Barco Projector Toolset For Hdx Series Reference Guide

5. Configurator
4. Fill out the complete path to the image (d1) and continue to step 6
Note:Only jpg, gif and pngfile are allowed.
Or,
click on...(d2)
AnOpendialog box opens (d3)
5. Browse to the desired image (d4) and clickOpen(d5).
Or,
double click on the desired image.
6. Width an height of the image can be changed by clicking on the up down control next to width and
height (e). To keep the original aspect ratio of the image, activate buttonKeep aspect ratio(f).
7. To tile the image over the complete...

5. Configurator
5.10.3 Rearrange pictographs in preview pane
How to rearrange
1. Right click in the preview pane but not on a pictograph. (image 5-26)
A context menu opens.
2. SelectRearrange graphs.
The pictographs are rearranged in the preview pane.
Image 5-26
Rearrange pictographs
68R5905073 PROJECTOR TOOLSET 07/06/2011 

6. Configurator, General projector settings
6. CONFIGURATOR, GENERAL
PROJECTOR SETTINGS
Overview
•Startup
• Control interface
• Basic controls, Lamp ON/OFF
• Basic controls, pause setting
• Basic control, Text ON/OFF
• Basic control, Wake up
• Test pattern short cuts
• Advanced controls
• Maintenance
6.1 Start up
How to startup
1. Click on the desired projector graph to display the projector properties. (image 6-1)
2. If the general settings are not open, click on theGeneral Settingstab.
The general...

6. Configurator, General projector settings
6.2 Control interface
Overview
Image 6-2
Control interface
The following items can be consulted and are read only values:
•Projector name: name given to the projector during the creation.
•Serial number: serial number of the connected projector.
•Projector overview
- Inputfiles per input module
- Lamp on or off: indicated by a light beam (yellow). Black means that the lamp is off.
- Name of selected test pattern (with a preview if available) if one is selected....

6. Configurator, General projector settings
• red: lamp is off, text indication: Lamp off
• green: lamp is on, text indication: Lamp on
Image 6-4
Toggling the lamp
1. Press theLampbutton to toggle the lamp on or off.
When toggling the lamp from off to on, a Switching on window is display as long as the lamp is not fully
on. (image 6-5)
Image 6-5
Switching lamp on
6.4 Basic controls, pause setting
What can be done?
The image projection can be interrupted for a short time. The image disappears but full...

6. Configurator, General projector settings
6.5 Basic control, Text ON/OFF
What can be done?
The on-screen text boxes can be switched OFF so that an adjustment during the operation of the projector
is not visible on the screen. The adjustment indication remains visible on the local LCD display.
The text on/off status is indicated by the led color in front of the text button and by the text indication right
next to the button.
• red: text is off, nu boxes visible on the screen. Text indication: Text off
•...

6. Configurator, General projector settings
6.7 Test pattern short cuts
What can be done?
Apredefined pattern can be set immediately on the projection screen and cleared again.
To s e t a p a t t e r n
1. Click on one of the predefined buttons. (image 6-9)
The selected pattern is displayed by the projector when the lamp is on and the shutter is open (not
paused).
The following patterns are available:
- Full screen red
- Full screen green
- Full screen blue
- Full screen black
- Full screen white
-...

6. Configurator, General projector settings
Image 6-10
Advanced controls, input locking
Manual lock
When manual lock is selected, click on the up down control of the spin box until the desired vertical fre-
quency is reached. This frequency will be used to lock on.
6.8.2 No signal
Whatcanhappenwhennosignal
When no signal is available at an input, the output can be set to blue or black or a personal defined logo
(image) can be displayed.
How to set up
1. Click onAdvanced control(1). (image 6-11)...

6. Configurator, General projector settings
Image 6-11
Advanced control, no signal
6.8.3 No signal, custom image setup
What can be done ?
A custom image, logo can be uploaded on the projector and used as projected image when no input signal
is available. Such an upload can only be done when connected via a network.
Uploading via a MAC OS is not possible.
How to upload image
1. While custom image is selected (1), click onSelect(2). (image 6-12)
The requirements for the image are displayed (3).
The...

6. Configurator, General projector settings
Image 6-12
No image, custom image upload
6.8.4 Auto shutdown when no signal
What can be done ?
When no input signal, the projector can automatically shutdown after a certain predefined time.
How to set up
1. WhileNo signalis active, to activate auto shutdown, check the check box in front ofAuto shutdown
enabled. (image 6-13)
76
R5905073 PROJECTOR TOOLSET 07/06/2011