and graphics on pages. Average users will not need extensive knowledge of the PostScript language. However, if you want to obtain technical information about PostScript commands, see the following commercial manuals: • Adobe Systems Incorporated. PostScript Language Reference Manual, 2nd Edition. Menlo Park: Addison-Wesley Publishing Company, Inc., 1990. • Adobe Systems Incorporated. PostScript Language Program Design. Menlo Park: Addison-Wesley Publishing Company, Inc., 1988. • Adobe Systems Incorporated. PostScript Language Reference Manual. Menlo Park: Addison-Wesley Publishing Company, Inc., 1985. • Adobe Systems Incorporated. PostScript Language Tutorial and Cookbook. Menlo Park: Addison-Wesley Publishing Company, Inc., 1985. • Adobe Systems Incorporated. PostScript Language Reference Manual, third Edition. Addison-Wesley Longman, Inc., 1999.
CHAPTER 3 CONTROL PANEL 3-35 ♦ EPSON FX-850 and IBM Proprinter XL Mode The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer emulates to meet the industry-standard for dot matrix printers of their respective manufacturers. Some applications support these dot matrix printer emulations. Use these emulation modes for optimum performance when printing from those types of applications.
USER’S GUIDE 3-36 ™ List of Factory settings The following table shows the initial factory default settings. Note •The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table. •The following settings cannot be restored to the factory settings with the RESET menu in the “FACTORY SETTINGS” mode: INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local language for display messages. •The COPY setting is always restored to the factory setting when the printer is turned off and on again. •It is not possible to reset NETWORK setting on the Control panel. If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information) hold down the Network Test Button of the Network board (NC-4100h) for more than 5 seconds.
CHAPTER 3 CONTROL PANEL 3-37 MODEMENUFactory Setting SOURCE=AUTO MP FIRST=OFF MP SIZE==A4/LTR MANUAL FEED=OFF PAPER DUPLEX =OFF RESOLUTION=600 HRC=MEDIUM TONER SAVE=OFF QUALITY DENSITY =0 LANGUAGE=ENGLISH LCD DENSITY=0 POWER SAVE TIME=5 MIN. AUTO CONTINUE=OFF LOCK PANEL=OFF REPRINT=ON EMULATION=AUTO (EPSON) SETUP KEEP PCL =OFF
USER’S GUIDE 3-38 MODEMENUFactory Setting MEDIA TYPE=PLAIN PAPER PAPER=A4/LETTER COPIES=1 ORIENTATION=PORTRAIT PRINT POSITIONX OFFSET=0 Y OFFSET=0 AUTO FF TIME=5 FF SUPPRESS=OFF FONT NO.=59 FONT PITCH/POINT=10.00/12.00 SYMBOL/CHARACTER SET=PC8 AU TO L F = O F F AUTO CR=OFF AUTO WRAP=OFF AUTO SKI=ON LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### PRINT MENU HP LASER JET LINES=####
CHAPTER 3 CONTROL PANEL 3-39 MODEMENUFactory Setting FONT NO.=59 FONT PITCH/POINT=10.00/12.00 SYMBOL/CHARACTER SET=US ASCII AU TO L F = O F F AUTO MASK=OFF LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### EPSON FX-850 LINES=#### FONT NO.=59 FONT PITCH/POINT=10.00/12.00 SYMBOL/CHARACTER SET=PC8 AU TO L F = O F F AUTO CR=OFF LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### IBM PROPRINTER LINES=####
USER’S GUIDE 3-40 MODEMENUFactory Setting ERROR PRINT=OFFBR-SCRIPT APT=OFF TCP/IP ENABLE=ON IP METHOD=AUTO IP ADDRESS=192.0.0.192 SUBNET MASK=0.0.0.0 GATEWAY=0.0.0.0 IP BOOT TRIES=3 TCP/IP IP METHOD=AUTO NETWARE ENABLE=ONNETWARE NEE FRAME=AUTO APPLETALK=ON NETBEUI=ON DLC/LLC=ON BANYAN=ON LAT=ON NETBIOS/IP=ON NETWORK ENET =AUTO