Brother Laserprinter Hl 1650 1670n User Guide

							Appendix–20
The following table shows characters available only in the corresponding character
set. The numbers at the top of the table are code values with which characters are to
be replaced in the Roman 8 character set. For other characters, see the Roman 8
character set. 
						

							APPENDIX
Appendix–21
♦ HP LaserJet IIP/6P, EPSON FX-850, IBM Proprinter XL
♦ EPSON FX-850 
						

							Appendix–22
The following table shows characters available only in the corresponding
character set. The numbers at the top of the table are code values with
which characters are to be replaced in the US ASCII character set. For other
characters, see the US ASCII character set. 
						

							APPENDIX
Appendix–23
T T
r r
a a
d d
e e
m m
a a
r r
k k
s s
The Brother logo is a registered trademark of Brother Industries, Ltd.
Apple, the Apple Logo, and Macintosh are registered trademarks in the United
States and other countries, and TrueType is a trademark of Apple Computer, Inc.
Epson is a registered trademark and FX-80 and FX-850 are trademarks of Seiko
Epson Corporation.
Hewlett Packard is a registered trademark and HP LaserJet 6P, 6L, 5P, 5L, 4, 4L 4P,
III, IIIP, II, and IIP are trademarks of Hewlett-Packard Company.
IBM, IBM PC, and Proprinter are registered trademarks of International Business
Machines Corporation.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation. Windows
is a registered trademark of Microsoft Corporation in the U.S. and other countries.
E
NERGY STA R is a U.S. registered mark.
All other brand and product names mentioned in this User’s Guide are registered
♦ Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been compiled and
published, covering the latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to
change without notice.
Brother reserves the right to make changes without notice in the specifications and
materials contained herein and shall not be responsible for any damages (including
consequential) caused by reliance on the materials presented, including but not
limited to typographical and other errors relating to the publication.
©2000 Brother Industries Ltd. 
						

							Appendix–24
R R
e e
g g
u u
l l
a a
t t
i i
o o
n n
s s
Federal Communications Commission(FCC) Declaration of Conformity
(For USA Only)
Responsible Party : Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911, USA
TEL : (908) 704-1700
declares, that the products
Product Name : Brother Laser Printer HL-1650, HL-1670N
Model Numbers :  HL-16
Product Options :  ALL
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 
						

							APPENDIX
Appendix–25
Important
A shielded interface cable should be used in order to ensure compliance with the
limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd. could
void the user’s authority to operate the equipment.
Industry Canada Compliance Statement (For Canada Only)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
International E
NERGY STA R Compliance Statement
The purpose of the International 
ENERGY STAR Program is to promote the development
and popularization of energy-efficient office equipments.
As an 
ENERGY STAR Partner, Brother Industries, Ltd. has determined that this product
meets the 
ENERGY STAR guidelines for energy efficiency.
Laser Safety (For 100–120 V Model Only)
This printer is certified as a Class I laser product under the U.S. Department of
Health and Human Services (DHHS) Radiation Performance Standard according to
the Radiation Control for Health and Safety Act of 1968. This means that the printer
does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation. 
						

							Appendix–26
FDA Regulations (For 100-120 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser
products manufactured on and after August 2, 1976. Compliance is mandatory for
products marketed in the United States. One of the following labels on the back of
the printer indicates compliance with the FDA regulations and must be attached to
laser products marketed in the United States.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J
MANUFACTURED:
BROTHER INDUSTRIES LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J
 Wa r n i n g
Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure. 
						

							APPENDIX
Appendix–27
Declaration of Conformity (For Europe)
We, Brother Industries, Ltd.,
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
declare that this product is in conformity with the following normative documents.
Safety: EN 60950, EN 60825
EMC: EN 55022 Class B, EN 55024
EN 61000-3-2, EN 61000-3-3
following the provisions of the Low Voltage Directive 73/23/EEC and the
Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC
and 92/31/EEC).
Issued by:
Brother Industries, Ltd.
Information & Document Company 
						

							Appendix–28
IEC 60825 Specification (For 220–240 V Model Only)
This printer is a Class 1 laser product as defined in IEC 60825 specifications.  The
label shown below is attached in countries where it is required.
CLASS 1LASER PRODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
This printer has a Class 3B Laser Diode that emits invisible laser radiation in the
Scanner Unit. The Scanner Unit should not be opened under any circumstances.
!Caution
Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
( For Finland and Sweden )
  LUOKAN 1 LASERLAITE
  KLASS 1 LASER APPARAT
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
Varning – Om apparaten används på annat sätt än i denna Bruksanvisning
specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider
gränsen för laserklass 1.
Radio Interference (220-240 V Model Only)
This printer complies with EN55022(CISPR Publication 22)/Class B.
Before this product is used, ensure that you use a double-shielded interface cable
with twisted-pair conductors and that it is marked “IEEE 1284-compliant.” We
recommend to use a parallel cable that is 2.0 meters (6 1/2 feet) or less. 
						

							APPENDIX
Appendix–29
IMPORTANT - For Your Safety
To ensure safe operation the three-pin electrical plug supplied must be inserted only
into a standard three-pin power point that is properly grounded through normal
household wiring.
Extension cords used with the equipment must be three-pin plug type and correctly
wired to provide proper grounding. Incorrectly wired extension cords may cause
personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is
grounded and that the installation is completely safe. For your safety, if in any doubt
about the effective grounding of the power, consult a qualified electrician.
Disconnect device
This printer must be installed near a power outlet which is easily accessible. In case
of emergencies, you must disconnect the power cord from the power outlet in order
to shut off power completely.
LAN Connection
!Caution
Connect this product to the LAN connection which is not subjected to
overvoltages.
Geräuschemission / Acoustic Noise Emission (For Germany Only)
Lpa < 70 dB (A) DIN 45635-19-01-KL2
IT power system (For Norway Only)
This product is also designed for IT power system with phase to phase voltage 230
V.