Brother Laserprinter Hl 1650 1670n User Guide
Have a look at the manual Brother Laserprinter Hl 1650 1670n User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix–30 IMPORTANT - Wiring Information (For U.K. only) If the power cord supplied with this printer is not suitable for your electrical outlet, remove the plug from the mains cord and fit an appropriate three pin plug. If the replacement plug is intended to take a fuse then fit a fuse with the same rating as the original. If a moulded plug is severed from the power cord then it should be destroyed because a plug with cut wires is dangerous if plugged into a live socket outlet. Do not leave it where a child might find it. In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the same rating as the original fuse. Always replace the fuse cover. Never use a plug with the cover omitted. WARNING - THIS PRINTER MUST BE PROPERLY EARTHED. The wires in the mains cord are coloured in accordance with the following code: Green and yellow: Ground Blue: Neutral Brown: Live The colours of the wiring in the power lead of this printer may not correspond with the markings which identify the terminals in your plug. If you need to fit a different plug, proceed as follows. Remove a length of the cord outer sheath, taking care not to damage the coloured insulation of the wires inside. Cut each of the three wires to the appropriate length. If the construction of the plug permits, leave the green and yellow wire longer than the others so that, in the event that the cord is pulled out of the plug, the green and yellow wire will be the last to disconnect. Remove a short section of the coloured insulation to expose the wires. The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter “E” or by the earth symbol or coloured green or green and yellow.
APPENDIX Appendix–31 The wire which is coloured blue must be connected to the terminal which is marked with the letter “N” or coloured black or blue. The wire which is coloured brown must be connected to the terminal which is marked with the letter “L” or coloured red or brown. The outer sheath of the cord must be secured inside the plug. The coloured wires should not hang out of the plug.
INDEX Index -1 - – switch3-2, 3-11 + + switch3-2, 3-11 A AC power cord1-1 AC power inlet1-9 accessory2-9, 5-1 Apple LaserWriter2-20 automatic e-mail printing2-16 automatic emulation selection2-23 automatic interface selection2-25 B back light3-16 Back switch3-2, 3-13 bitmapped fontAppendix-13 bonus software2-16 BRAdmin professional2-17 BR-SCRIPT3-29 BR-Script 32-1 BR-Script 3 mode3-34, Appendix-11 C carton1-1 CD-ROM1-1, 1-3 character setsAppendix-18, Appendix-16 components1-1 consumables5-1 control panel1-8 corona wire5-11 cover release button1-8 D data lamp3-14 Device Options2-7 document1-1 drum unit Drum unit5-1, 5-12 drum unit assembly1-1 duplex2-5 duplex printing1-39 duplex tray1-9 E emulation mode3-34, Appendix-11 envelopes1-25 environment1-11 EPSON FX-8503-27 EPSON FX-850 mode3-35, Appendix-12 error messages6-1 extension flap1-8 F face down output tray1-8face up output tray1-9, 1-37 face up printing1-37 face up tray extension1-9 factory reset3-32 factory setting2-26, 3-36 fixing unit5-25 front cover1-8 G Go switch3-2, 3-3 H HP-LaserJet mode3-34, Appendix-11 HQ12002-5 I IBM PROPRINTER3-28 IBM Proprinter XL mode3-35, Appendix-12 information mode3-21 interface cover1-9 interface mode3-31 IP address3-33 J Job Cancel switch3-2, 3-4 L labels1-31 LCD3-15, 6-1 LCD display3-15 LED3-14 lower tray unit4-2 LT-5004-2 M Macintosh2-20 maintenance message6-3 manual feed1-42 memory4-10 multi-purpose tray Multi-purpose tray1-8, 1-21, 1-27 multi-purpose tray extension1-8 N NC-4100h4-5 Network2-17, 3-40 Network board4-5 network mode3-30 O options4-1 P panel setting3-20 paper3-37 paper adjustment lever for duplex printing1-9
INDEX Index -2 paper cassette1-1, 1-8, 1-17 paper feeding kit5-25 paper jam6-6 parallel cable1-2 parallel interface connector1-9 PCB access plate1-9 PCL62-1 power supply1-10 power switch1-9 PPD2-20, 2-21 primary corona wire5-23 print media1-12, Appendix-5 print menu3-38 print menu mode3-24 print quality2-5 printable area1-16 printer driver2-1, 2-3, 2-11 printer status message3-17 Q quality3-37 R RAM4-9 REPLACE FUSER5-25 REPLACE LASER5-25 REPLACE PF KIT15-25 REPLACE PF KIT25-25 reprint2-8, 2-15, 3-5, 3-6 Reprint switch3-2, 3-5 reset menu mode3-32reset printer3-32 S scalable fontAppendix-13 scanner unit5-25 scanner window5-20 secure data3-8 service call message6-4 Set switch3-2, 3-12 setup3-37 Storage Manager2-17 switch3-2 symbol setAppendix-16, Appendix-18 T TCP/IP3-30 toner cartridge5-1, 5-3 TONER LOW5-4 transparencies1-31 U universal guide1-18 USB connector1-9 W watermark2-6 USER’S GUIDE