Home > Brother > Printer > Brother Hl 4150cdn User Manual

Brother Hl 4150cdn User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Brother Hl 4150cdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Option 85
    4
    SO-DIMM4
    The machine has 128 MB of standard memory and one slot for optional memory expansion. You can increase 
    the memory up to a maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory 
    Module).
     
    SO-DIMM types4
    You can install the following SO-DIMMs: 128 MB Kingston KTH-LJ2015/128
     256 MB Kingston KTH-LJ2015/256
     128 MB Transcend TS128MHP422A
     256 MB Transcend TS256MHP423A
    Note
    • For more information, visit the Kingston Technologys Web site at http://www.kingston.com/.
    • For more information, visit the Transcend Informations Web site at http://www.transcend.com.tw/.
     
    In general, the SO-DIMM must have the following specifications:
    Type: 144-pin and 16-bit output
    CAS latency: 4
    Clock frequency: 267 MHz (533 Mb/s/pin) or more
    Capacity: 64, 128 or 256 MB
    Height: 30.0 mm (1.18 in.)
    DRAM type: DDR2 SDRAM
    Note
    • There might be some SO-DIMMs that will not work with the machine.
    • For more information, call the dealer you bought the machine from or Brother Customer Service.
     
     
    						
    							Option 86
    4
    Installing extra memory4
    Note
    Always turn off the machine power switch before installing or removing the SO-DIMM.
     
    aTurn off the machine power switch, and then unplug the machine. Disconnect all interface cables from 
    the machine.
    bRemove the plastic (1) and then the metal (2) SO-DIMM covers. 
    cUnpack the SO-DIMM and hold it by its edges.
    IMPORTANT
    To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board 
    surface.
     
    dHold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. 
    Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
     
    21
    12
     
    						
    							Option 87
    4
    ePut the metal (2) and then the plastic (1) SO-DIMM covers back on. 
    fReconnect the interface cable to your machine. Plug the machine back in, and then turn on the power 
    switch.
    Note
    To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that 
    shows the current memory size. (See Machine Info. on page 70.)
     
    2
    1
     
    						
    							88
    5
    5
    Replacing consumable items5
    You will need to replace the consumable items when the machine indicates that the life of the consumable is 
    over. You can replace the following consumable items by yourself:
    Routine Maintenance5
    Toner cartridgeDrum unit
    See  Toner cartridges  on page 95.
    Order No. TN-310BK, TN-315BK, TN-310C, TN-315C,  TN-310M, TN-315M, TN-310Y, TN-315Y See 
    Drum unit  on page 100.
    Order No. DR-310CL
     
     
    Belt unitWaste toner box
    See  Belt unit  on page 105.
    Order No. BU-300CL See 
    Waste toner box  on page 109.
    Order No. WT-300CL
     
     
     
    						
    							Routine Maintenance 89
    5
    The following messages appear on the LCD in the Ready state. These messages provide advanced warnings 
    to replace the consumable items before they reach the end of their life. To avoid any inconvenience, you may 
    want to buy spare consumable items before the machine stops printing.
    1A4 or Letter size single-sided pages. 
    2Approx. cartridge yield is declared in accordance with ISO/IEC 19798.
    31 page per job
    4Drum life is approximate and may vary by type of use.
    5The n mark means blinking.
    6Standard toner cartridge
    7High capacity cartridge
    LCD messagesConsumable 
    item to replaceApproximate lifeHow to replaceOrder No.
    Ready Kn Y o M o C o
    5
    Toner cartridge, 
    Black 2,500 pages126
    6,000 pages127
    See page 96
    TN-310BK6 TN-315BK7
    Ready
    Ko Y o M o C n
    5
    Toner cartridge, 
    Cyan 1,500 pages126
    3,500 pages127
    TN-310C6 TN-315C7
    Ready
    Ko Y o M n C o
    5
    Toner cartridge, 
    Magenta TN-310M6 TN-315M7
    Ready
    Ko Y n M o C o
    5
    Toner cartridge, 
    Yellow TN-310Y6 TN-315Y7
    Drum End Soon
    Drum unit
    25,000 pages134See page 101 DR-310CL
    Belt End Soon Belt unit
    50,000 pages
    1See page 105 BU-300CL
    WT Box End Soon Waste toner box
    50,000 pages
    1See page 109 WT-300CL
     
    						
    							Routine Maintenance 90
    5
    You will need to clean the machine regularly and replace the consumable items when the following messages 
    are displayed on the LCD.
    LCD messagesConsumable 
    item to replaceApproximate lifeHow to replaceOrder No.
    Replace Toner
     
    Open the Front 
    Cover, replace 
    Toner Cartridge. 
    Black (K) Toner cartridge, 
    Black
    2,500 pages
    125
    6,000 pages126
    See page 96
    TN-310BK5 TN-315BK6
    Replace Toner
     
    Open the Front 
    Cover, replace 
    Toner Cartridge. 
    Cyan (C) Toner cartridge, 
    Cyan
    1,500 pages125
    3,500 pages126
    TN-310C5 TN-315C6
    Replace Toner
     
    Open the Front 
    Cover, replace 
    Toner Cartridge. 
    Magenta (M) Toner cartridge, 
    Magenta
    TN-310M5 TN-315M6
    Replace Toner
     
    Open the Front 
    Cover, replace 
    Toner Cartridge. 
    Yellow (Y)Toner cartridge, 
    Yellow
    TN-310Y5 TN-315Y6
    Replace Drum
    Drum unit
    25,000 pages134See page 101 DR-310CL
    Drum Stop Drum unit
    25,000 pages
    134See page 101 DR-310CL
    Replace Belt Belt unit
    50,000 pages
    1See page 105 BU-300CL
    Replace WT Box
    
    Replace the Waste 
    Toner Box. Refer 
    to the Users 
    Guide for 
    instructions.  Waste toner box
    50,000 pages
    1See page 109 WT-300CL
     
    						
    							Routine Maintenance 91
    51A4 or Letter size single-sided pages. 
    2Approx. cartridge yield is declared in accordance with ISO/IEC 19798.
    31 page per job
    4Drum life is approximate and may vary by type of use.
    5Standard toner cartridge
    6High capacity cartridge
    Note
    • Go to http://www.brother.com/original/index.html for instructions on how to return the used toner cartridge 
    to the brother collection program. If you choose not to return your used toner cartridge, please discard the 
    used toner cartridge according to local regulations, keeping it separate from domestic waste. If you have 
    questions, call your local waste disposal office.
    • We recommend placing used consumable items on a piece of paper to prevent accidentally spilling or  scattering the material inside.
    • If you use paper that is not a direct equivalent for the recommended paper, the life of consumable items  and machine parts may be reduced.
    • The projected life for each of toner cartridges and a waste toner box is based on ISO/IEC 19798.  Frequency of replacement will vary depending on the complexity of printed pages, percentage of coverage 
    and type of media used.
     
    Replace Fuser Fuser unit
    100,000 pages1Call your dealer or Brother Customer Service 
    for a replacement fuser unit.
    Replace PF KitMP Paper feeding kit
    50,000 pages
    1Call your dealer or Brother Customer Service 
    for a replacement PF kit MP.
    Replace PF Kit1 Paper feeding kit
    100,000 pages
    1Call your dealer or Brother Customer Service 
    for a replacement PF kit1.
    Replace PF Kit2 Paper feeding kit
    100,000 pages
    1Call your dealer or Brother Customer Service 
    for a replacement PF kit2.
    Replace Laser Laser unit
    100,000 pages
    1Call your dealer or Brother Customer Service 
    for a replacement laser unit.
    LCD messagesConsumable 
    item to replaceApproximate lifeHow to replaceOrder No.
     
    						
    							Routine Maintenance 92
    5
    Before replacing the consumable items5
    Please read the following instructions before replacing the consumable items.
    WARNING 
    DO NOT put a toner cartridge and waste toner box into a fire. It could explode, resulting in injuries.
      
    DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable 
    substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock. See 
    Cleaning on page 114 for how to clean the machine.
      
    Be careful not to inhale toner.
     
    IMPORTANT
    • Brother strongly recommends that you do not refill the toner cartridge provided with your machine. We also 
    strongly recommend that you continue to use only genuine Brother brand replacement toner cartridges. 
    Use or attempted use of potentially incompatible toner and/or cartridges in the Brother machine may cause 
    damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not 
    apply to any problem that is caused by the use of unauthorized third party toner and/or cartridges. To 
    protect your investment and obtain premium performance from the Brother machine, we strongly 
    recommend the use of genuine Brother supplies.
    • Put the toner cartridge in the drum unit immediately after you have removed the protective cover. To  prevent any degradation to the print quality, DO NOT touch the shaded parts shown in the illustration.
    • Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.
       
    Inside the machine (Front View)
     
    						
    							Routine Maintenance 93
    5
    • We recommend that you place the drum unit and/or toner cartridge on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.
    • Handle the toner cartridge and the waste toner box carefully. If toner scatters on your hands or clothes,  wipe or wash it off with cold water at once.
    • To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the  illustration.
     
    • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
    • We recommend that you clean the machine when you replace the consumables. See  Cleaning 
    on page 114.
    • DO NOT unpack a spare toner cartridge until immediately before you put it into the machine. If toner  cartridges are left unpacked for a long time the toner life may be shortened.
    • DO NOT unpack a spare drum unit until immediately before you put it into the machine. If drum unit is  exposed to sunlight or room light the unit may be damaged.
    • While removing the drum unit, handle it carefully because it may contain toner.
     
     
        
    
       
     
    						
    							Routine Maintenance 94
    5
    Note
    • Be sure to seal up the toner cartridge tightly in a suitable bag so that toner powder does not spill out of the cartridge.
    • Go to http://www.brother.com/original/index.html
     for instructions on how to return the used toner cartridge 
    to the brother collection program. If you choose not to return your used toner cartridge, please discard the 
    used toner cartridge according to local regulations, keeping it separate from domestic waste. If you have 
    questions, call your local waste disposal office.
    • Discard the used waste toner box according to local regulations, keeping it separate from domestic waste.  If you have questions, call your local waste disposal office.
    • To ensure high quality printing, we recommend that you use only genuine Brother toner cartridges. When  you want to buy toner cartridges, call your dealer.
     
     
    						
    All Brother manuals Comments (0)

    Related Manuals for Brother Hl 4150cdn User Manual