Barco Rlm R6+ Performer Owners Manual

7. General Menu
7. GENERAL MENU
Overview
• General Menu overview
• Pause
• Freeze
• Standby Timer
• Identification
7.1 General Menu overview
General Menu structure
• Pause
• Freeze
• Standby timer...
• Identification
7.2 Pause
Interrupting the image projection
With the Pause function, the image projection can be stopped, the projector remains with full power for immediate restart. The
projection is interrupted by means of a mechanical shutter cutting the light beam.
How to interrupt the image projection...

7. General Menu
Howtofreezetheimage?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectFreeze. (image 7-2)
5. PressENTERto activate the Freeze function.
Image 7-2
The image can also be frozen using the FREEZE key on the RCU.
7.4 Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a determined
time.
Image 7-3
The...

7. General Menu
Image 7-4
Image 7-5
7.5 Identification
The projector’s identification screen
The identification screen displays the projector’s main characteristics
These are:
•Projectortype
• Projector address
• Software version controller unit
• RS232 Baudrate
• Serial number of projector
How to display the identification screen ?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectIdentification. (image 7-6)
5. PressENTERto...

7. General Menu
Image 7-7
60R5976816 RLM R6+ PERFORMER 21/12/2005 

8. Image Menu
8. IMAGE MENU
Overview
• Image menu overview
• Settings
• Aspect ratio
• Show native resolution
• Keystone correction
• Color Temperature
• Color space
• Filmmode detection
•Blanking
• Input Balance
• AGC on Video
• Manual Gain Control
R5976816 RLM R6+ PERFORMER 21/12/2005
61 

8. Image Menu
8.1 Image menu overview
Overview
• Settings
- Contrast
- Brightness
-Color
-Tint
- Sharpness
- Gamma
-Phase
- Noise Reduction
• Aspect ratio
-Auto
- [4:3]
- [16:9]
- [5:4]
- [2.35]
- [2.88]
- [1.78]
- Letterbox
-Custom
• Show native resolution
-On
-Off
• Keystone...
• Color temperature
- Projector white
- Computer
- Video
-Film
- Broadcast
- Custom...
• Color space
- EBU
-ANSI
-Projector
- Custom...
• Film mode detection
-On
-Off
•Blanking
• Input Balance
-Black..
- White...
-Preset
• AGC...

8. Image Menu
8.2 Settings
Overview
• Contrast
• Brightness
• Color
• Tint (hue)
• Sharpness
• Gamma
• Phase
• Noise reduction
What can be done?
Correct image settings are important for a good image reproduction.
The image settings are made through a dialog box with a scroll bar. Minimal, maximal and the actual values are indicated. These
settings can also be done directly via the RCU’s dedicated buttons, except for the sharpness.
Image 8-1
Image 8-2
8.2.1 Contrast
About Contrast
The contrast function is...

8. Image Menu
8. Use←or→to change the contrast.
The higher the value, the higher the contrast.
Or,
click in the input box and enter the desired value with the numeric keys.
Image 8-3
8.2.2 Brightness
About Brightness
The Brightness function is used to adjust the overall light output.
How to change the Brightness ?
1. PressMENUto activate the menu bar. (image 8-4)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to...

8. Image Menu
8.2.3 Color
About Color setting
The color function is used to adjust color saturation levels.
How to change the Color ?
1. PressMENUto activate the menu bar. (image 8-5)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectColor.
7. PressENTER.
A slider box appears.
8. Use←or→to change the color.
The higher the value, the higher the color.
Or,
click in the input box and enter the desired value...

8. Image Menu
Image 8-6
8.2.5 Sharpness
About Sharpness
The sharpness function is used to adjust the image sharpness of video signals.
How to change the sharpness ?
1. PressMENUto activate the menu bar. (image 8-7)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectSharpness.
7. PressENTER.
A slider box appears.
8. Use←or→to change the sharpness.
The higher the value, the higher the sharpness.
Or,
click in...