Barco Rlm R6+ Performer Owners Manual

2. Installation Guidelines
Image 2-4
Battery cover unlock
Image 2-5
Battery cover removal
Image 2-6
Battery removal
2.5 Stacking projectors
What is possible?
Upto 2 projectors can be stacked on each other without using extra tools or accessories.
How to stack?
Handle as follow:
1. Putthe second projector on the first one so that base plate of thesecond projector matches with the rigging socket of the first
projector. (image 2-7)
2. Turn the rigging sockets of the second projector counter clockwise until...

2. Installation Guidelines
Image 2-7
Stacking two projectors
Image 2-8
Closing the rigging sockets
Image 2-9
Mounting the security chain
18R5976816 RLM R6+ PERFORMER 21/12/2005 

2. Installation Guidelines
2.6 Rigging points and accessories
2.6.1 Overview
Clamps
Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this
position matches with the rigging points.
Consult a professional structural engineer prior to suspending the ceiling mount from a structure not intended for that use. Always
ensure the working load limit of the structure supporting the projector.
WARNING:When mounting the projector to the...

2. Installation Guidelines
Image 2-10
Mounting the clamps fixation
Image 2-11
Mounting the rigging clamp
20R5976816 RLM R6+ PERFORMER 21/12/2005 

3. Connections
3. CONNECTIONS
Overview
• Power connection
• Input Source Connections
• 5-Cable input
• Composite Video Input
• S-Video input
• Digital Visual Interface (DVI) input
• Computer input (RGB analog)
• SDI or HDSDI input
• Communication connection
• Extended configuration
3.1 Power connection
AC power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet.
Plug the female power connector into the male connector at the back of the projector. Fixate the...

3. Connections
3.2 Input Source Connections
Overview
• Input section
• Input facilities
3.2.1 Input section
Input Layers
The input section is divided in layers, each of them regrouping several inputs, this architecture allows the input section to be upgraded
at any time with an optional analog or digital layer.
1. Layer 1: analog layer containing analog data and video inputs.
2. Layer 2: a hybrid layer containing 2 digital and 1 analog input.
3. Layer 3 : (HD)SDI and interconnection.
4. Layer 4 : is...

3. Connections
L1
L2
L3
L4
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-2
Input facilities
L1 Layer 1 = RGBHV + Composite Video + S-Video
L2 Layer 2 = DVI + Computer + RS232IN + RC (wired remote control)
L3 Layer 3 = (HD)SDI in and out + RS232OUT + Power wireless receiver
L4 Layer 4 = Two way hardwired remote + Ethernet
3.3 5-Cable input
Input specifications
The 5-cable...

3. Connections
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-3
5-cable input
Component Video
In Component Video the term component describes a number (3) of elements that are needed to make up the video
picture, these components are R-Y/Y/B-Y. A composite video signal on the other hand contains all the information
needed for the color picture in a single channel of...

3. Connections
Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double line frequency of 32 kHz. The video decoder
used for the video signals is not appropriate for these signals since it can only handle 15 kHz signals. This
signal has therefore to be internally redirected, this is done in theSource selectionmenu by selectingData on
BNC’sinstead ofComponent videoand by selectingPr/Y/Pbin the advanced settings of theImage filemenu.
3.4 Composite Video Input
Input...

3. Connections
3.5 S-Video input
Input specification
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-5
S-Video indication
Pin configuration 4 pin connector
4
31
2
Image 3-6
For S-VideoFor Video
pin 1 : earth (ground) luminance pin 1 : earth (ground) video Y
pin 2 : earth (ground) chrominance pin 2 : earth (ground) video C
pin 3 : luminance signal (Y) 1Vpp ±3dBpin 3 : video Y...