Brother Hl4570cdw Owners Manual

							Control Panel 
75
3
HP LaserJet Font No. I000.../I059*.../I071
Font Pitch 0.44/10*.../99.99
Font Point 4.00/12*.../999.75
Symbol SetPC-8*... Sets the symbol set or the character 
set.
Table PrintPrints code table. 
If Change Emulation appears on 
the LCD, choose Auto or 
HP LaserJet in Emulation of 
Print Menu.
(See page 74.)
Auto LFOff*/OnON: CR i CR+LF, OFF: CR i CR
Auto CROff*/OnON: LF i LF+CR, FF i FF+CR, or 
VT i VT+CR 
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAPOff*/OnChooses whether a line feed and 
carriage return will happen when the 
machine reaches the right margin.
Auto SKIPOn*/OffChooses whether a line feed and 
carriage return will happen when the 
machine position reaches the bottom 
margin.
Left Margin ##Sets the left margin at column 0 to 70 
columns at 10 cpi.
Right Margin ##Sets the right margin at column 10 to 
80 columns at 10 cpi.
Top Margin #.##Sets the top margin at a distance 
from the top edge of the paper: 0, 
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The 
default setting is 0.5 inches.
Bottom Margin #.##Sets the bottom margin at a distance 
from the bottom edge of the paper: 0, 
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The 
default setting is 0.5 inches.
Lines ###
Sets the number of lines on each 
page from 5 to 128 lines.
BR-Script 3 Error PrintOn*/Off
CAPTOff*/On
Print Menu (continued)
Submenu Menu Selections Options Descriptions
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
76
3
Network for HL-4150CDN users3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static you will need to manually 
enter an IP address from the machines control panel.
Submenu Menu Selections Options Descriptions
TCP/IP Boot MethodAuto*/Static/RARP/
BOOTP/DHCP Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767Specifies the number of setting trials 
when the Boot Method allows 
automatic IP setting.
APIPAOn*/OffAutomatically allocates the IP 
address from the link-local address 
range.
1
IPv6Off*/OnSets use of IPv6 protocol.
EthernetAuto*/100B-FD/100B-HD/
10B-FD/10B-HD Chooses Ethernet link mode.
Status Active 100B-FD/
Active 100B-HD/
Active 10B-FD/
Active 10B-HD/
Inactive Shows Ethernet link status.
MAC AddressShows MAC address of the machine.
Network ResetRestores all network settings of the internal print server to the factory default.
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
77
3
Network for HL-4570CDW(T) users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot MethodAuto*/Static/RARP/
BOOTP/DHCP Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPAOn*/OffAutomatically allocates the IP 
address from the link-local 
address range.
1
IPv6Off*/OnSets use of IPv6 protocol.
EthernetAuto*/100B-FD/100B-HD/
10B-FD/10B-HD Chooses Ethernet link mode.
Wired StatusActive 100B-FD/
Active 100B-HD/
Active 10B-FD/
Active 10B-HD/
Inactive/Wired OFF Shows Ethernet link status.
MAC AddressShows MAC address of the 
machine.
Set to DefaultRestores wired network settings of the internal print server to the factory default.
Wired EnableOn*/OffChooses Ethernet link mode.
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
78
3
WLAN TCP/IP Boot MethodAuto*/Static/RARP/
BOOTP/DHCP Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPAOn*/OffAutomatically allocates the IP 
address from the link-local 
address range.
1
IPv6Off*/OnEnables or Disables the IPv6 
protocol.
Setup WizardConfigures the wireless network 
settings using the setup wizard.
WPS/AOSSConfigures the wireless network 
settings using WPS or AOSS™ 
method.
WPS w/PIN CodeConfigures the wireless network 
settings using WPS with a PIN 
code.
Network for HL-4570CDW(T) users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
79
3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static you will need to manually 
enter an IP address from the machines control panel.
Reset Menu3
WLAN
(continued)WLAN Status
(Appears only 
when WLAN 
Enable is 
On.)StatusShows wireless Ethernet link 
status.
SignalShows the signal condition 
when Status is Active.
ChannelShows the channel in use when 
Status is Active.
SpeedShows the connecting speed 
when Status is Active.
SSIDShows SSID [uses a maximum 
of 32 digits and characters 0-9, 
a-z and A-Z in ASCII values]
Comm. ModeAd-hoc*/InfrastructureShows the current 
Communication Mode.
MAC AddressShows MAC address of the 
machine.
Set to DefaultRestores wireless network settings of the internal print server to the factory default.
WLAN EnableOff*/OnTurns the wireless interface on 
or off.
Network ResetRestores all network settings of the internal print server to the factory default.
Display Shows Description
NetworkRestores all network settings of the internal print server to the factory default.
Reset PrinterResets the machine and restores all printer settings (including command settings) to 
settings you have previously made with the control panel buttons.
Factory ResetResets the machine and restores the printer settings (including command settings) to the 
factory default settings.
 The factory settings are shown in Bold with an asterisk.
Network for HL-4570CDW(T) users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
80
3
Color Correction3
Submenu Menu Selections Options Descriptions
FrequencyNormal*/Low/OffSets the interval time you want to 
carry out the auto color correction
ColorCalibration CalibrateCarries out calibration to revise the 
colors. (See Color Calibration 
on page 83.)
ResetSets the calibration parameters back 
to the default settings. (See Color 
Calibration on page 83.)
Auto Regist. RegistrationAdjusts the print position of each 
color automatically. (See Auto 
Registration on page 83.)
Manual Regist. Print ChartPrints the chart to manually check 
the registration of the colors. (See 
Manual Registration on page 84.)
Set Registration1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right Enter the correction value on the 
chart you printed from the 
Print Chart. (See Manual 
Registration on page 84.)
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
81
3
Direct Print3
Submenu Menu Selections Options Descriptions
Paper SizeLetter*/Legal/A4/
Executive/JIS B5/B5/
A5/A5 L/JIS B6/B6/A6/
Folio Sets the size of paper for direct print.
Media TypePlain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/
Recycled Paper/
Bond Paper/
Glossy Paper Sets the type of paper for direct print.
Multiple Page1in1*/2in1/4in1/9in1/
16in1/25in1/
1 in 2x2 pages/
1 in 3x3 pages/
1 in 4x4 pages/
1 in 5x5 pages Sets the pattern if you want to print 
multiple pages on a single sheet or 
one page on multiple sheets.
OrientationPortrait*/LandscapeThis machine can print pages in 
portrait or landscape orientation.
CollateOn*/OffSets use of collation printing.
Print QualityNormal*/FineSets the quality of print.
PDF OptionDocument*/
Document&Stamps/
Document&Markup Sets the information you want to add 
to the document.
Index PrintSimple*
/DetailsSets the format of the index for direct 
print. If you choose Details, 
printing time will be longer. (See 
Printing data from a USB flash 
memory drive with direct print 
on page 23.)
 The factory settings are shown in Bold with an asterisk. 
						

							Control Panel 
82
3
Default settings3
The machine has three levels of default settings; the default settings have been set at the factory before 
shipment (see Menu table on page 71).
Network default settings
Factory reset
Settings reset
Note
• You cannot modify the preset default settings.
• Page counter can never be changed.
 
Network default settings3
If you want to reset only the print server back to its default settings (by resetting all network information such 
as the password and IP address), follow these steps:
aPress + or - to choose Network. Press OK.
bPress + or - to choose Network Reset. Press OK.
cPress + to choose Reset.
dPress + to choose Yes. The machine will restart automatically.
Factory Reset3
You can partially reset the machine back to its default printer settings. The settings that will not be reset are 
the Interface, Local Language, Reprint, Set Registration, Setting Lock, Secure Function 
Lock 2.0 and the Network settings:
aPress + or - to choose Reset Menu. Press OK.
bPress + or - to choose Factory Reset. Press OK.
cPress + to choose Reset.
Settings Reset3
This operation will reset all the machine settings back to the settings that were set at the factory:
aDisconnect the network cable from the machine; otherwise the network settings (such as IP address) will 
not be reset.
bPress + or - to choose Reset Menu. Press OK.
cPress + and Cancel at the same time. Press OK after Settings Reset appears.
dPress + to choose Reset.
ePress + to choose Yes. The machine will restart automatically. 
						

							Control Panel 
83
3
Color Calibration3
The output density for each color may vary depending on the environment the machine is in, such as 
temperature and humidity. Calibration helps you to improve the color density.
Note
If you print using the Windows® printer driver, the driver will get the calibration data automatically if both 
Use Calibration Data and Get Device Data Automatically are on. The default settings are on. See 
Color Calibration on page 39.
If you print using the Macintosh printer driver, you need to perform the calibration using the Status Monitor. 
After turning the Status Monitor on, choose Color Calibration from Control menu. See Status Monitor 
on page 61 for how to turn the Status Monitor on.
 
Calibration3
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose ColorCalibration. Press OK.
cPress OK to choose Calibrate.
dPress + to choose Yes.
Reset3
You can reset the calibration parameters back to those set at the factory.
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose ColorCalibration. Press OK.
cPress + or - to choose Reset. Press OK.
dPress + to choose Reset.
Auto Registration3
Registration3
You can adjust the print position of each color automatically.
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose Auto Regist.. Press OK.
cPress OK to choose Registration.
dPress + to choose Yes. 
						

							Control Panel 
84
3
Manual Registration3
When you manually set the color registration, you need to print the color registration chart. Then you are 
required to set parameters to the machine in accordance with the instruction of the color registration chart.
Print Chart3
You can print the color registration chart to manually check the registration of the colors.
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose Manual Regist.. Press OK.
cPress + or - to choose Print Chart. Press OK.
Set Registration3
You can correct the color registration manually.
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose Manual Regist.. Press OK.
cPress + or - to choose Set Registration. Press OK.
dTo set the color registration, follow the instructions on Color Registration Chart.
ePress OK.
Frequency3
You can set how often the color correction (Color Calibration and Auto Registration) occurs. Default setting 
is Normal. The color correction process consumes some amount of the toner. 
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose Frequency. Press OK.
cPress + or - to choose Normal, Low or Off. Press OK.