Barco Rlm R6+ Performer Owners Manual

12. Image Files Menu
Image 12-21
12.11Zoom-Focus
What can be done ?
As the projector is equipped with TLD lenses, it is possible to store the zoom and focus setting for each file separately.
How to set ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-22)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectZoom/Focus.
5. Press→to display the choices.
6. Use↑or↓to select desired choice.
Universal
The same zoom/focus setting will be used for all files....

12. Image Files Menu
118R5976816 RLM R6+ PERFORMER 21/12/2005 

13. Display Setup
13. DISPLAY SETUP
Overview
• Full screen representation
• Startup screen
•TextBox
• Menu bar position
• Status bar position
• Sliderbox position
• Auto Image Setup
• Scenergix
13.1 Full screen representation
Purpose of the Full screen representation
TheFull screen representationfunction forces to use the complete native resolution of the DMD panels independently of the native
resolution of the source.
How to enable/disable the full screen representation ?
1. PressMENUto activate the...

13. Display Setup
13.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
This startup screen can be disabled.
How to enable/disable the Startup screen?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-2)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectStartup screen.
5. Press→to pull down the menu.
6. Use↓or↑to selectOnorOff.
On Start up screen will be...

13. Display Setup
Image 13-3
To enable the menus and dialog boxes again, press the TEXT button on the RCU.
13.4 Menu bar position
What can be done ?
The menu bar can be centered vertically. The range is from the top of the screen to the middle of the screen.
This is useful in applications where the top image content is not displayed (e.g. due to blanking).
Image 13-4
Menu bar move
ANormalposition
B New position
How to center the menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay...

13. Display Setup
Image 13-5
13.5 Status bar position
What can be done ?
The status bar (wizard menu) can be centered vertically. Therange is from the bottom of the screen to the middle of the screen.
Image 13-6
Status bar position
This is useful in applications where the bottom image content is not displayed (e.g. due to blanking).
How to center the menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-7)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to...

13. Display Setup
13.6 Sliderbox position
What can be done ?
The sliderbox can be displayed anywhere on the screen. The exact location can be set in sliderbox menu due to the coarse and
fine adjustment.
How to reposition the sliderbox?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-8)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectSliderbox position.
5. PressENTERto confirm.
A sliderbox is displayed. Use the 4 arrow keys to move the box to the...

13. Display Setup
Auto image works only for data signals.
How to set up Auto Image?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-10)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectAuto Image setup.
5. PressENTERto confirm.
A dialog box is displayed. (image 13-11)
6. Check first Enabled.
All other items in the list become available. (image 13-12)
7. Use the arrow keys to select the desired item and pressENTERto enable or disable that item.
Image...

13. Display Setup
During the AUTO IMAGE measuring process the data source disappears temporarily (logo is displayed if back-
ground is set to logo)
13.8 Scenergix
Overview
• Introduction
• Preparations
• ScenergiX overlap zone (horizontal scenergix)
• ScenergiX overlap zone (vertical scenergix)
• ScenergiX border adjustment
• Black level of the images
13.8.1 Introduction
Why ScenergiX ?
When working in a multichannel setup the RLM R6+ Performer and its Soft Edge possibilities enable an image blending...

13. Display Setup
13.8.2 Preparations
ScenergiX Preparations
To ensure proper ScenergiX adjustment, be sure that the following adjustments are done perfectly on all projectors:
• Convergence (Electronic Convergence).
• Geometry
• Color Matching (Color Temperature, Input Balance, Gamma)
13.8.3 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image 13-16
Scenergix set up
Overlap : number of pixels that overlap
Horizontal resolution of 1 projector : 1024 for Graphics versions, 1280 for Reality...