Barco Rlm R6+ Performer Owners Manual

13. Display Setup
13.8.4 ScenergiX overlap zone (vertical scenergix)
Definitions
Image 13-17
Scenergix overlap zone vertical
Overlap : number of pixels that overlap
Vertical resolution of 1 projector : 768 for Graphics versions, 1024 for Reality versions, 1050 for SXGA projectors.
Total vertical screen resolution : [(Vertical resolution of 1 projector) x 2] minus (overlap)
Vertical Resolution source : number of active lines of the source
Adjustment of Active lines (Lact) of the first projector
1. Go to...

13. Display Setup
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectScenergiX.
5. Press→to select theScenergiXitem.
6. Use↑or↓to selectBorder.
7. PressENTERto select.
A dialog box will be displayed. The actual scenergix border will be displayed.
8. Use↑or↓to select the desired adjustment.
Image 13-18
Adjusting with the arrow keys.
1. When on an adjustment, use the→or←key to move the border line to the desired position.
The border line will move in the desired direction and the light output...

13. Display Setup
Image 13-20
Width set up for projector 1
Image 13-21
Width set up for projector 2
Adjusting by entering the exact values.
1. When on an adjustable item, the input box background will be colored. PressENTER.
The value will change to a 3 digit value and the first digit is selected.
2. Enter a value with the digit keys on the remote control.
The cursor jumps automatically to the next digit.
3. PressENTERto activate the new value.
Use reset to return to the default settings.
13.8.6 Black...

13. Display Setup
2. Press→to select theDisplay setupitem. (image 13-22)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectScenergiX.
5. Press→to select theScenergiXitem.
6. Use↑or↓to selectBlack level.
7. PressENTERto select.
A dialog box will be displayed on a black level background.
Adjust the black level of area A until the black level of area A, B and C or equal (area C should be adjusted on the second
projector). (image 13-23)
Use the up or down arrow key to select the adjustment (All,...

14. Installation menu
14. INSTALLATION MENU
Overview
• Lens adjustments
• Projector address
• Orientation
• Language
• Quick access keys
• RS baudrate
• RS mode
• Automatic startup
• Security
14.1 Lens adjustments
What can be done ?
Motorized lenses can be adjusted in the installation menu or via the dedicated keys on the remote (see chapter “Getting Started”,
“Quick lens adjustment”).
The following parameters can be adjusted:
•Zoom
• Focus
• Shift (also for non motorized lenses)
How to Zoom/focus or...

14. Installation menu
Image 14-1
Lens adjustment
Use 
↑ and ↓ for zoom
Use 
← and → for focus
Press  for SHIFT mode
Press  or 
for test pattern
Image 14-2
Lens adjustment
Use 
↑ and ↓ for vertical shift
Use 
← and → for horizontal shift
Press  for ZOOM/FOCUS
Press  or 
for test pattern
Image 14-3
14.2 Projector address
What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors in a
room.
The projector address setting on the...

14. Installation menu
Image 14-4
Image 14-5Image 14-6
How to change the common address ?
1. PressMENUto activate the menu bar.
2. Press→to select theInstallation. (image 14-7)
3. Press↓to pull down theInstallationmenu
4. Use↑or↓to selectProjector address
5. PressENTER
A dialog box appears on the screen. Use the↑to scroll to Common RC5 address. (image 14-8)
6. PressENTERto go to the edit mode.
The digit will be selected. (image 14-9)
7. Enter the common address, 0 or 1.
Image 14-7
Image 14-8Image 14-9...

14. Installation menu
14.3 Orientation
Projector orientations
Depending on how the projector is oriented, the projector’s internal settings have to be adapted. See also Chapter “Installation”,
“Orientation”.
How to change the orientation ?
1. PressMENUto activate the menu bar.
2. Press→to select theInstallationitem. (image 14-10)
3. Press↓to pull down theInstallationmenu.
4. Use↑or↓to selectOrientation.
5. Press→to pull down the menu.
6. Use↓or↑to select the desired orientation.
7. PressENTERto confirm....

14. Installation menu
Image 14-11
14.5 Quick access keys
What can be done ?
The 3 function keys on top of the RCU (F1, F2 and F3) can be associated with a particular item in one of the menus.
Each function which is not password protected can be associated to a function key.
How to get an overview of the quick access keys ?
1. PressMENUto activate the menu bar.
2. Press→to select theInstallation. (image 14-12)
3. Press↓to pull down theInstallationmenu.
4. Use↑or↓to selectQuick access keys.
5. PressENTER....

14. Installation menu
2. Push the desired function key for 3 seconds.
The menu item is stored behind the quick access key. The messageQuick Access key storedwill be displayed.
14.6 RS baudrate
How to change the RS baudrate?
1. PressMENUto activate the menu bar.
2. Press→to select theInstallationitem. (image 14-14)
3. Press↓to pull down theInstallationmenu.
4. Use↑or↓to selectRS232 baudrate
5. Press→to pull down the menu.
6. Use↓or↑to select the desired baudrate.
7. PressENTERto confirm.
Image 14-14
14.7...