Brother Hl 4150cdn User Manual

							Control Panel 75
3
Network for HL-4150CDN users3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found,  an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static yo u will need to manually 
enter an IP address from the machines control panel.
Submenu Menu Selections Options Descriptions
TCP/IP Boot MethodAuto*/Static/ RARP/
BOOTP/ DHCP  Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.### (000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.### (000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.### (000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/ 1/2 /3 *.../ 32767 Specifies the number of setting trials 
when the Boot Method allows 
automatic IP setting.
APIPA On*/Off Automatically allocates the IP 
address from the link-local address 
range.
1
IPv6Off*/On Sets use of IPv6 protocol.
Ethernet Auto*/100B-FD/ 100B-HD/
10B-FD/ 10B-HD  Chooses Ethernet link mode.
Status Active 100B-FD /
Active 100B-HD /
Active 10B-FD/
Active 10B-HD/
Inactive  Shows Ethernet link status.
MAC Address Shows MAC address of the machine.
Network Reset Restores all network settings of the internal print server to the factory default.
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 76
3
Network for HL-4570CDW(T) users
Submenu 1 Submenu 2 Menu Selections OptionsDescriptions
Wired LAN TCP/IP Boot Method Auto*/Static/ RARP/
BOOTP/ DHCP  Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.### (000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.### (000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.### (000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/ 1/2 /3 *.../ 32767 Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPA On*/Off Automatically allocates the IP 
address from the link-local 
address range.
1
IPv6Off*/On Sets use of IPv6 protocol.
Ethernet Auto*/100B-FD/ 100B-HD/
10B-FD/ 10B-HD  Chooses Ethernet link mode.
Wired StatusActive 100B-FD
/
Active 100B-HD /
Active 10B-FD/
Active 10B-HD/
Inactive/ Wired OFF  Shows Ethernet link status.
MAC AddressShows MAC address of the 
machine.
Set to DefaultRestores wired network settings of the internal print server to the factory default.
Wired EnableOn*
/Off Chooses Ethernet link mode.
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 77
3
WLAN TCP/IP Boot MethodAuto*/Static/ RARP/
BOOTP/ DHCP  Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.### (000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.### (000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.### (000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/ 1/2 /3 *.../ 32767 Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPA On*/Off Automatically allocates the IP 
address from the link-local 
address range.
1
IPv6Off*/On Enables or Disables the IPv6 
protocol.
Setup WizardConfigures the wireless network 
settings using the setup wizard.
WPS/AOSS Configures the wireless network 
settings using WPS or AOSS™ 
method.
WPS w/PIN CodeConfigures the wireless network 
settings using WPS with a PIN 
code.
Network for HL-4570CDW(T) users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 78
3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found,  an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static yo u will need to manually 
enter an IP address from the machines control panel.
Reset Menu3
WLAN
(continued)WLAN Status
(Appears only 
when  WLAN 
Enable is 
On.) Status
Shows wireless Ethernet link 
status.
Signal Shows the signal condition 
when Status is Active.
Channel Shows the channel in use when 
Status is Active.
Speed Shows the connecting speed 
when Status is Active.
SSID Shows SSID [uses a maximum 
of 32 digits and characters 0-9, 
a-z and A-Z in ASCII values]
Comm. Mode Ad-hoc*/Infrastructure Shows the current 
Communication Mode.
MAC AddressShows MAC address of the 
machine.
Set to DefaultRestores wireless network settings of the internal print server to the factory default.
WLAN EnableOff*/On Turns the wireless interface on 
or off.
Network ResetRestores all network settings of the internal print server to the factory default.
Display Shows Description
Network Restores all network settings of the internal print server to the factory default.
Reset Printer Resets the machine and restores all printer settings (including command settings) to 
settings you have previously made with the control panel buttons.
Factory Reset Resets the machine and restores the printer settings (including command settings) to the 
factory default settings.
 The factory settings are shown in Bold with an asterisk.
Network for HL-4570CDW(T) users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 79
3
Color Correction3
SubmenuMenu Selections Options Descriptions
Frequency Normal*/Low/ Off Sets the interval time you want to 
carry out the auto color correction
ColorCalibration Calibrate Carries out calibration to revise the 
colors. (See Color Calibration  
on page 82.)
Reset Sets the calibration parameters back 
to the default settings. (See Color 
Calibration  on page 82.)
Auto Regist. Registration Adjusts the print position of each 
color automatically. (See Auto 
Registration  on page 82.)
Manual Regist. Print Chart Prints the chart to manually check 
the registration of the colors. (See 
Manual Registration on page 83.)
Set Registration1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right Enter the correction value on the 
chart you printed from the 
Print Chart. (See 
Manual 
Registration  on page 83.)
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 80
3
Direct Print3
SubmenuMenu Selections Options Descriptions
Paper Size Letter*/Legal/ A4/
Executive/ JIS B5/B5/
A5/ A5 L/ JIS B6/ B6/A6/
Folio  Sets the size of paper for direct print.
Media Type Plain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/
Recycled Paper /
Bond Paper/
Glossy Paper  Sets the type of paper for direct print.
Multiple Page 1in1*/2in1/ 4in1/9in1/
16in1/ 25in1/
1 in 2x2 pages /
1 in 3x3 pages /
1 in 4x4 pages /
1 in 5x5 pages  Sets the pattern if you want to print 
multiple pages on a single sheet or 
one page on multiple sheets.
Orientation Portrait*/Landscape This machine can print pages in 
portrait or landscape orientation.
Collate On*/Off Sets use of collation printing.
Print Quality Normal*/Fine Sets the quality of print.
PDF Option Document*/
Document&Stamps /
Document&Markup  Sets the information you want to add 
to the document.
Index Print Simple*/Details S
 ets the format of the index for direct 
print. If you choose  Details, 
printing time will be longer. (See 
Printing data from a USB flash 
memory drive with direct print  
on page 22.)
 The factory settings are shown in Bold with an asterisk.
 
						

							Control Panel 81
3
Default settings3
The machine has three levels of default settings; the default settings have been set at the factory before 
shipment (see Menu table on page 70).
 Network default settings
 Factory reset
 Settings reset
Note
• You cannot modify the preset default settings.
• Page counter can never be changed.
 
Network default settings3
If you want to reset only the print server back to its default settings (by resetting all network information such 
as the password and IP address), follow these steps:
aPress +  or - to choose  Network. Press OK.
bPress +  or - to choose  Network Reset . Press OK.
cPress +  to choose  Reset.
dPress +  to choose  Yes. The machine will restart automatically.
Factory Reset3
You can partially reset the machine back to its default printer settings. The settings that will not be reset are 
the Interface , Local Language , Reprint , Set Registration , Setting Lock, Secure Function 
Lock 2.0 and the Network settings:
aPress +  or - to choose  Reset Menu . Press OK.
bPress +  or - to choose  Factory Reset . Press OK.
cPress +  to choose  Reset.
Settings Reset3
This operation will reset all the machine settings back to the settings that were set at the factory:
aDisconnect the network cable from the machine; otherwise the network settings (such as IP address) will 
not be reset.
bPress +  or - to choose  Reset Menu . Press OK.
cPress +  and Cancel  at the same time. Press  OK after  Settings Reset  appears.
dPress + to choose  Reset.
ePress +  to choose  Yes. The machine will restart automatically.
 
						

							Control Panel 82
3
Color Calibration3
The output density for each color may vary depending on the environment the machine is in, such as 
temperature and humidity. Calibration helps you to improve the color density.
Note
If you print using the Windows® printer driver, the driver will get the calibration data automatically if both 
Use Calibration Data  and Get Device Data Automatically are on. The default settings are on. See 
Color Calibration  on page 38.
If you print using the Macintosh printer driver, you need to perform the calibration using the Status Monitor. 
After turning the Status Monitor on, choose  Color Calibration from Control  menu. See  Status Monitor  
on page 60 for how to turn the Status Monitor on.
 
Calibration3
aPress +  or - to choose  Color Correction . Press OK.
bPress +  or - to choose  ColorCalibration . Press OK.
cPress OK  to choose Calibrate .
dPress + to choose  Yes.
Reset3
You can reset the calibration parameters back to those set at the factory.
aPress +  or - to choose  Color Correction . Press OK.
bPress +  or - to choose  ColorCalibration . Press OK.
cPress +  or - to choose  Reset. Press  OK.
dPress +  to choose  Reset.
Auto Registration3
Registration3
You can adjust the print position of each color automatically.
aPress +  or - to choose  Color Correction . Press OK.
bPress +  or - to choose  Auto Regist. . Press OK.
cPress OK  to choose Registration.
dPress + to choose  Yes.
 
						

							Control Panel 83
3
Manual Registration3
When you manually set the color registration, you need to print the color registration chart. Then you are 
required to set parameters to the machine in accordance with the instruction of the color registration chart.
Print Chart3
You can print the color registration chart to manually check the registration of the colors.
aPress + or - to choose  Color Correction . Press OK.
bPress +  or - to choose  Manual Regist. . Press OK.
cPress +  or - to choose  Print Chart . Press OK.
Set Registration3
You can correct the color registration manually.
aPress +  or - to choose  Color Correction . Press OK.
bPress +  or - to choose  Manual Regist. . Press OK.
cPress +  or - to choose  Set Registration . Press OK.
dTo set the color registration, follow the instructions on Color Registration Chart.
ePress OK .
Frequency3
You can set how often the color correction (Color Calibration and Auto Registration) occurs. Default setting 
is Normal. The color correction process consumes some amount of the toner. 
aPress + or - to choose  Color Correction . Press OK.
bPress +  or - to choose  Frequency . Press OK.
cPress +  or - to choose  Normal, Low or  Off. Press  OK.
 
						

							84
4
4
This machine has the following optional accessories. You can increase the capabilities of the machine with 
these items.
1HL-4570CDWT is equipped with the lower tray as standard equipment.
Lower tray (LT-300CL)4
One optional lower tray (Tray 2) can be installed, and the lower tray can hold up to 500 sheets of 80 g/m2 
(21 lb) paper. When the optional tray is installed, the machine can hold up to 800 sheets of plain 80 g/m
2 
(21 lb) paper. If you want to buy the optional lower tray unit, call the dealer you bought the machine from or 
Brother Customer Service.
 
For setup, see the User’s Guide that we have supplied with the lower tray unit.
Option4
Lower tray1SO-DIMM memory
LT-300CL
 
 
See Lower tray (LT-300CL)  on this 
page. See 
SO-DIMM  on page 85.