Brother Hl4570cdw Owners Manual
Have a look at the manual Brother Hl4570cdw Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
85 4 4 This machine has the following optional accessories. You can increase the capabilities of the machine with these items. 1HL-4570CDWT is equipped with the lower tray as standard equipment. Lower tray (LT-300CL)4 One optional lower tray (Tray 2) can be installed, and the lower tray can hold up to 500 sheets of 80 g/m2 (21 lb) paper. When the optional tray is installed, the machine can hold up to 800 sheets of plain 80 g/m 2 (21 lb) paper. If you want to buy the optional lower tray unit, call the dealer you bought the machine from or Brother Customer Service. For setup, see the User’s Guide that we have supplied with the lower tray unit. Option4 Lower tray1SO-DIMM memory LT-300CL See Lower tray (LT-300CL) on this page.See SO-DIMM on page 86.
Option 86 4 SO-DIMM4 The machine has 128 MB of standard memory and one slot for optional memory expansion. You can increase the memory up to a maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory Module). SO-DIMM types4 You can install the following SO-DIMMs: 128 MB Kingston KTH-LJ2015/128 256 MB Kingston KTH-LJ2015/256 128 MB Transcend TS128MHP422A 256 MB Transcend TS256MHP423A Note • For more information, visit the Kingston Technologys Web site at http://www.kingston.com/. • For more information, visit the Transcend Informations Web site at http://www.transcend.com.tw/. In general, the SO-DIMM must have the following specifications: Type: 144-pin and 16-bit output CAS latency: 4 Clock frequency: 267 MHz (533 Mb/s/pin) or more Capacity: 64, 128 or 256 MB Height: 30.0 mm (1.18 in.) DRAM type: DDR2 SDRAM Note • There might be some SO-DIMMs that will not work with the machine. • For more information, call the dealer you bought the machine from or Brother Customer Service.
Option 87 4 Installing extra memory4 Note Always turn off the machine power switch before installing or removing the SO-DIMM. aTurn off the machine power switch, and then unplug the machine. Disconnect all interface cables from the machine. bRemove the plastic (1) and then the metal (2) SO-DIMM covers. cUnpack the SO-DIMM and hold it by its edges. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface. dHold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). 2 1 12
Option 88 4 ePut the metal (2) and then the plastic (1) SO-DIMM covers back on. fReconnect the interface cable to your machine. Plug the machine back in, and then turn on the power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that shows the current memory size. (See Machine Info. on page 71.) 2 1
89 5 5 Replacing consumable items5 You will need to replace the consumable items when the machine indicates that the life of the consumable is over. You can replace the following consumable items by yourself: Routine Maintenance5 Toner cartridge Drum unit See Toner cartridges on page 96. Order No. TN-310BK, TN-315BK, TN-310C, TN-315C, TN-310M, TN-315M, TN-310Y, TN-315YSee Drum unit on page 101. Order No. DR-310CL Belt unit Waste toner box See Belt unit on page 106. Order No. BU-300CLSee Waste toner box on page 110. Order No. WT-300CL
Routine Maintenance 90 5 The following messages appear on the LCD in the Ready state. These messages provide advanced warnings to replace the consumable items before they reach the end of their life. To avoid any inconvenience, you may want to buy spare consumable items before the machine stops printing. 1A4 or Letter size single-sided pages. 2Approx. cartridge yield is declared in accordance with ISO/IEC 19798. 31 page per job 4Drum life is approximate and may vary by type of use. 5The n mark means blinking. 6Standard toner cartridge 7High capacity cartridge LCD messagesConsumable item to replaceApproximate lifeHow to replaceOrder No. Ready Kn Yo Mo Co 5 Toner cartridge, Black2,500 pages126 6,000 pages127 See page 97 TN-310BK6 TN-315BK7 Ready Ko Yo Mo Cn 5 Toner cartridge, Cyan1,500 pages126 3,500 pages127 TN-310C6 TN-315C7 Ready Ko Yo Mn Co 5 Toner cartridge, MagentaTN-310M6 TN-315M7 Ready Ko Yn Mo Co 5 Toner cartridge, YellowTN-310Y6 TN-315Y7 Drum End SoonDrum unit 25,000 pages134See page 102 DR-310CL Belt End SoonBelt unit 50,000 pages 1See page 106 BU-300CL WT Box End SoonWaste toner box 50,000 pages 1See page 110 WT-300CL
Routine Maintenance 91 5 You will need to clean the machine regularly and replace the consumable items when the following messages are displayed on the LCD. LCD messagesConsumable item to replaceApproximate lifeHow to replaceOrder No. Replace Toner Open the Front Cover, replace Toner Cartridge. Black (K)Toner cartridge, Black2,500 pages 125 6,000 pages126 See page 97 TN-310BK5 TN-315BK6 Replace Toner Open the Front Cover, replace Toner Cartridge. Cyan (C)Toner cartridge, Cyan1,500 pages125 3,500 pages126 TN-310C5 TN-315C6 Replace Toner Open the Front Cover, replace Toner Cartridge. Magenta (M)Toner cartridge, MagentaTN-310M5 TN-315M6 Replace Toner Open the Front Cover, replace Toner Cartridge. Yellow (Y)Toner cartridge, YellowTN-310Y5 TN-315Y6 Replace DrumDrum unit 25,000 pages134See page 102 DR-310CL Drum StopDrum unit 25,000 pages 134See page 102 DR-310CL Replace BeltBelt unit 50,000 pages 1See page 106 BU-300CL Replace WT Box Replace the Waste Toner Box. Refer to the Users Guide for instructions. Waste toner box 50,000 pages 1See page 110 WT-300CL
Routine Maintenance 92 51A4 or Letter size single-sided pages. 2Approx. cartridge yield is declared in accordance with ISO/IEC 19798. 31 page per job 4Drum life is approximate and may vary by type of use. 5Standard toner cartridge 6High capacity cartridge Note • Go to http://www.brother.com/original/index.html for instructions on how to return the used toner cartridge to the brother collection program. If you choose not to return your used toner cartridge, please discard the used toner cartridge according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. • We recommend placing used consumable items on a piece of paper to prevent accidentally spilling or scattering the material inside. • If you use paper that is not a direct equivalent for the recommended paper, the life of consumable items and machine parts may be reduced. • The projected life for each of toner cartridges and a waste toner box is based on ISO/IEC 19798. Frequency of replacement will vary depending on the complexity of printed pages, percentage of coverage and type of media used. Replace FuserFuser unit 100,000 pages1Call your dealer or Brother Customer Service for a replacement fuser unit. Replace PF KitMPPaper feeding kit 50,000 pages 1Call your dealer or Brother Customer Service for a replacement PF kit MP. Replace PF Kit1Paper feeding kit 100,000 pages 1Call your dealer or Brother Customer Service for a replacement PF kit1. Replace PF Kit2Paper feeding kit 100,000 pages 1Call your dealer or Brother Customer Service for a replacement PF kit2. Replace LaserLaser unit 100,000 pages 1Call your dealer or Brother Customer Service for a replacement laser unit. LCD messagesConsumable item to replaceApproximate lifeHow to replaceOrder No.
Routine Maintenance 93 5 Before replacing the consumable items5 Please read the following instructions before replacing the consumable items. WARNING DO NOT put a toner cartridge and waste toner box into a fire. It could explode, resulting in injuries. DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock. See Cleaning on page 115 for how to clean the machine. Be careful not to inhale toner. IMPORTANT • Brother strongly recommends that you do not refill the toner cartridge provided with your machine. We also strongly recommend that you continue to use only genuine Brother brand replacement toner cartridges. Use or attempted use of potentially incompatible toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third party toner and/or cartridges. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of genuine Brother supplies. • Put the toner cartridge in the drum unit immediately after you have removed the protective cover. To prevent any degradation to the print quality, DO NOT touch the shaded parts shown in the illustration. • Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit. Inside the machine (Front View)
Routine Maintenance 94 5 • We recommend that you place the drum unit and/or toner cartridge on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner. • Handle the toner cartridge and the waste toner box carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once. • To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. • We recommend that you clean the machine when you replace the consumables. See Cleaning on page 115. • DO NOT unpack a spare toner cartridge until immediately before you put it into the machine. If toner cartridges are left unpacked for a long time the toner life may be shortened. • DO NOT unpack a spare drum unit until immediately before you put it into the machine. If drum unit is exposed to sunlight or room light the unit may be damaged. • While removing the drum unit, handle it carefully because it may contain toner.