Barco Rlm R6+ Performer Owners Manual

12. Image Files Menu
12. IMAGE FILES MENU
Overview
• Overview of the Image Files Menu
• Introduction to image files
• Load file
• File selection
• Auto Image
• Edit file
• Rename file
• Copy
• Delete
• Automatic load
• Zoom-Focus
12.1 Overview of the Image Files Menu
Overview
• Load
• File selection
-Fit
-All
• Auto Image
- Limited scan
- Full scan
• Edit...
• Rename...
• Copy...
• Delete...
•Zoom/Focus
- Universal
-Unique
12.2 Introduction to image files
Introduction
An image file contains the main...

12. Image Files Menu
Possible file manipulations
The possible file manipulations are :
• Load : installation of a file for a new source
• Edit : editing a loaded file to match the source specifications
• Rename : renaming a file
• Copy: copyingafiletoanewfile
• Delete : deleting an existing file
12.3 Load file
Howtoloadafile?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-1)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectLoad.
5. PressENTER.
A dialog...

12. Image Files Menu
What to do if the image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the settings.
12.4 File selection
How to set the filter ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-3)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectFile selection.
5. Press→to pull down the selection.
6. Use↑or↓to select the desired...

12. Image Files Menu
How to launch Auto Image?
1. PressMENUto activate the Toolbar (image 12-4)
2. Press→to select theImage filesitem
3. Press↓to pull down theImage filesmenu
4. Use↑or↓to selectAuto Image
5. Press→to open the menu
6. Use↑or↓to select the desired file scan method
7. PressENTER
A textbox showing a progress bar is displayed. (image 12-5)
Tip:Press theCancelbutton to cancel the operation.
Image 12-4
Image 12-5
The Auto Image setup in theDisplay setupmenu affect only Auto Image if it is...

12. Image Files Menu
12.6.1 Editing a file
What can be done with the Edit file menu ?
The Edit file menu makes it possible to adapt the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
How to edit a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-6)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectEdit.
5. PressENTER.
A dialog box is displayed. (image 12-7)
6....

12. Image Files Menu
12.6.2 Correct file parameters
What is already available during start up ?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automatically measured and filled in. These values will be available when starting up the EDIT procedure of an active file.
Adjustable items
• Active horizontal pixels : determine the width of the window on the screen. This value is normally given in the source specifi-
cations. If...

12. Image Files Menu
Advanced edit
VCO range
PLL Cpmp
Clamp position
Clamp width0
0
16
16
Horizontal sync polarity
Determined by ADC
Active low
Active high
Input format
RGB
PR/Y/PB
HDTV-PR/Y/PB
Image 12-11
video infoa
Hs Hsb
Image 12-12Hs horizontal sync pulse
aactivelow
b active high
TheVCO rangesetting determines the frequency range of the VCO (Voltage Controlled Oscillator).
TheCpmp(Charge pump current) sets the low pass filter current.
Both VCO range & Cpmp are set by the image file, changing these...

12. Image Files Menu
Image 12-13
Rename custom file
Video625.c01
Video625.c02
Image 12-14
Rename custom file
New name:
Video625.c01
Image 12-15
12.8 Copy
How to copy a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-16)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectcopy.
5. PressENTERto confirm.
Adialog box is displayed. (image 12-17)
6. Use↑or↓to select the desired file.
7. PressENTERto confirm.
A text box is displayed. (image 12-18)
8....

12. Image Files Menu
Image 12-16
Copy file
Video625.c01
Video625.c02
Video625.s01
Video525.s02
SDI_625.s03
SDI_525.s04
1600_48v.s05
1600_60v.s06
1600_65v.s07
1600_70v.s08
Image 12-17
Copy file
New name:
Video625.c01
Image 12-18
If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not displayed, then use thecopyfunction: Copy a standard file (.sxx) which is not
too different of the source to display, then edit this file to...

12. Image Files Menu
Image 12-19
Delete custom file
Active files:
Video625.c01
Video625.c02
All files
Image 12-20
12.10Automatic load
What can be done ?
When automatic load is ’off’, the projector will not load another file when the source is interrupted or when the image is suddenly
changed to another file format. The new image will be displayed with the same settings as the previous source.
When automatic load is ’on’, the projector will follow the new source settings.
How to set up ?
1. PressMENUto...