Barco Rlm R6+ Performer Owners Manual

3. Connections
Which signal can be connected ?
Standard S-Video (S-VHS) with separate Y (luma) and C (chroma) signals.
InextendedmodealsoCompositevideocanbeconnectedtotheS-Videoplug.
How to select the S-Video input ?
1. Press4on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
The projector allows the input of more S-Video signals (up to 3 S-Video signals) via the S-Video extended
configuration.
3.6 Digital Visual Interface (DVI) input
DVI
Digital Visual...

3. Connections
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-7
DVI indication. DVI-I type connector analog link(4 pins at the right side of the connector) not supported.
Pin assignment for the DVI connector.
Pin 1
TMDS DATA2-Pin 13
TMDS DATA3+
Pin 2
TMDS DATA2+Pin14 +5Power
Pin 3
TMDS DATA2/4 ShieldPin 15
Ground (for +5V)
Pin 4
TMDS DATA4-Pin 16 Hot Plug Detect
Pin 5
TMDS...

3. Connections
3.7 Computer input (RGB analog)
Input specification
TTL sync input : Umin=2.0V
RGB input = 0.7 V
pp±3dB
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-8
Analog input
What can be connected ?
•RGBHV
•RG
SB
CompositesynconlypossibleonGreen
How to select a computer input ?
1. Press2on the RCU
Note:Another way for selecting this input is viaSourceon the local...

3. Connections
Input specifications
(HD)SDI input : BNC
(HD)SDI output : BNC (= loop through)
typical : 0.8 Vpp
75Ωterminated
output impedance: 75Ω
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-9
(HD)SDI input
How to select the (HD)SDI input
1. Press7on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
3.9 Communication...

3. Connections
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
(a)
(b)
Image 3-10
Applications of the RS232/422 connection
Remote control:
• easy adjustment of projector via IBM PC (or compatible) or MAC connection.
• address range from 0 to 255.
• allow storage of multiple projector configurations and set ups.
• wide range of control possibilities.
Data communication: sending data...

3. Connections
TWO WAY
HARDWIRED REMOTE
21
3
PUSH
R/PRG/YB/PBHs/CsVsVIDEO
(HD)SDI 
IN(HD)SDI OUTS-VIDEO
R.C.
10 BASE-TDVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVERRS 232/422 
OUT
Image 3-11
Wireless receiver connection
3.10 Extended configuration
Overview
• Introduction
• 5-cable extended configuration
• S-Video extended configuration
• Summarizing
3.10.1 Introduction
What can be done ?
The extended configuration allows to connect multiple equal source types to the inputs and allow switching...

3. Connections
Inputs
RGBHVVIDEO
RGBHVRGBHV-
RGSBRGSB---
RGBSRGBS--
ComponentPRYPB---
S-Video----CY
S-VideoC-Y---
CompositeVIDEO-----
Composite-VIDEO----
Composite--VIDEO---
Composite----VIDEO
Signals
Composite-----VIDEO
Table 3-4
Extended configuration of the 5-cable input: the first column gives the possible signals, and the first row the 5 cable input connectors (+ the standard Video BNC).
How to set up the 5-cable extended configuration ?
1. Connect the video or S-video source to the desired BNC...

3. Connections
How to set up the S-Video extended configuration ?
1. Connect the video sources to the desired connector (image 3-15)
Note:An adapter cable is required
ChromaLuma
Video Y
R/PRG/YB/PBHs/CsVsVIDEOS-VIDEO
Video C
Image 3-15
Connecting 2 composite Video signals to the S-Video connector
Multiple video signals can not be visualized simultaneously since there is only one decoder.
3.10.4 Summarizing
Composite video signals
A composite video signal can be entered via 7 different inputs, which gives...

4. Getting Started
4. GETTING STARTED
Overview
• Terminology overview
• Switching on
• Lamp runtime
• Switching to standby
• Switching off
• Temperature error DMD
•UsingtheRCU
• Projector address
• Controlling the projector
• Quick lens adjustment
• Digital Zoom
• Quick Picture in Picture selection
4.1 Terminology overview
Overview
The following table gives an overview of the different functionalities of the keys.
R5976816 RLM R6+ PERFORMER 21/12/2005
35 

4. Getting Started
F1F2
F3
MENU
BACK
ENTER
PAUSEPIP
PHASE
TINT
COLOR
BRIGHTN
CONTR
VOL90
78
56
3
4
12
LOGO
AUTO IMAGE
DIGI
ZOOM
SDI
SB-PC
DVI
VIDEO S-VIDEO
RGBPC
LENS
ZOOMLENS
SHIFT
LENS
FOCUS
TEXT
121
19
2
3
4
5
6
7
8
9
10
11
12
1316
14 15 1820
17
Image 4-1
No.Key nameDescription
1Function keysuser programmable keys with functions for direct access.
2MENUMenu key, to enter or exit the Tool bar menu.
3Address key(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed...